Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    14002-D TDS PROPreg Updated 11-14-17

    Uploaded by

    abdul bari
    This document provides information about a unidirectional carbon fiber prepreg including its material specifications, physical properties, mechanical properties, shelf life, gel time, glass transition temperature, and processing instructions. The prepreg exhibits excellent strength and stiffness properties and has a shelf life of over 6 months at below 0°F or 1 month at 68°F. Laminates using the prepreg cure for 90 minutes at 275°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    14002-D TDS PROPreg Updated 11-14-17

    Uploaded by

    abdul bari
    16 views1 page
    This document provides information about a unidirectional carbon fiber prepreg including its material specifications, physical properties, mechanical properties, shelf life, gel time, glass transition temperature, and processing instructions. The prepreg exhibits excellent strength and stiffness properties and has a shelf life of over 6 months at below 0°F or 1 month at 68°F. Laminates using the prepreg cure for 90 minutes at 275°F.

    Original Description:

    bike frame material properties

    Original Title

    14002-D_TDS_PROPreg_updated_11-14-17

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a unidirectional carbon fiber prepreg including its material specifications, physical properties, mechanical properties, shelf life, gel time, glass transition temperature, and processing instructions. The prepreg exhibits excellent strength and stiffness properties and has a shelf life of over 6 months at below 0°F or 1 month at 68°F. Laminates using the prepreg cure for 90 minutes at 275°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views1 page

    14002-D TDS PROPreg Updated 11-14-17

    Uploaded by

    abdul bari
    This document provides information about a unidirectional carbon fiber prepreg including its material specifications, physical properties, mechanical properties, shelf life, gel time, glass transition temperature, and processing instructions. The prepreg exhibits excellent strength and stiffness properties and has a shelf life of over 6 months at below 0°F or 1 month at 68°F. Laminates using the prepreg cure for 90 minutes at 275°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    14002-D

    Standard Modulus Unidirectional Prepreg


    Product Description
    Rock West Composites PROPreg™ is a heat activated carbon fiber + epoxy system recommended especially for
    fiber-reinforced composite parts. This prepreg exhibits excellent mechanical strength and stiffness properties.

    Handling, Safety and Storage


    • Gloves and safety glasses are recommended for user’s personal protection.
    • When removing from freezer keep sealed until fully thawed.
    Material Specification (Composite)

    Physical Properties Typical Composite Mechanical Properties


    Fiber T700 SC-12K (0° orientation) @ 23 °C
    Resin 250F Epoxy Tensile Strength (MPa) 2250 ASTM D
    Tensile Modulus (GPa) 127 3039
    6+ months (@ <-18°C / 0°F)
    Shelf Life (°C/°F) Comp. Strength (MPa) 1247 ASTM D
    1 month (@ 20°C / 68°F)
    Comp. Modulus (GPa) 123 3410
    Gel Time @ 135°C / 270°F 3 – 6 minutes
    Flexural Strength (MPa) 1500
    ASTM D 790
    Tg Glass Transition (°C / °F) 130 ± 10 °C / 266 ± 18 °F Flexural Modulus (GPa) 98

    Processing

    • Pressure required for adequate consolidation


    • Heat up (ramp) rate is listed as an acceptable range, in degrees F per minute
    • Laminates cure for 90 min. @ 275 °F or longer at lower temperatures
    NOTE: The information contained above is believed to be reliable and only for the reference without any effective guarantee for the application of the user. The user is responsible to
    determine the suitability for the user’s application and the reliability of the products. Rock West Composites will not accept claim of warranties of the fitness or reliability for a particular
    purpose, especially the liability for consequential damages of end products.

    You might also like