Open Elective For 8th Semester

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Environmental Science Code: D000801(094)
40 Total Tutorial Ten (Minimum)
Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 Be familiar with the reason of water pollution.
 Familiar with the causes of air pollution
 To learn various method of controlling pollution.
Environmental Pollution
UNIT–I Definition, cause, effects and control measures of, Air pollution, Water pollution, Soil pollution,
Marine pollution, Noise pollution, Thermal pollution, Nuclear hazards.
Ecosystems
Concept, Structure, function, Producers, consumers, decomposers, Energy flow, ecological
UNIT–II succession, food chains, food webs, ecological pyramids. Introduction, types, characteristic
features, structure and function of the forest, grassland, desert and aquatic ecosystems (ponds,
streams, lakes, rivers, oceans, estuaries).
Biodiversity and its conservation
UNIT–III Introduction, definition, genetic, species & ecosystem diversity and bio-geographical classification
of India.
Land resources
Land as a resource, land degradation, man induced landslides, soil erosion and desertification. Role
UNIT–IV
of an individual in conservation of natural resources. Equitable use of resources for sustainable
lifestyles.
Environmental ethics
Issues and possible solutions, climate change, global warming, acid rain, ozone layer depletion,
UNIT–V nuclear accidents and holocaust dies. Wasteland reclamation. Consumerism and waste products.
Environment Protection Act. Air (Prevention and Control of Pollution) Act. Water (Prevention and
control of Pollution) Act. Wildlife Protection Act. Forest Conservation Act.
Text books:
1. Visit to a local area to document environmental assets river/forest/grassland/hill/mountain.
2. Visit to a local polluted site-Urban/ Rural/ Industrial/ Agricultural, study of common plants, insects,
birds and study of simple ecosystems-pond, river, hill slopes, etc.
Reference Books:
1. Expected impact of climate change on agricultural production and water resources.
2. Mitigation Strategies and Economics of climate change.
Course Outcome:
Student should be able to
 To be able to plan and handle issues related to environment.
 To be able to identify the reason of climate change.
 Explain about different types of environmental pollution.
 Explain and apply various methods of controlling environmental pollution
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Industrial Engineering & Management Code: D000802(076)
40 Total Tutorial Ten (Minimum)
Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35

Introduction
History & development, objective, place of Industrial Engineering in an organization, relation
with other department, system approach
Plant Location
UNIT–I
Need for a suitable location, Plant location problems factors affecting location, quantitative
method for evaluation of plant location.
Plant Layout
Objective & Principles, factors affecting layout, types of layout.
Work Study
Purpose, objectives and applications of work study, Productivity and work study.
Method Study
Introduction, procedure, flow process charts, Multiple activity chart, motion economy principles,
UNIT–II
Therbligs, cycle graph and chronocycle graph.
Work Measurement
Definition, types, Time Study- selection & timing the job, rating, allowances, Numerical on
Normal and standard time calculation.
Job Evaluation and Merit Rating
Definition, objectives, methods.
Wages and Incentives
UNIT–III
Terminology, characteristics, factors, types of incentives, wage incentive plan, Rowan plan,
Taylor’s differential piece rate system, Emerson’s efficiency plan, Halsey’s 50-50 plan, Bedaux
plan, Group task & Bonus system.
Basic concepts and Functions of management
Nature, Purpose and Objectives of basic functions of management, Authority and Responsibility,
social responsibility of manager, ethics and management.
Human Resource Management
UNIT–IV
Nature and Scope of Human Resource Planning, Recruitment and Selection, Training and
Development, Career Growth, Grievances, Motivation – needs and types, Maslow hierarchy of
needs theory, Herzberg two factor theory, Need-want- satisfaction chain, Quality of working life,
job enrichment and job enlargement.
Marketing Management
Marketing Environment, Marketing Mix, Advertising and Sales Promotion, Channels of
Distribution.
UNIT–V
Financial Management
Book keeping, financial statement Analysis, Financial Ratios, Capital Budgeting, Break-Even
Analysis.
Text books:
1. Industrial Engineering and Production Management -MartandTelsang - S.Chand.
2. Industrial Engineering & Management - S. Dalele&Mansoor Ali - Standard Publishers
Reference Books:
1. Industrial Engineering &Management ,A new perspective- Philip E Hicks - Mcgraw Hill
2. Company Essential of Management - H. Koonz and H. Weihrich – Mcgraw Hill
3. Marketing Management- Kotler Philip- Prentice Hall of India
4. Flexibilty in Management - Sushil, Vikas publication - New Delhi
5. Human Resource Management - Luthans Fred - McGraw Hill, Inc.
6. Financial Management - M.Y. Khan and P.K. Jain - Tata Mc-Graw Hill
7. Fundamentals of Business Organizations and Management -Y.K. Bhusan - S. Chand
8. Industrial Management - K.K. Ahuja - Khanna Publishers
9. Introduction of work study - ILO, Geneva - Universal Publishing Corporation, Bombay
10. Motion and Time Study - Ralph M. Bannes - John Wiley & Sons
11. Work Study and Ergonomics - H.S. Shan – DhanpatRai & Sons
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Soft Computing Techniques Code: D000803(022)
40 Total Tutorial Ten (Minimum)
Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
The main objective of the course is to familiarize students with the underlying principle of soft computing with its
usage in various applications to solve real life problems.
Introduction: Introduction to soft computing; introduction to biological and artificial neural
UNIT– I
network, introduction to fuzzy sets and fuzzy logic systems.
Artificial Neural Networks and Applications: Different artificial neural network models,
UNIT– II
learning in artificial neural networks, neural network applications in control systems.
Fuzzy Systems and Applications: Fuzzy sets; fuzzy reasoning, fuzzy inference systems, fuzzy
UNIT– III
control, fuzzy clustering, applications of fuzzy systems.
Neuro-Fuzzy Systems: Neuro-fuzzy modeling, Neuro-fuzzy control. Genetic Algorithms- Simple
UNIT– IV
GA, crossover and mutation, genetic algorithms in search and optimization.
Applications: Pattern Recognitions, Image Processing, Biological Sequence Alignment and Drug
UNIT– V Design, Robotics and Sensors, Information Retrieval Systems, Share Market Analysis, Analysis
language processing.
Text books:
1. Fuzzy Logic And Soft Computing – Chen, Guoging, Ving, Mingsheng & Cai, Kai Yuan Ed – Kluwar
Academic
2. Soft Computing and Intelligent Systems Design Theory Tools and Applications – Karray F O & Desilva C
-Pearson, New Delhi
Reference Books:
1. A Computational intelligence: principles, techniques, and applications - Konar - Springer.
2. Introduction to pattern recognition: statistical, structural, neural, and fuzzy logic approaches: Friedman, M &
Kandel, A. - World Scientific.
3. Neuro-fuzzy and soft computing: a computational approach to learning and machine intelligence - Jang, J S
R, Sun, C T, & Mizutani E - Prentice Hall.
4. An introduction to genetic algorithms- Mitchell M - MIT press.
5. Fuzzy Logic with Engineering Applications - Ross T J - John Wiley & Sons
Course Outcomes:
On successful completion of the course, the student will be able to:
1. Identify and describe soft computing techniques and their roles in building intelligent machines.
2. Describe Artificial Neural Networks and Applications.
3. Describe Fuzzy Systems and Applications.
4. Describe Neuro-Fuzzy Systems and Applications.
5. Discuss applications of soft computing to solve real life problems
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Composite Materials Code: D000804(037)
40 Total Tutorial Ten (Minimum)
Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 To be familiar with classification & characteristics of composite material and their application.
 To gain the knowledge about manufacturing methods, testing and environmental issue related with
composite material.
 To train students to be able to design composite structures, select composite materials, conduct stress
analyses of selected practical applications using laminated plate theories appropriate strength criteria.
 To be familiar with the properties and response of composite structures subjected to mechanical loading
under static and cyclic conditions.

