Argos Bush Washer
Argos Bush Washer
Argos Bush Washer
Washing Machine
WMNB712EW
WMNB712EB
You’ll soon be enjoying your new washing machine.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
2
Contents
4 Functions
Functions 18
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
3
Safety information 1
Safety information
Important - Please read these instructions fully before
installing or operating your washing machine
• Pull out its plug and cut off water supply after the • Do not connect the appliance to the power supply
operation. until installation is complete.
• Pets and children may climb into the machine. Check • This appliance is for domestic/household use only
the machine before every operation. and is not suitable for commercial use.
• Glass door may be very hot during the operation. • Check that the water hose joints and connections are
Keep children and pets far away from the machine secure and there are no leaks. If the hoses leak, do not
during the operation. use them until the leaks have been stopped.
• Take care that power voltage and frequency shall be • Do not forget that the packing material of your
identical to those of washing machine. machine may be hazardous for children.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
6 Safety information
Safety information
Important - Please read these instructions fully before
installing or operating your washing machine
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Safety information 7
Getting to know your washing
machine 2
Getting to know your washing machine
You’ll be up and running in no time
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
2 3 4 8 9
1
10
7 7
7 7
Front Back
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Accessories
This machine includes the below accessories, please
install these parts before operating.
• plastic hole plug x 4
• Inlet hose
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
X4
3 4
X4
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Connections Electrical
Any electrical work that is required
Water inlet hose connections to install this washing machine
MUST be carried out by a qualified
Important: This washing machine MUST only be electrician.
connected to a cold water supply.
a: Connect the water inlet hose, the angled
connection attaches to the water inlet on the back of THIS APPLIANCE MUST BE
the washing machine. (7) EARTHED
b: The straight connection attaches to the water supply
valve. (8) Before making any electrical connections, ensure that:
c: Ensure all seals are in place before connecting.
Important: Only tighten the hose connection nut by • The power socket is suitable for the maximum power
hand - do not overtighten. of the washing machine (fuses in the power circuit
must be 13 amp).
7 8 • The supply voltage should be the same as that
indicated in the technical specifications and the
appliance rating plate (located where shown).
• The appliance should be earthed and in compliance
with the applicable law.
• Additional earth cables should not be necessary if the
Drain hose connections plug and socket are earthed. If necessary, an additional
earth cable should be attached to the earth terminal on
Important: The height of the top of the curve in the the back of the washing machine and earthed.
drain hose MUST be between 60 - 100cm from the
• When installed, the power socket must be within easy
floor. (9)
reach.
Important: The end of the water drain hose may be
• The use of adapters, multiple connectors or extension
fitted directly to the waste water outlet hole or a special
cables are not recommended.
apparatus mounted on the outlet bracket of the wash-
stand. • The appliance must be connected to a 220-240 volt
50 cycle AC supply by means of a three pin socket,
Important: Never attempt to extend the water drain
suitably earthed and protected by a 13 amp fuse.
hose by adding extra parts.
• Should the fuse need to be replaced, a 13 amp fuse
9 approved to BS1363/A must be used.
• The plug contains a removable fuse cover that must
be refitted when the fuse is replaced. If the fuse cover
is lost or damaged, the plug must not be used until
a replacement cover has been fitted or the plug is
replaced.
• A damaged plug should be cut off as close to the
plug body as possible, the fuse should be removed and
the plug disposed of safely.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Temperature Auxiliary
Spin Speed Extra Rinse Start/Pause
Selection Function
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
18 Functions
Functions
Simple everyday use
Selecting programme
Select the programme appropriate for your laundry
from the programme table (Page-22). Use the washing water temperature adjustment button
to alter the automatically programmed washing water
temperature.
EXTRA FUNCTIONS
When you select a programme the maximum
Before starting the programme you can optionally temperature for that programme is automatically
select an extra function. selected. To adjust the temperature, press the water
temperature adjustment button until the desired
• Press on the button of extra function you would like
temperature is displayed on the digital display.
to select.
You can gradually reduce the washing water
• If an auxiliary function symbol on the electronic
temperature between the maximum temperature
display flashes continuously, the extra function you
for the selected programme and cold washing
have selected will be activated.
selections by pressing the temperature adjustment
• If an extra function symbol on electronic display button.
blinks, the extra function you have selected will not be
If you have skipped the washing water temperature you
activated.
wanted, keep pressing the washing water temperature
Reason for non-activation: adjustment button until the desired temperature is
• The extra function you want to use in the washing displayed again.
programme you have selected is not applicable. NOTE: 90°C is not displayed in the Wash Temperature
• Your machine has passed over the stage, during Indicators section of the display panel. When the
which the extra function you would like to select temperature value is decreased to 60°, 40°, 30°,
would be implemented. (cold washing) temperature levels by pressing
the temperature adjustment button, the decreased
• It is not compatible with an extra function you have temperature value is displayed on the display panel.
selected previously.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Functions 19
Functions
Simple everyday use
Auxiliary
function
button 3
Auxiliary
function
button 2
4- Pre-wash
You can expose your very dirty laundries to prewashing
operation prior to main washing by using this additional
function.
