Scribd
Upload
65 views2 pages

CPP 45 B

The document describes the CPP-45 series conductive plastic angle sensors. It has an effective electrical travel of 350 degrees and independent linearity of ±0.3% or ±0.1% for special linearity. It is available with either a Φ4mm or Φ6mm shaft and has aluminum housing, stainless steel shaft and ball bearing. It provides 360 degrees of total mechanical travel and has a life of 10 million cycles.

Uploaded by

Wahyudi andhika com
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views2 pages

CPP 45 B

The document describes the CPP-45 series conductive plastic angle sensors. It has an effective electrical travel of 350 degrees and independent linearity of ±0.3% or ±0.1% for special linearity. It is available with either a Φ4mm or Φ6mm shaft and has aluminum housing, stainless steel shaft and ball bearing. It provides 360 degrees of total mechanical travel and has a life of 10 million cycles.

Uploaded by

Wahyudi andhika com
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1/2

Conductive Plastic Angle Sensor

CPP-45 Series
・ Conductive Plastic Angle Sensor
・ Effective Electrical Travel : 350°
・ Independent Linearity : ±0.3% (Special Linearity : ±0.1%)
・ Servo Mount & Screw Mount

・CPP-45 : Φ4mm Shaft


・CPP-45B : Φ6mm Shaft

【Material】
● Housing : Aluminum
● Shaft : Stainless Steel
● Ball Bearing : Stainless Steel

■ Dimension (mm)

■ Output Characteristics

■ Schematic

■ Mounting

2013/8
2/2

【Model No.】 CPP-45 CPP-45B

<Φ4mm Shaft> <Φ6mm Shaft>


Electrical Specifications

Effective Electrical Travel 350° ＋２°、－3°


Total Resistance 0.5, 1K, 2K, 5K, 10K Ω
Total Resistance Tolerance ±15％
Independent Linearity ±0.3％ (Special Linearity ±0.1%)
Rated Dissipation 3 W/70 ℃
Output Smoothness MAX. 0.1％
Insulation Resistance MIN. 100MΩ/DC1000V
Dielectric Strength AC1000V/ 1 Minute
TC of Resistance ±400 ppm/K

Mechanical Specifications

Total Mechanical Travel 360° endless


Torque 1.8 mN・m MAX. (Additional 1.2mN・m/add one gang)
Thrust Load Tolerance 1N 2N
Radial Load Tolerance 5N 6N
Mass Approx. 60g (Additional 10g/add one gang)

Environmental Specifications

Life Cycles 10 Million Cycle


Category Temperature Range -40 ~ +120 ℃
Storage Temperature Range -40 ~ +120 ℃
Vibration 150m/S2 2000Hz 3axis 2hours each
Shock 500m/S2 11ms 6directions 3times

■ Options

・Multi Ganging : More than 4 sections, please contact us


・Additional Taps : Up to 8 taps
For Output : Type (A) … No shorted angle
For Input : Type (B) … 1~5° shorted on tap
・Additional Center Tap
C.T(A) … No shorted angle
C.T(B) … Shorted on tap (Shorted angle 1~5°)

■ Accessories

Mounting Cleats : 2 pieces

■ Handling Instruction

・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.

2013/8

You might also like