Introduction to Composites: Definition, classification and characteristics of composite materials.

Basic composite constituents – fiber and matrix; Properties of unidirectional long fiber and short
UNIT– I
fiber composites; Polymeric materials and polymeric composites; Honeycomb and Sandwich
Composite Structure; Application areas of composites.
Manufacturing, Testing and Environmental Issues: Moulding, pultrusion, filament winding,
other advanced manufacturing techniques; Quality inspection and testing – uniaxial tension test,
UNIT– II
uniaxial compression test, shear test, fracture toughness testing of composites. Environmental
Issues related with composite manufacturing and their applications.
Material Properties: Orthotropic and Anisotropic materials; properties relating stress to strain,
properties relating temperature to strain, properties relating moisture to strain, properties relating
UNIT– III
stress (or strain) to failure, Failure Criterion – Maximum Stress and Maximum Strain; Review of
force tensors, stress tensors, strain tensors
Elastic Response Analysis: Hooke’s law for orthotropic and anisotropic materials; Linear

UNIT– IV Elasticity for Anisotropic Materials; Unidirectional composite laminates; Rotations of Stresses,
Strains; Residual Stresses; Stress and environmental effects on composites behaviour.
Composite Laminates: Thin-plate theory, classical lamination theory; Angle-ply and cross ply

UNIT– V laminates; Static,dynamic and stability analysis for simple cases of composite plates; Interlaminar
stress behaviour; Composite Joints; Design with Composites.
Text books:
1. “Analysis and Performance of Fiber Composites”- Agarwal, B. D., and Broutman L. J.- John Wiley
andSons, New York.
2. “Fiber Reinforced Composites: Materials, Manufacturing and Design” - Mallick, P.K. Marcel Dekker Inc.
Reference Books:
1. “Mechanics of Composite Materials and Structures”- Mukhopadhyay M, University Press, India.
2. “Primer on Composite Materials, Analysis” Halpin, J. C., Techomic Publishing Co.
3. “Composite Materials Technology: Processes and Properties”- Mallick, P. K. and Newman, S.,
HansenPublisher, Munish.
4. “Stress Analysis of Fiber – Reinforced Composite Materials”- Hyer, M. W. - McGraw-Hill, New
York.
5. “Engineering Mechanics of Composite Materials”, Issac M. Daniel and Ori Ishai - Oxford
UniversityPress-2006, First Indian Edition – 2007.
Course Outcomes:
On successful completion of the course, the student will be able to:
 Acquire knowledge and hands-on competence in applying the knowledge of composite materials in
thedesign and
 development of mechanical systems.
 Demonstrate creativeness in designing new systems components in the field of engineering.
 Work effectively with engineering and science teams as well as with multidisciplinary designs.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Industrial Automation Code: D000805(025)
40 Total Tutorial Ten (Minimum)
Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 To develop and apply Mathematical and Engineering skills to identify, formulate and solve industrial
process problems.
 This subject seeks to close the gap between Instrumentation and Mechanical Engineering.
 This subject provides the knowledge of different types of controller & their applications.
 This subject provides the basic knowledge of PLC and DCS.

Introduction to Process Control : Process Control Block Diagram ,Control System Evaluation,
Digital Control , Supervisory Control ,Direct Digital Control, Networked Control Systems,
UNIT–I
Distributed Digital Control, Smart Sensor, Definitions of the terms used to describe Process
Control .Data Acquisition Systems :DAS Hardware ,DAS Software, Data Logger.
Controller Principles: Process Characteristics ,Process Equation, Process Load, Process Lag,
Self- Regulation, Control System Parameters: Error, Variable Range, Control Parameter Range,
Control Lag, Dead Time, Cycling, Controller Modes: Discontinuous Controller Mode, Two
UNIT–II
Position Mode, Multi Position Mode, Floating Control Mode, Continuous Control Mode
,Proportional Control Mode, Integral Control Mode, Derivative Control Mode, Composite Control
Modes: PI Control, PD Control, PID Control
Analog Controllers: Introduction, Electronic Controllers: Error Detector, Single Controller

UNIT–III Modes, Composite Controller Modes, Pneumatic Controllers: General features, Mode
Implementation.
Programmable Logic Controller: PLC Architecture, Basic Structure, PLC Programming: Ladder
Diagram, Ladder Diagram symbols, Ladder Diagram circuits, PLC Communications and
UNIT–IV
Networking, PLC Selection ,I/O Quantity and Type , I/O Remoting requirements, Memory size and
type, Programmer UNIT–s, PLC Installation, Advantages of using PLCs.
Distributed Control System: Introduction, Overview of Distributed Control Systems, DCS

UNIT–V Software configuration, DCS Communication, DCS Supervisory Computer Tasks, DCS Integration
with PLC and Computers, Features of DCS, Advantages of DCS.
Text books:
1. Process Control Instrumentation Technology by C.D. Johnson ,PHI
2. Computer Aided Process Control by S.K.Singh ,PHI
Reference Books:
 1. Introduction to Instrumentation & Control by A.K.Ghosh, Eastern Economy Edition
2. Intelligent Instrumentation, by George C.Barney, Prentice Hall India
Course Outcomes:
On successful completion of the course, the student will be able to:
 Understand process variables, degrees of freedom, and Self regulation, first &second order Process
System.
 Know the importance of on-off, proportional, integral and derivative modes, composite control
modes- PI, PD and PID controllers.
 Understand ,Communication in DCS, DCS system integration with PLC and computers, Data
loggers, Data Acquisition systems
 (DAS), computer control hierarchy levels and Direct Digital control(DDC).
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Production & Product Management Code: D000806(037)
40 Total Tutorial Ten (Minimum)
Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 To introduce the concept of Organization , Production systems and Cost analysis
 To give knowledge about the Sales Forecasting Methods
 To understand Production Planning and Control and Material Handling
 To study about Materials Management and Quality Control
Production Management
Definition, objectives, scope, benefits, functions of production management, place of production