When using this function, you should put detergent in
front washing compartment of the detergent drawer.
Auxiliary
function
button 4
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
20 Functions
Functions
Simple everyday use
Start/Pause button
By pressing on the Start/Pause button, you may start
the programme you have selected or suspend a
running programme. If you switch your machine to the
standby mode, the Start/Pause led on the electronic
display will blink
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Functions 21
Functions
Simple everyday use
To avoid programme flow from being affected if Your machine will stop by itself as soon as the
programme buttons are pressed or programme button programme you have selected finishes.
is turned when performing a washing operation in your - “End” led will blink on the display panel.
machine, a child lock is available.
Child lock will be activated when both auxiliary
functions 3 and 4 are pressed at the same time for more
than 3 seconds. You can see the auxiliary function leds
on the display when activated.
Cancelling Programme
If you want to cancel any programme running:
1- Switch the programme dial to the “CANCEL” position.
2- Your machine will stop the washing operation and
the programme will be cancelled.
3- To get rid of the water accumulated in the machine
switch the programme dial to any programme.
4- Your machine will perform the necessary discharge
operation and cancel the programme.
5- You can run your machine by selecting a new
programme.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
22 Functions
Functions
Simple everyday use
Cotton 90° 90° 180 2 7,0 Very dirty, cotton and flax textiles. (Underwear, linen, table-
cloths, towels (maximum 3,5 kg), bedclothes, etc.
Pre-wash 60° 171 1&2 7,0 Dirty cotton and flax textiles. (Underwear, linen, tablecloths,
cotton towels (maximum 3,5 kg), bedclothes, etc..
Cotton eco 60° 250 2 7,0 Dirty cotton and flax textiles.
(Underwear, linen, tablecloth, towel (maximum 3,5 kg),
bedclothes, etc.
Easy care 40° 110 2 3,5 Very dirty or synthetic-mixed textiles. (Nylon socks, shirts,
blouses, synthetic-including trousers etc.)
Rinse - 36 - 7,0 If you want to additionally rinse your laundry upon comple-
tion of the washing operation, you may use this programme
for any type of laundry.
Spin - 15 - 7,0 If you want to additionally wring your laundry upon comple-
tion of the washing operation, you may use this programme
for any type of laundry.
Hand wash/ 30° 90 2 2,5 Laundry recommended for hand wash or sensitive laundry.
delicate
Sports wear 30° 80 2 3,5 Sportswear
Mixed 30° 80 2 3,5 Dirty cotton, synthetics, colour and flax textiles can be
washed together.
Blouses / 60° 114 2 3,5 Dirty cotton, synthetic and synthetic-mixed shirts and
shirts blouses can be washed together.
Daily 60 60° 60 2 3,0 You can wash your dirty cotton, colour and flax textiles at
min. 60°C in 60 minutes.
Rapid 15 30° 15 2 2,0 You can wash your slightly stained, cotton, coloured and flax
min. textile within only 15 minutes.
(*) You can use softeners in all programmes (except spinning and draining programmes) optionally. When you arrange the
quantity of the softener, comply with the warning of the softener producer. Fill your softener in the (softener) compartment
of the detergent drawer.
Note: Durations vary according to wash load (weight and type), tap water, ambient temperature and selected extra functions.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Functions 23
Using your washing machine 5
Using your washing machine
Getting the most from your appliance
• Your laundry has product labels on them that specifiy NOTE: Maximum loading capacity may vary
their specifications. Wash or dry your laundry according based on the laundry type you will wash, degree
to the specifciations on the product label. of contamination and the programme you have
chosen. Do not exceed maximum dry loading
• Separate your laundry according to their types
capacity indicated in the programme table for
(cotton, synthetic, sensitive, wool etc.), their
washing programmes.
temperatures (cold, 30°, 40°, 60°, 90°) and degree of
contamination (slightly stained, stained, highly stained). You can take the following table of weights as an
example.
• Never wash your coloured and white laundry
together. • Put each item of laundry separately.
• Wash your coloured laundry separately in the first • Ensure that no laundry is stuck between the cover
washing as they may bleed. and bellow seal when closing the door of your
machine.
• Ensure that there are no metallic materials on your
laundry or in the pockets; if so, take them up. • Push the door of your machine until hearing
thelocking sound to close it.
CAUTION: Faults that will emerge in case of
penetration of foreign substances into your machine • Close the door of your machine properly, otherwise
are not included within the scope of warranty. your machine will not start the washing operation.
• Zip up and button up your laundry.
LAUNDRY TYPE WEIGHT (g)
• Remove the metallic or plastic hooks of tulle curtains Towel 200
or curtains or place them in a washing net or bag and
Linen 500
then muzzle them.
