Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    DWDFXAN Full en Us Letter

    Uploaded by

    Partagon Pow
    This document summarizes a 3-way, direct-acting solenoid-operated directional poppet valve. The valve is normally open between port 1 and port 2, and port 3 is blocked. When energized, the valve connects port 2 to 3 and blocks port 1. It has low leakage rates and a response time of 50 ms. The valve is used with FLeX series coils and has a maximum operating pressure of 5000 psi.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DWDFXAN Full en Us Letter

    Uploaded by

    Partagon Pow
    28 views3 pages
    This document summarizes a 3-way, direct-acting solenoid-operated directional poppet valve. The valve is normally open between port 1 and port 2, and port 3 is blocked. When energized, the valve connects port 2 to 3 and blocks port 1. It has low leakage rates and a response time of 50 ms. The valve is used with FLeX series coils and has a maximum operating pressure of 5000 psi.

    Original Title

    DWDFXAN_full_en_us_letter

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes a 3-way, direct-acting solenoid-operated directional poppet valve. The valve is normally open between port 1 and port 2, and port 3 is blocked. When energized, the valve connects port 2 to 3 and blocks port 1. It has low leakage rates and a response time of 50 ms. The valve is used with FLeX series coils and has a maximum operating pressure of 5000 psi.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views3 pages

    DWDFXAN Full en Us Letter

    Uploaded by

    Partagon Pow
    This document summarizes a 3-way, direct-acting solenoid-operated directional poppet valve. The valve is normally open between port 1 and port 2, and port 3 is blocked. When energized, the valve connects port 2 to 3 and blocks port 1. It has low leakage rates and a response time of 50 ms. The valve is used with FLeX series coils and has a maximum operating pressure of 5000 psi.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    MODEL 3-way, direct-acting, solenoid-operated directional poppet valve

    DWDF SERIES 1 / CAPACITY: 7.5 gpm / CAVITY: T-11A

    sunhydraulics.com/model/DWDF

    X-Control

    CONFIGURATION
    This solenoid-operated 3-way, 2-position cartridge is a direct-acting, poppet-style directional valve. The valve is
    normally open between port 1 and port 2 with port 3 blocked. Energizing the valve connects port 2 to 3 and blocks
    X Control No Manual Override
    port 1. All flow paths are bidirectional and blocked paths are blocked in both directions. Due to the poppet style
    A Poppet Normally Open 1 to 2, Closed construction, this valve has extremely low leakage.
    Configuration 2 to 3
    N Seal Material Buna-N This valve is designed to be used with FLeX Series coils.
    (none) Coil No coil
    TECHNICAL DATA NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

    Cavity T-11A
    Series 1
    Capacity 7.5 gpm
    Maximum Operating Pressure 5000 psi
    Maximum Valve Leakage at 110 SUS (24 cSt) 10 drops/min.@5000 psi
    Manual Override Force Requirement 5 lbs/1000 psi @ Port 1
    Manual Override Stroke .10 in.
    Response Time - Typical 50 ms
    Switching Frequency 15,000 max. cycles/hr
    Solenoid Tube Diameter .63 in.
    Valve Hex Size 7/8 in.
    Valve Installation Torque 30 - 35 lbf ft
    Seal kit - Cartridge Buna: 990411007
    Seal kit - Cartridge Viton: 990411006
    Model Weight 0.62 lb.

    NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.
    An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

    CONFIGURATION OPTIONS Model Code Example: DWDFXAN


    CONTROL (X) POPPET CONFIGURATION (A) SEAL MATERIAL (N) COIL *
    X No Manual Override A Normally Open 1 to 2, Closed 2 to 3 N Buna-N No coil
    D Twist/Lock (Dual) Manual Override V Viton * Additional coil options are available
    L Twist/Lock (Detent) Manual Override
    M Manual Override
    T Twist (Momentary) Manual Override

    c 2019 Sun Hydraulics


    1 of 3
    TECHNICAL FEATURES
    The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
    This valve is direct actuated and requires no minimum hydraulic pressure for operation.
    This cartridge has an option for manual override. See the CONFIGURATION section.
    This valve is suitable for load holding applications on port 3 only. In the event of power failure, the valve would spring closed.
    On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control
    assemblies have a mechanical life expectancy of approximately 7,000 cycles.
    All configurations of this valve include zinc-nickel plating as standard for 1000-hour salt fog protection.
    Coil connector options offer ratings up to IP69K. See individual coil product pages for details.
    This cartridge utilizes both 740 Series high-power and 747 Series hazardous location coils.
    Valves exhibit extremely low leakage rates; less than 10 drops/min. @ 5000 psi (0,7 cc/min @ 350 bar).
    A FULL DATA SHEET is available for this model using the link at the top of the page.
    This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a
    factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes
    that will affect the function of the cartridge.
    A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
    The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
    Coils can be mounted on the tube in either direction.
    Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge
    machining variations.

    PERFORMANCE CURVES

    c 2019 Sun Hydraulics


    2 of 3
    c 2019 Sun Hydraulics
    3 of 3

    You might also like