UNIT–I management in an organization, types of production system, Product life cycle, product design and
development, production cycle. Costing and Cost Analysis Elements of costs, Break even analysis,
Incremental costs, make or buy decision.
Sales Forecasting Purposes, methods – Delphi, linear regression, economic indicators, time-
UNIT–II
series analysis, adjustment for seasonal variations, moving average, exponential smoothing.
Production Planning and Control Functions, Organization, Master Scheduling, Aggregate planning
and strategies , Materials requirement planning, product structure tree, Routing, Loading
Scheduling – forward and backward, Dispatching – priority rules, Sequencing, Johnson’s algorithm
UNIT–III
for n jobs and two machines, Gantt’s chart, Bar chart, Flow process chart. Materials Handling
Principles of materials handling, unit load, Types of materials handling equipment, Relation
between materials handling and plant layout.
Material Management Objectives and functions of materials management, Organization of
materials management. Procurement Objectives of purchase deptt. purchase responsibilities and
organization, types of purchasing, purchase procedures, Import and Export. Stores Keeping Stores
management, functions of stores, classification of materials, standardization of materials,

UNIT–IV identification and maintenance of layout of stores, physical control of materials, pricing of stores,
issuing of stores.
Inventory Control Objective, scope and functions of inventory control, inventory control
techniques, economic ordering quantity, periodic ordering quantity, A.B.C. analysis, General idea
regarding inventory control under risk and uncertainty.
Quality Control

UNIT–V Difference between inspection and quality control, acceptance sampling, procedure’s risk and
consumer’s risk, operating characteristic curve for single sampling plan, AOQL
 Quality of conformance, quality of design, economics of quality, SQC charts for variables and
attributes. Introduction to JIT manufacturing, Kanban system.
Text books:
1. Production and operation Management – By P. Ramamurty – New Age International Pub., 2005
2. Production and operation Management – By R. Mayer – TMH
3. Quality Planning and Analysis, Juran and Gryna
Reference Books:
1. Industrial Engineering & Production Management – Martand Telsang – S. Chand & Co., 2004
2. Production and operations Management by – Adam and Ebert – PHI – 6th Edn., 2003
3. Production planning and Control – By Samuel Eilon, Navneet Prakashan Ltd., Bombay
Course Outcomes:
On successful completion of the course, the student will be able to:
 The students will know about the Organization , Production systems and Cost analysis
 The students will know about the methods of making sales forecasting
 They students will understand the methods of material handling and materials management
 The students will be able to appreciate the methods of Quality Control
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Virtual Instrumentation Code: D000807(028)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 To review background information required for studying virtual instrumentation.
 To study the basic building blocks of virtual instrumentation.
 To study the various techniques of interfacing of external instruments of PC.
 To study the various graphical programming environment in virtual instrumentation.
 To study a few applications in virtual instrumentation.
REVIEW OF DIGITAL INSTRUMENTATION

UNIT–I Representation of analog signals in the digital domain – Review of quantization in amplitude and
time axes, sample and hold, sampling theorem, ADC and DAC.
FUNDAMENTALS OF VIRTUAL INSTRUMENTATION
Concept of virtual instrumentation – PC based data acquisition – Typical on board DAQ card –

UNIT–II Resolution and sampling frequency Multiplexing of analog inputs – Single-ended and differential
inputs – Different strategies for sampling of multi-channel analog inputs. Concept of universal
DAQ card - Use of timer-counter and analog outputs on the universal DAQ card.
CLUSTER OF INSTRUMENTS IN VI SYSTEM
Interfacing of external instruments to a PC – RS232, RS 422, RS 485 and USB standards - IEEE
UNIT–III
488 standard – ISO-OSI model for serial bus – Introduction to bus protocols of MOD bus and
CAN bus.
GRAPHICAL PROGRAMMING ENVIRONMENT IN VI
Concepts of graphical programming – Lab-view software – Concept of VIs and sub VI - Display
UNIT–IV
types – Digital – Analog – Chart – Oscilloscopic types – Loops – Case and sequence structures -
Types of data – Arrays – Formulae nodes –Local and global variables – String and file I/O.
ANALYSIS TOOLS AND SIMPLE APPLICATIONS IN VI
Fourier transform - Power spectrum - Correlation – Windowing and filtering tools – Simple
UNIT–V
temperature indicator – ON/OFF controller – P-I-D controller - CRO emulation - Simulation
of a simple second order system – Generation of HTML page.
Text books:
1. PC Interfacing for Data Acquisition and Process Control, S. Gupta and J.P Gupta, Instrument
Society ofAmerica, 1994.
2. Understanding Serial Communications, Peter W. Gofton, Sybex International.
3. Learning with Lab-view, Robert H. Bishop, Prentice Hall, 2003.
Reference Books:
1. PC Interfacing and Data Acquisition: Techniques for Measurement, Instrumentation and Control Kevin
James,Newness, 2000.
2. Lab-view Graphical Programming, Gary W. Johnson, Richard Jennings, McGraw Hill Professional
Publishing,2001.
Note: To offer this elective, multi-user licensed copy of Lab-view software should be available.
Course Outcomes:
On successful completion of the course, the student will be able to:
 The students will come to know importance of VI in present scenario.
 They will also come to know about application of mathematical tools in Virtual Instrumentation
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Data Sciences Code: D000808(022)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 The objective of this course is to impart necessary knowledge of the mathematical foundations needed
for data science and develop programming skills required to build data science applications.

