Introduction and Definition of The Terms

Introduction and Definition of the Terms
Introduction: System
• Thermodynamics: Behaviour of matter
• Matter is anything that occupies space
• The matter which is the subject of a thermodynamic
analysis is called a system.
• The systems to which thermodynamic principles are
applied are usually chemical reaction systems.
• Determination of the effect of environment on the state
of rest (equilibrium state), of a given system
• Environment is generally determined as the pressure
exerted on the system and the temperature of the
system
• Establishment of the relationships between the
equilibrium state of existence of a given system and the
influences which are brought to bear on the system
Concept of state: Micro/Macroscopic
• Microscopic state of the system: If it were possible
to know the masses, velocities, positions, and all
modes of motion of all of the constituent particles
in a system, this knowledge would serve to describe
the microscopic state of the system, which would
determine all of the properties of the system.
• Macroscopic state of the system: Thermodynamics
begins with a consideration of the properties of the
system which, when determined, define the
macroscopic state of the system; i.e., when all of the
properties are fixed then the macroscopic state of the
system is fixed.
Concept of state
• In order to uniquely fix the macroscopic, or
thermodynamic, state of a system, an enormous
amount of information might be required
• However, it is found that when the values of a small
number of properties are fixed then the values of all
of the rest are fixed.
• A given quantity of a substance of fixed composition,
the fixing of the values of any two of the properties
fixes the values of all of the rest.
• Thus only two properties are independent, which,
consequently, are called the independent variables, and
all of the other properties are dependent variables.
• The thermodynamic state of the simple system is thus
uniquely fixed when the values of the two
independent variables are fixed.
Concept of state
Concept of state
Simple Equilibrium
• Fixed quantity of gas
contained in a cylinder by a
movable piston
• The system is at
rest/equilibrium when:
• The pressure exerted by the
gas on the piston equals the
pressure exerted by the
piston on the gas, and
• The temperature of the gas is
the same as the temperature
of the surroundings
Simple Equilibrium
• The state of the gas is fixed-equilibrium occurs as
a result of the establishment of a balance
between the tendency of the external influences
acting on the system
• To cause a change in the system and the tendency
of the system to resist change
• The fixing of the pressure of the gas at P1 and
temperature at T1 determines the state of the
system and hence fixes the volume at the value V1
• Isothermal change in pressure-Effect on Volume
• Isobaric change in Temperature-Effect on Volume
Equation of State of an Ideal Gas
• P-V relationship of a gas at constant T was
determined experimentally in 1660 by Robert
Boyle
• P α 1/V
• V-T relationship of a gas at constant P was
first determined experimentally by Jacques-
Alexandre-Cesar Charles in 1787
• VαT
Equation of State of an Ideal Gas
Coefficient of Thermal Expansion-Notion of
Ideal Gas and Absolute Temperature Scale
• It all started with Celsius scale
• In 1802, Joseph-Luis Gay-Lussac observed
that the thermal coefficient of permanent gases
was a constant
• Gay-Lussac obtained a value of 1/267 for α

• More refined experimentation by Regnault in
1847 showed α to have the value 1/273
Notion of Ideal Gas and Absolute Temperature
Scale
• Later it was found that the accuracy with which Boyle’s
and Charles’ laws describe the behavior of different
gases varies from one gas to another
• Gases with lower boiling points obey the laws more
closely than do gases with higher boiling points
• The laws are more closely obeyed by all gases as the
pressure of the gas is decreased.
• It was thus found convenient to invent a hypothetical
gas which obeys Boyle’s and Charles’ laws exactly at
all temperatures and pressures.
• This hypothetical gas is called the ideal gas, and it has
a value of α of 1/273.15.
Absolute Temperature Scale
• The existence of a finite coefficient of thermal
expansion; that is, as a equals 1/273.15 then the
fractional sets a limit on the thermal contraction
of the ideal gas decrease in the volume of the gas,
per degree decrease in temperature, is 1/273.15 of
the volume at 0°C.
• Thus, at -273.15°C the volume of the gas is zero,
and hence the limit of temperature decrease,-
273.15°C, is the absolute zero of temperature.
• This defines an absolute scale of temperature,
called the ideal gas temperature scale
Extensive and Intensive Properties
• Properties (or state variables) are either
extensive or intensive
• Extensive properties have values which
depend on the size of the system
• The values of intensive properties are
independent of the size of the system
• Volume is an extensive property, and
temperature and pressure are intensive
properties
Extensive and Intensive Properties
• The values of extensive properties, expressed
per unit volume or unit mass of the system,
have the characteristics of intensive variables
• The volume per unit mass (specific volume)
and the volume per mole (the molar volume)
are properties whose values are independent
of the size of the system
Thermodynamic Components
• Components: Chemical Species with fixed

composition
• The simplest components are chemical
elements and stoichiometric compounds
• one-component (unary) systems, two-
component (binary) systems, three-
component (ternary) systems, four-component
(quaternary) systems
Phase
• A phase is defined as being a finite volume in the
physical system with-in which the properties are
uniformly constant-do not experience any
abrupt change in passing from one point in the
volume to another.
• Within any of the one phase areas in the phase
diagram, the system is said to be homogeneous
• System is heterogeneous when it contains two
or more phases, e.g., coexisting ice and liquid
water is a heterogeneous system comprising two
phases
Phase Diagrams
• Graphically represent the equilibrium states
of existence of a system, the constitution or
phase diagram is the most popular and
convenient
Phase diagram for H2O-Example of One
component System
Phase Diagrams with Two Component Systems
• If the system contains two components, a
composition axis must be included and,
consequently, the complete diagram is three-
dimensional with the coordinates
composition, temperature, and pressure
Example of Binary Phase Diagram
Arbitrariness in choosing Components
• 1. The system Fe–O (24 weight % O, 76 weight %
Fe)
• 2. The system FeO–Fe2O3 (77.81 weight % FeO,
22.19 weight % Fe2O3)
• 3. The system FeO–Fe3O4 (67.83 weight % FeO,
32.17 weight % Fe3O4)
• 4. The system Fe–Fe3O4 (13.18 weight % Fe, 86.82
weight % Fe3O4)
• 5. The system Fe–Fe2O3 (20.16 weight % Fe, 79.84
weight % Fe2O3)
• 6. The system FeO–O (97.78 weight % FeO, 2.22
weight % O)
• The actual choice of the two components for
use in a thermodynamic analysis is thus
purely a matter of convenience
• It has a distinct advantage…
• Thermodynamic behaviour of highly
complex systems, such as metallurgical slags
and molten glass, can be completely
described in spite of the fact that the ionic
constitutions of these systems are not
known completely

Introduction and Definition of The Terms

Uploaded by

Copyright:

Available Formats

Introduction and Definition of The Terms

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Introduction and Definition of The Terms

Uploaded by

Copyright:

Available Formats

Introduction and Definition of the Terms

• Gay-Lussac obtained a value of 1/267 for α

• Components: Chemical Species with fixed

You might also like