Bathrobe 1200
• Reverse textiles such as pants, knitwear, t-shirt and Quilt cover 700
sweat suit. Pillow slip 200
• Wash socks, handkerchief and suchlike small laundry Underwear 100
in a washing net. Tablecloth 250
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Liquid Detergent
Apparatus
Main wash detergent
compartment
Softener
Compartment
Pre-wash detergent
compartment
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Quick start
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Before cleaning your washing machine. • While closing the pump cover, ensure that the parts
on the inner side of the cover match the holes on the
front panel side. (5-A)
a: Unplug your machine from the mains power supply.
• You can reattach the pump cover in the reverse order
b: Close the water tap. that you removed it.
Water inlet filters
On the tap part of your machine’s water inlet hose Danger of being scalded!
and at the ends of water inlet valves, there are filters The water inside the pump maybe hot- wait
to prevent entrance of the dirt and foreign materials in for it to cool.
the water to the machine. If the machine is unable to
(*) Machinery specifications may vary depending on the
receive sufficient water even though your water tap is
product purchased.
fully opened, filters should be cleaned.
• Remove the water inlet hose.
• Remove the filters found on the water inlet valves by
using a pincer and wash thoroughly with a brush. (1)
• Clean the filters of the water inlet hoses located on
the tap side by removing manually together with the
seal. (2)
• After you clean the filters, you can fit them the same
way as you have removed them.
Pump filter
The pump filter system elongates the life of your pump,
which is used to drain the dirty water. It prevents dirt
entering the pump. Cleaning of your pump filter every
2-3 months is recommended. To clean your pump
filter:
• To open the pump cover, you can use the powder
detergent spade (*) or liquid detergent level plate
coming out of your machine. (1-A & 2-A)
• Before opening the filter cover, place a cup in front of
the filter cover to prevent flow of the remaining water in
the machine.
• Clean the foreign materials in the filter with a brush
and flush with clean water. (3-A)
• Check for the rotation of the pump manually.
• After cleaning the filter, fit the filter cover and tighten it
by rotating it in clockwise direction. (4-A)
• Remove the foreign materials from the filter.
• Do not forget that if you do not fit the filter cover
properly, it will leak water.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Siphon plug
Pull out the detergent drawer. Remove the siphon plug
and clean any residues away. Fit the cleaned siphon
plug in its location. Check it is placed properly. (3)
Cabinet
Clean the exterior surface of the cabinet of your Note: Wipe the door seal ideally after each wash;
machine with lukewarm water and a cleaning
substance that will not damage the cabinet. After rinsing Note: Undertake a maintenance wash every 4-6 weeks
with clean water, wipe it with a soft and dry cloth. with the drum empty. This wash should be undertaken
with lime scale and detergent remover;
Note: To get the best out of your machine. We
recomend that you periodically run a wash cycle with
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Drum
Do not leave metallic objects such as needles, paper
clips, coins etc. in your machine. These objects lead
to stains in the drum. To clean such rust stains, use a
non-chlorine cleaning agent and follow the instructions
of manufacturers of the cleaning agent. Never use wire
wool or similar hard objects for cleaning rust stains.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
All repairs to the machine must be carried out by an authorised repair agent. When a repair is required or you are
unable to eliminate the failure with the help of the information below:
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
34 Product support
Product support
Help is always at hand
(*) See the section concerning the care and maintenance of your machine.
(**) See the section concerning installation of your machine.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Product support 35
Product support
Help is always at hand
Error Signals
Your machine is equipped with systems which will take the necessary precautions and warn you in case of any.
IMPORTANT: IT CAN TAKE UPTO 10 MINUTES FOR ERROR TO REGISTER.
Wash
Clean the pump filter.If the
Rinse The pump has failed or the pump problem persists and contact the
E03
filter is obstructed. nearest authorised service agent
immediately. (*)
End
(*) See the section regarding the care and maintenance of your machine.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
36 Product support
Product support
Help is always at hand
Technical Specifications
Max working
10 amp 10 amp
current
Maximum wash-
7 kg 7 kg
ing load (dry)
Washing
15 15
programmes
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Product support 37
Product support
Help is always at hand
If you still require further assistance, call one of our experts on 0345 257 7271*. To help give us give you a fast and
efficient service please have the following information ready:
*Calls to Bush enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tariff. Mobile and other
providers costs may vary, see www.bt.com/pricing for details.
For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from
Republic of Ireland will attract international call charges.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
38 Product support
Product support
Help is always at hand
Notes on disposal :
The symbol on the product or its packaging
indicates that this product may not be treated as
household waste. Instead it should be handed
over to the applicable collection point for the
recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling this product, please
contact your local council office, your household
waste disposal service or the shop where the
product was purchased.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Product support 39
Product support
Help is always at hand
Thank you for choosing Bush. Your new product is guaranteed against faults and
breakdowns for 12 months. Don’t forget to register it with us today so we can provide you
with our best possible after-sales service and useful updates.
www.bushregistration.co.uk
FREEPHONE*
Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
40 Product support
Contact:
www.bush-support.com
Helpline: 0345 257 7271 52257834