Introduction to Data Science: Concept of Data Science, Traits of Big data, Web Scraping,
UNIT–I
Analysis vs Reporting.
Introduction to Programming Tools for Data Science:
Tool kits using Python: Matplotlib, NumPy, Scikit-learn, NLTK Visualizing Data: Bar Charts, Line

UNIT–II Charts, Scatter plots

Working with data: Reading Files, Scraping the Web, Using APIs (Example: Using the Twitter
APIs), Cleaning and Munging, Manipulating Data, Rescaling, Dimensionality Reduction.
Mathematical Foundations 1.4 Linear Algebra: Vectors, Matrices. Statistics: Describing a Single Set
of Data, Correlation, Simpson’s Paradox, Correlation and Causation. Probability: Dependence and

UNIT–III Independence, Conditional Probability, Bayes’s Theorem, Random Variables, Continuous

Distributions, The Normal Distribution, The Central Limit Theorem. Hypothesis and Inference:
Statistical Hypothesis Testing, Confidence Intervals, Phacking, Bayesian Inference.
Machine Learning Overview of Machine learning concepts – Over fitting and train/test splits,
Types of Machine learning Supervised, Unsupervised, Reinforced learning, Introduction to Bayes
Theorem, Linear Regression- model assumptions, regularization (lasso, ridge, elastic net),

UNIT–IV Classification and Regression algorithms- Naïve Bayes, K- Nearest Neighbors, logistic regression,
support vector machines (SVM), decision trees, and random forest, Classification Errors, Analysis of
Time Series- Linear Systems Analysis, Nonlinear Dynamics, Rule Induction, Neural Networks
Learning And Generalization, Overview of Deep Learning.
Case Studies of Data Science Application Weather forecasting, Stock market prediction,
UNIT–V
Object recognition, Real Time Sentiment Analysis.
Text Books/References:
1. Joel Grus, "Data Science from Scratch: First Principles w
2. Aurélien Géron, "Hands-On Machine Learning with ScikConcepts, Tools, and Techniques to
Build Intelligent SyMedia
3. Jain V.K., “Data Sciences”, Khanna Publishing House, Del
4. Jain V.K., “Big Data and Hadoop”, Khanna Publishing Ho
5. Jeeva Jose, “Machine Learning”, Khanna Publishing Hous
6. Chopra Rajiv, “Machine Learning”, Khanna Publishing H
7. Ian Goodfellow, Yoshua Bengio and Aaron Courville, http://www.deeplearningbook.org
8. Jiawei Han and Jian Pei, "Data Mining Concepts and Techgan Kaufmann Publishers.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Computational Fluid Dynamics Code: D000809(037)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 To introduce the student to widely used techniques in the numerical solution of fluid equations, issues
thatarise in the solution of such equations, and modern trends in CFD.
 To acquire core knowledge of the fundamentals of CFD for engineers, and an introduction to the
methodsand analysis techniques used in CFD.
 By studying a variety of flow situations students will develop a better intuition of fluid mechanics
morequickly than is possible with traditional analytical approaches.
 Quantify and analyze the numerical error in CFD discetization schemes.
 Develop finite difference and finite volume forms of the CFD equations and important model systems
 Formulate explicit and implicit algorithms for solving the Navier-Stokes equations..
 Understand and apply verification strategies for evaluating CFD code.
Fundamental Concepts Introduction- Governing Equations of Fluid Dynamics. Mathematical

UNIT–I Behavior of Partial Differential Equations - Elliptic, Parabolic and Hyperbolic equations. Physical
Classification of fluid dynamics problems, Well-posed problems.
Finite Element and Finite Difference Method Overview of Finite Element and Finite difference

UNIT–II Techniques in Computational Fluid Dynamics. Strong and Weak Formulations of a Boundary
Value Problem.
Finite Volume Schemes General Discretisation Methodologies: Cell Centered Formulation- Lax-
Vendor off Time Stepping, Runge-Kutta Time Stepping, Multistage Time Stepping. Cell Vertex
UNIT–III
Formulation - Multistage Time Stepping. Discretisation of convective fluxes: Flux-vector splitting
formulation, Flux-difference splitting formulation. Up-wind formulation.
Discretization Boundary layer Equations and methods of solution -Implicit time dependent
methods for

UNIT–IV inviscid and viscous compressible flows - Concept of numerical dissipation –Stability properties of
explicit and implicit methods - Conservative up-wind discretization for Hyperbolic systems - Further
advantages of upwind differencing.
Principles of Grid Generation Structured grid: C-, H- and O-Grid topology. Algebraic, Elliptical
and Hyperbolic Grid Generation, Unstructured grid: Delaunay Triangulation, Advancing-Front
UNIT–V
Method, Generation of Anisotropic Grids, Mixed-Element/Hybrid Grids, Assessment and
Improvement of Grid Quality.
Text Books:
1. Introduction to computational fluid dynamics: the finite volume method - Versteeg, & Malalasekera
- Addison- Wesley.

2. Introduction to Computational Fluid Dynamics – Niyog & Chakraborty – Pearson ,Singapore

Reference Books:
1. Computational Techniques for Fluid Dynamics, - Vols. I and II - Fletcher C.A.J. – Springer, Verlag,
Berlin,1988.
2. Computational Fluid Dynamics: An Introduction - John F. Wendt (Editor) – Springer, Verlag, Berlin.
3. Numerical Computation of Internal and External Flows, Vols. I and II - Charles Hirsch - John Wiley &
Sons,New York.
4. Computational Fluid Dynamics for Engineers, Vols. I & II - . Klaus A Hoffmann and Steve T. Chiang -
Engineering Education System, W. Wichita, K.S., 67208 – 1078 USA.
5. Fundamentals of Aerodynamics - Anderson, Jr.D - McGraw Hill.
Course Outcomes:
On successful completion of the course, the student will be able to:
 Develop an understanding for the major theories, approaches and methodologies used in CFD.
 Build up the skills in the actual implementation of CFD methods for mechanical engineering design,
analysis and application.
 Work effectively with engineering and science teams as well as with multidisciplinary designs.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Medical Biotechnology Code: D000810(018)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 To make the students understand about human genetics, disorders and diseases associated.
 To understand the factors involves in diseases.
 To familiarize the students with diagnostic techniques used in medicine.
 To learn about the identification and treatment of diseases.
 To make the students aware with ethical issues associated with techniques in human genetics.
Introduction
 Introduction: Human genetics (types of diseases: Chromosomal disorders, Numerical
disorders e.g. trisomies & monosomies.
UNIT–I  Structural disorders e.g. deletions, duplications, translocations & inversions, chromosomal
instability syndromes;
 Gene controlled diseases: Autosomal and X-linked disorders, mitochondrial disorders),
inheritance pattern, general study of causes of genetic disorders.
Diseases and their causes
 Genetic diseases: Huntington’s Disease, Myotonic muscular dystrophy, sickle cell anaemia,
cystic fibrosis, Duchenne muscular dystrophy, hemophilia, phenylketoneurea, Familial
Hypercholesterolemia, Congenital hypothyroidism, Tay-Sachs, Alzheimer, Parkinsonism,
UNIT–II
Mongolism, Cri-du-chat, Edwards syndrome, Turner’s syndrome, klinefelter’s syndrome,
down’s syndrome, cleft palate.
 Cancer and oncogenes: Types of Cancer, properties of cancer, genetic basis of cancer.
 Oncogenes: Tumor suppressor genes function and mechanism of action of pRB and p53.
Diagnosis
 Gene testing (prenatal, new born screening, carrier detection screening, predictive and
presymptomatic testing, forensic testing)
 Immunodiagnostics for pregnancy: Diagnosis using protein and enzyme markers,
UNIT–III monoclonal antibodies.
 Invasive techniques: Amniocentesis, Chorionic Villi Sampling (CVS).
 Non-invasive techniques : ultrasonography, X-ray, maternal serum and fetal cells in maternal
blood, microarray technology- genomic and c - DNA arrays, probe, biosensors, FISH
cytogenetics.
Therapy
 Therapy: Gene Knockouts /silencing, gene disruption-p53, immunological (MAb, vaccines).
UNIT–IV
 Gene therapy for non inheritable diseases: somatic cell gene therapy and germ line gene
therapy; Stem cell therapy; Radiotherapy; Chemotherapy; Enzyme therapy.
Ethical issues
 Ethical issues in medicine: In vitro fertilization, surrogate therapy; Prenatal sex
UNIT–V determination.
 Genetic counseling; Germline gene therapy.
 IPR, patenting; Human transgene.
Text Books:
1. Medical Biotechnology, Albert Sasson (2006), United Nations Publications.
2. Medical Biotechnology, S. N. Jognand (2000), Himalaya Publication.
3. Human Molecular Genetics 3rd Edition Tom Strachan and A.P.Read, Garland science publications.

Reference Books:
1. Biotechnology and Biopharmaceuticals (2003), Rodney J.Y. Ho and milo Gilbaldi, Wiley John & sons.
2. Biotechnology Demystified Sharon Walker (2006) Mc Graw Hill Publication.
The Cell, Geoffrey MCooper and Robert E. Hausman
Course Outcomes:
After completion of course, student should be able to

 The students will gain knowledge of human genetics and molecular mechanisms of the diseases.
 They can apply the concepts in research related works.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Bioterrorism and National Security Code: D000811(018)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 Familiarization of issues involved and threats facing society due to bioterrorism and approaches to tackle
it effectively.
 To know the relationship of microbes and immune system.
 To gain the knowledge of bioweapons and bioterrorism.
 To learn the method used in prevention and control of bioterrorism.
 To understand the ethical issues involved in bioterrorism management.
Terrorism and Bioterrorism
 Definition-Traditional Terrorists-New Terrorists-Nuclear, chemical, and radiological
UNIT–I
weapons.
 The psychology of Bioterrorism-Historical perspective.
Microbes and Immune System
UNIT–II  Primary classes of Microbes-bacteria, virus, and other Agents-Immune system.
 Interaction between microbes and the immune system.
Bioterrorism Weapons and Techniques
 Characteristics of microbes and the reasons for their Use-Symptoms
UNIT–III  Pathogenicity-Epidemiology-natural and targeted release.
 The biological, techniques of dispersal, and case studies of Anthrax, Plague-Botulism,
Smallpox, and Tularemia and VHF.
Prevention and Control of Bioterrorism
 Surveillance and detection, Detection equipment and sensors,
 Diagnosis, Treatment, Vaccinations-Supplies, Effectiveness, Liability, Public Resistance-
UNIT–IV
Response, First Responders.
 Infectious Control, Hospital Prevention, Protection, Decontamination.
 Notification-Role of Law Enforcement-Economic impact.
Bioterrorism Management
 Ethical issues: personal, national, the need to inform the public without creating fear,
UNIT–V
 Cost benefit, Rations, Information Management, Government control and industry Support-
Microbial forensics.
Text Books:
1. Bioterrorism: Guidelines for Medical and Public Health Management, Henderson, Donald, American
Medical Association, 1st Edition, 2002.
2. Biological Weapons: Limiting the Threat (BCSIA Studies in International Security), Lederberg, Joshua
(Editor), MIT Press ,1999.
3. Bioterrorism and Infectious Agents: A New Dilemma for the 21st Century (Emerging Infectious Diseases
of the 21st Century), I.W. Fong and Kenneth Alibek, Springer, 2005.
Reference Books:
1. The Demon in the Freezer: A True Story, Preston, Richard, Fawcett Books, 2003.
2. The Anthrax Letters: A Medical Detective Story, Cole, Leonard A., Joseph Henry Press, 2003.
3. Biotechnology research in an age of terrorism: confronting the dual use dilemma, National Academies of
Science, 2003.
Course Outcomes:
After completion of course, student should be able to

 Exposure to threats for national security.

 Learn methods to tackle them and support law enforcement & health agencies to handle them.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Precision Medicine & Wellness Code: D000812(018)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 To understand the principle of genomics and proteomics
 The course will teach the students about use of modern omics techniques and systems biology in
providing personalized medicine and preventive health care.
 To know about the screening methods of Genetics
 To know the importance of pharmacogenomics in drug testing
 To learn about the ethical issues involved in pharmacogenomics..
Genomics and Proteomics
UNIT–I  Use of genomics, transcriptomics.
 Proteomics and metabolomics in understanding disease condition
Genomics and Proteomics
 Biomarker identification and validation of a disease state. Human Genome project. Cancer
UNIT–II
genome project.
 Different types of genetic and nongenetic variations.
Genetic screening
UNIT–III  Genetic screening and diagnosis: prenatal carrier testing.
 Newborn screening for Mendelian diseases.
Pharmacogenomic
 Pharmacogenomic testing for drug selection, dosing and predicting adverse effects of
UNIT–IV commonly prescribed drugs.
 Tumor profiling, Patient data and clinical decisions.
 Risk assessment through omics approach.
Ethical and Legal Policy
 Ethical, legal, and social implications of health privacy and policy laws for precision
UNIT–V
medicine.
 Ayurveda system of Prakriti and Agni.
Text Books:
1. National Institute of General Medical Sciences. The New Genetics. Bethesda, MD: U.S. Department of
Health and Human Services.
2. Genomic and Precision Medicine, Geoffrey Ginsburg and Huntington Willard,
Reference Books:
1. The Language of Life: DNA and the Revolution in Personalized Medicine, Francis S. Collins.
Course Outcome:
After completion of course, student should be able to
 The students will be introduced to precision medicare and preventive care system using modern omics
tools.
 They will be exposed to recent advances in disease risk prediction, molecular diagnosis and progression of
diseases, and targeted therapies for individuals.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Non Conventional Energy Sources Code: D000813(019)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives:
 Explicatory concepts on non conventional energy sources and environmental aspects of power generation.
 Comprehensive knowledge about Solar Energy and its application of the kinetics of enzyme and
immobilization of enzymes.
 Demonstrative understandings on Biomass, Biodigestion, Biogas, Biodiesel, Wind Energy, Tidal Energy
and Wave Energy.
 Illustrative capability and critical thinking on various non conventional chemical energies and design of
equipments.
Non Conventional Energy Sources and Environmental Aspects of Power Generation

Introduction to non conventional energy sources; Solar Energy; Physical principles of conversion of
UNIT– I
solar radiation into heat utilization; Flat Plate Collectors (FPC) and applications; Focusing Type
Collectors: Orientation and Sun tracking systems; Types and performance of concentrating
collectors: Cylindrical parabolic collector, Compound parabolic collector.
Solar Energy
Introduction to Solar energy; Applications of solar energy: Solar water heating, Space heating and
UNIT– II cooling, Solar photovoltaic cell, Solar cooking, Solar distillation & desalination, Solar industrial
process heating, Solar power generation, Solar Green House, Solar thermo mechanical power, Solar
refrigeration & air conditioning, Solar ponds.
Biomass, Biogas and Biodiesel
Introduction to biomass; Type of biomass sources; Energy from Biomass; Methods for obtaining
energy from biomass; Biomass conversion technologies; Biodigestion; Factors affecting
biodigestion, Thermal gasification of biomass; Gasifier: Classification, Advantages, Disadvantages
UNIT–III
and Application; Alcohol fuels from biomass: Overview, Feedstock, methods for alcohol production,
Ethanol as an alternative liquid fuel, Engine performance with alcohol fuels; Biogas:
Community/Industrial biogas plant; Design of a biogas plant, Advantages and disadvantages of
biogas plants, Utilization of biogas; Biodiesel from biomass.
Wind Energy, Tidal Energy and Wave Energy
Introduction to Wind Energy; Basic principles of wind energy conversion; Power in the wind;
Maximum power; Forces on the blades, lift and drag; Components of wind energy conversion
systems (WEC); Classification, advantages and disadvantages of WEC system; Types of wind
UNIT– IV machines, Performance of wind machines; Design considerations, Energy storage, Application of
wind energy, Environmental aspect.
Introduction to Tidal Energy: Components of tidal power plants; Single and double basin
arrangements; Estimation of energy and power; Advantages and limitations of tidal power.
Wave energy: Energy and power from wave energy; Advantages and disadvantages
UNIT– V Non Conventional Chemical Energies
 Introduction to Non Conventional Chemical Energies and Sources.
Fuel cells: Design, principle, classification, types, advantages and disadvantages, Work output and
EMF of fuel cells, Application of fuel cells.
Hydrogen energy: Introduction to Hydrogen Energy; Properties of hydrogen; Methods of hydrogen
production; Storage and transportation of hydrogen; Advantages and disadvantages; Applications.
Introduction to Atomic Energy.
Text Books

1. G D Rai, Non-Conventional Energy Sources, Khanna Publishers, New Delhi.

2. S P Sukhatme, Solar Energy-Principles of Thermal Collection & Storage, Tata McGraw Hill, New Delhi.

Reference Books:
1. John A Duffie & William A Beckman, Solar Energy Thermal processes, Wiley Interscience Publication.
2. P Garg & J Prakash, Solar Energy - Fundamentals and Applications, Wiley Interscience Publication.
3. Jay Cheng, Biomass to Renewable Energy Processes, 1st Edition, CRC Press.
Course Outcome:
1. Define non conventional energy sources and environmental aspects of power generation capably.
2. Illustrate Solar Energy and apply conceptual knowledge owing to various applications.
3. Describe and apply the technologies of biomass, biogas and biodiesel suitably.
4. Demonstrate wind energy, tidal energy and wave energy towards the need of the society.
5. Exemplify the various non conventional chemical energies and their suitable usages.
6. Explain and elucidate the critical calculations of various non conventional chemical energies and design of
equipments.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Air pollution and control measures Code: D000814(020)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35

Air Pollution: Problem, Definitions, Classification of pollutants, characteristics and sources.

UNIT–I A.P. Monitoring: Measurement of stack gases, Sampling methods, Difficulties in sampling,
sampling of SPM, stack sampling techniques.
Air pollution meterology, stability class condition, plume behaviour, topographical effects on air

UNIT–II pollution, wind profiles, windroses. Gaussian plume models, assumptions and limitations of GPM,
problem on modelling.
SOX sources, ambient concentrations, test methods, SOX control techniques, effects of SOX on
human, animal health, plants and on materials. NOX sources, ambient concentrations, test method
UNIT–III
control techniques, effects of NOX on human health, animal health, plants and on materials.
Particulate size distribution, collection and removal mechanics.
Major air pollution disaster episodes, special diseases caused by air pollution, symptoms of chronic

UNIT–IV air pollution. Mechanisms ofdeterioration in polluted atmospheres, effect of air pollution on art
treasures in India.
Air quality criteria and emission standards, US and Indian standards, air pollution act, constitution,

UNIT–V power and functions of the boards. Global effects of air pollution – Green house effect, acid rains,
ozone layer depletion, etc.
Text Books:
1. Environmental Engineering – Peavy& Rowe (Tata McGraw Hill, New Delhi).
2. Environmental Science and Engineering – Henry and Heinke (Pearson Education).
Reference Books:
1. Air Pollution – Henry C. Perkins, (McGraw Hill Kogakusha Ltd., Tokyo, Japan, 1974)
2. Air Pollution – Stern, Arthur C. (Academic Press, New York, USA, 1977)
3. Introduction to Environmental Science – Y. Anjaneyulu (B.S. Publications)
4. Waste Water Engineering – Metcalf Eddy (Tata McGraw Hill, New Delhi).
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Solid and Hazardous waste D000815(020)
Subject: management Code:

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35

Sources of Solid and Hazardous Wastes: Sources of solid and hazardous wastes - Need for solid
UNIT–I and hazardous waste management - Legislations on management and handling of municipal solid
wastes, hazardous wastes, and biomedical wastes.
Waste Generation: Waste generation rates - Composition - Hazardous Characteristics - TCLP tests
UNIT–II
- waste sampling- Source reduction of wastes - Recycling and reuse.
Municipal Solid Wastes Collection: Handling and segregation of wastes at source - storage and
UNIT–III collection of municipal solid wastes - Analysis of Collection systems - Need for transfer and
transport - Transfer stations.
Labeling and Handling of Hazardous Wastes: Waste processing - processing technologies -
biological and chemical conversion technologies – Composting,thermal conversion technologies -
UNIT–IV
energy recovery-incineration - solidification and stabilization of hazardouswastes - treatment of
biomedical wastes.
Solid Wastes Disposal in Landfills: Site selection - design and operation of sanitary landfills-
UNIT–V secure landfills and landfill bioreactors - leachate andlandfill gas management - landfill closure and
environmental monitoring - landfill remediation, Elements of integrated waste management.
Text Books:
1. George Tchobanoglous, Hilary Theisen and Samuel A, Vigil, Integrated Solid Waste Management,
McGraw- Hill, New York, 1993
2. CPHEEO, Manual on Municipal Solid waste management, Central Public Health and Environmental
Engineering Organization, Government of India, New Delhi, 2000.
Reference Books:
1. Solid Waste Management, Van Nostrand Reinhold Co. 1975.
2. C.L. ell, Solid Waste Management, John Wiley, 1975.
3. P.W. Powers. How to dispose of toxic substances and industrial Waste, Noyes Data Corporation, England,
1976.
Course Outcomes:
1. The students will describe the solid and hazardous wastes.
2. The students will explain generation rates of solid and hazardous wastes.
3. The students will describe handling and segregation of waste at source.
4. The students will discuss various regulations about the management and handling of hazardous waste.
5. The students will design and monitor a SWM Landfill.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Natural language processing Code: D000816(022)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: Upon completion of this course, the undergraduate students will be able to grasp the
significance of natural language processing in solving real-world problems. They will be able to map the
appropriate processing technique and implement them for Information Retrieval and Information Extraction
from Text and speech.
Introduction
Origins and challenges of NLP, Human languages, models, problem of ambiguity, processing
UNIT–I
paradigms; Phases in natural language processing, applications such as information extraction,
question answering, and machine translation.
Syntactic Analysis
Context Free Grammars, Grammar rules for English, Normal Forms for grammar. Syntax Analysis:
UNIT–II Parsing Natural Language, Representing text data - Part of speech tagging, Representation of
Syntactic Structure, Parsing Algorithms, Models for Ambiguity Resolution in Parsing, Multilingual
Issues
Semantic Analysis
Semantics- Meaning representation, Syntax-Driven Semantic analysis, lexical semantics, WordNet
UNIT–III
based similarity- Shallow parsing - Semantic representation, Word Sense Disambiguation-
Selectional restriction, machine learning approaches, dictionary based approaches.
Discourse Integration and Pragmatic Analysis
Discourse Processing: Cohension, Reference Resolution, Discourse Cohension and Structure
UNIT–IV Language Modeling: Introduction, N-Gram Models, Language Model Evaluation, Parameter
Estimation, Language Model Adaptation, Types of Language Models, Language-Specific Modeling
Problems, Multilingual and Crosslingual Language Modeling.
Speech Processing
Speech Fundamentals: Articulatory Phonetics – Production And Classification Of Speech Sounds;
Acoustic Phonetics – Acoustics Of Speech Production; SPEECH-ANALYSIS: Features, Feature
UNIT–V
Extraction And Pattern Comparison Techniques: Speech Distortion Measures– Mathematical And
Perceptual, SPEECH MODELING: Hidden Markov Models: Markov Processes, HMMs –
Evaluation.
Text Books:
1. Jurafsky, David, and James H. Martin. Speech and Language Processing: An Introduction to Natural
Language Processing, Computational Linguistics and Speech Recognition. Upper Saddle River, NJ:
Prentice-Hall, 2000. ISBN: 0130950696.
2. Christopher D. Manning and Hinrich Schutze, “Foundations of Statistical Natural Language Processing”,
MIT Press, 1999.
Reference Books:
1. Nitin Indurkhya, Fred J. Damerau “Handbook of Natural Language Processing”, Second Edition, CRC
Press,
2010.
2. James Allen “Natural Language Understanding”, Pearson Publication 8th Edition. 2012.
3. Alexander Clark, Chris Fox, Shalom Lappin, “The Handbook of Computational Linguistics
and Natural Language Processing”, Wiley-Blackwell, 2012
4. Siddiqui T., Tiwary U. S.. Natural language processing and Information retrieval,
OUP, 2008
Course Outcomes:
1. Describe the fundamental concepts and techniques of natural language processing.
2. Verify the syntax of any sentences using parsing.
3. Apply proper method to perform semantic analysis of a sentence.
4. Analyze a sentence for discourse integration.
5. Apply appropriate method to analyse speech and related parameters of speech.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Cluster and Grid Computing Code: D000817(022)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. Understand how Grid computing helps in solving large scale scientific problems.
2. Gain knowledge on the concept of virtualization that is fundamental to cloud computing.
3. Learn how to program the grid and the cloud.
4. Understand the security issues in the grid and the cloud environment.
Introduction
Evolution of Distributed computing: Scalable computing over the Internet – Technologies for
UNIT–I
network based systems – clusters of cooperative computers - Grid computing Infrastructures – cloud
computing - service oriented architecture – Introduction to Grid Architecture and standards
Grid Services
Introduction to Open Grid Services Architecture (OGSA) – Motivation – Functionality
UNIT–II
Requirements –Practical & Detailed view of OGSA/OGSI – Data intensive grid service models –
OGSA services.
Cluster Computing
Approaches to Parallel Computing, How to Achieve Low Cost Parallel Computing through Clusters,
Definition and Architecture of a Cluster, What is the Functionality a Cluster can Offer? Categories
UNIT–III
of Clusters, Cluster Middle ware : Levels and Layers of Single System Image (SSI), Cluster
Middleware Design Objectives, Resource Management and Scheduling, Cluster Programming
Environment and Tools. Early Cluster Architectures, High Throughput Computing Clusters, Condor.
Programming Model
Open source grid middleware packages – Globus Toolkit (GT4) Architecture , Configuration –
Usage of Globus – Main components and Programming model - Introduction to Hadoop Framework
UNIT–IV
- Mapreduce, Input splitting, map and reduce functions, specifying input and output parameters,
configuring and running a job – Design of Hadoop file system, HDFS concepts, command line and
java interface, dataflow of File read & File write.
Security
Trust models for Grid security environment – Authentication and Authorization methods – Grid
UNIT–V security infrastructure – Cloud Infrastructure security: network, host and application level – aspects
of data security, provider data and its security, Identity and access management architecture, IAM
practices in the cloud, SaaS, PaaS, IaaS availability in the cloud, Key privacy issues in the cloud.
Text Books:
 Kai Hwang, Geoffery C. Fox and Jack J. Dongarra, “Distributed and Cloud Computing: Clusters, Grids,
Clouds and the Future of Internet”, First Edition, Morgan Kaufman Publisher, an Imprint of Elsevier, 2012.

Reference Books:
1. Bart Jacob Michael Brown Kentaro Fukui Nihar Trivedi, “Introduction to Grid Computing”, IBM Redbooks
1st edition.
2. Jason Venner, “Pro Hadoop- Build Scalable, Distributed Applications in
 the Cloud”, A Press, 2009
3. Tom White, “Hadoop The Definitive Guide”, First Edition. O’Reilly, 2009
4. Bart Jacob (Editor), “Introduction to Grid Computing”, IBM Red Books, Vervante, 2005
5. Ian Foster, Carl Kesselman, “The Grid: Blueprint for a New Computing Infrastructure”,
2nd Edition, Morgan Kaufmann.
6. Frederic Magoules and Jie Pan, “Introduction to Grid Computing” CRC Press, 2009
7. Daniel Minoli, “A Networking Approach to Grid Computing”, John Wiley Publication,2005
8. Barry Wilkinson, “Grid Computing: Techniques and Applications”,
Chapman and Hall, CRC, Taylor and Francis Group, 2010
Course Outcomes:
At the end of the course, the student should be able to:
1. Apply grid computing techniques to solve large scale scientific problems.
2. Apply the concept of cluster computing.
3. Use the grid and cloud tool kits.
4. Apply the security models in the grid and the cloud environment.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Blockchain Code: D000818(022)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. The basics of cryptography used in Blockchain
2. Explain design principles of Blockchain.
3. Explain consensus algorithm used in distributed systems.
4. Explain the basic building blocks of Blockchain.
5. Explains the Blockchain system by sending and reading transactions.
6. Design, build, and deploy a distributed application.
7. Different real-life applications of Blockchain.
Introduction to Blockchain:
Need for Distributed Record Keeping,Blockchain architecture, blockheader detailed design, Abstract
UNIT–I
Models for Blockchain, Proof of Work ( PoW), liveness and fairness, Proof of Stake ( PoS) based
Chains, Hybrid models ( PoW + PoS); Types of Blockchain..
Blockchain Consensus: Blockchain Consensus Algorithm challenges and solutions, Modeling

UNIT–II faults and adversaries, Byzantine Models of Fault tolerance;Zero Knowledge proofs and protocols in
Blockchain
Introduction to cryptographic basics for cryptocurrency: A short description of Hashing, digital
UNIT–III
signature schemes, encryption schemes and elliptic curve cryptography, verifiable random functions.
Blockchain 2.0: Introduction to Ethereum, Ethereum Virtual Machine (EVM), Wallets for
Ethereum, Solidity, Smart Contracts, Attacks on smart contracts, The Turing Completeness of Smart
UNIT–IV
Contract Languages and verification challenges. Blockchain 3.0: Hyperledger implementation on
Ethereum,the plug and play platform and mechanisms in permissioned blockchain.
Application of Blockchain: Bitcoin: Bitcoin consensus, Wallet, Bitcoin Blocks, Merkley Tree,

UNIT–V hardness of mining, transaction verifiability, anonymity, forks, double spending, mathematical
analysis of properties of Bitcoin. Altcoins. Medical record management systems.
Text Books

1. Josh Thompson, ‘Blockchain: The Blockchain for Beginnings, Guilde to Blockchain

Technology and Blockchain Programming’, Create Space Independent Publishing Platform,
2017.
2. Arvind Narayanan, Joseph Bonneau, Edward Felten, Andrew Miller, and Steven Goldfeder, ‘Bitcoin
 and cryptocurrency technologies: a comprehensive introduction’, Princeton University Press, 2016.
3. Kumar Saurabh, AshutoshSaxena, ‘Blockchain Technology: Concepts and Applications’, Wiley, 2020

4. Dr. Sumit Kumar Mishra, Dr. Siddhartha Choubey , Dr. P. John Augustine, Mr. Mrutyunjaya S
Yalawar ,’ BLOCKCHAIN TECHNOLOGY’ SIPH 2022.
Course Outcomes:
At the end of the course, the student should be able to:
1. Understand the basic technology used in Blockchain

2. Understand the working principle of Blockchain systems (mainly Bit coin and Ethereum).

3. Able to understand and design any application specific consensus algorithm

4. Design, build and deploy Smart Contracts and distributed applications,

5. integrating the Blockchain technology into their own applications/ projects

 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Data Compression Code: D000819(022)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. Student will understand the important issues in data compression.
2. Student will have knowledge of variety of data compression techniques.
3. Student will be able to apply techniques for compression of binary programmes, data, sound and image.
4. Student will learn techniques for modelling data and the issues relating to modelling.
5. Student will learn techniques for data analysis and synthesis.
Information theoretic foundations: Compression techniques, Modeling and coding, Mathematical
preliminaries for lossless compression, Basic concepts of Information Theory, Algorithmic
UNIT– I
information theory, Minimum description length principle. Coding: uniquely decodable codes,
Prefix codes.
Lossless Coding: Physical Models, Probability Models, Markov Models, Composite Source Model,
Coding : Uniquely Decodable Codes, Prefix Codes, The Kraft-McMillan Inequality. Algorithmic
UNIT– II
Information Theory, Minimum Description Length Principle.Huffman Coding. Arithmetic Coding.
Dictionary Techniques. Context-Based Compression.Lossless Image Compression.
Lossy Coding: Distortion Criteria, Conditional Entropy, Average Mutual Information, Differential
UNIT–III
Entropy, Rate Distortion Theory. Scalar Quantization. Vector Quantization. Differential Encoding.
Transforms, Subbands, and Wavelets: Vector Spaces, Fourier Series, Fourier Transform, Linear

UNIT– IV Systems, Sampling, Discrete Fourier Transform, Z-Transform. Transform Coding. Subband Coding.
Wavelet- Based Compression. Audio Coding.
Analysis/Synthesis: Speech Compression, Wideband Speech Compression, Fractal Compression,

UNIT– V Video Compression, ITU-T Recommendation H.261, ITU-T Recommendation H.263, ITU-T
Recommendation H.264, MPEG-4 Part 10, Advanced Video Coding, ATM Networks
Text Books

1. Sayood, Khalid, Introduction to Data Compression, 3rd Edition, Morgan Kaufmann, 2006

2. Anderson, J.B. and Mohan, S., Source and Channel Coding, Kluwer, 1991.
 Reference Books:

1. Gersho, A. and Gray, R.M., Vector Quantization and Signal Compression, Kluwer, 1992.

2. Netravali, A.N., Digital Pictures, Representation and Compression, Plenum, 1989.

3. Rao, K.R. and Yip, P., Discrete Cosine Transform, Academic Press, 1990.

Course Outcomes:
At the end of the course, the student should be able to:
1. Understand the theoretical foundations of Data compression.
2. Understand the mathematical basis of Lossless coding.
3. Understand the mathematical basis of Lossy coding.
4. Understand the mathematical basis Transforms, Subbands and Wavelets.
5. Understand the foundations of Analysis and Synthesis.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Power Plant Engineering Code: D000820(025)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. Illustrate the working of Coal Based Thermal Power Plants.
2. Explain the Gas Turbine and Combined Cycle Power Plants.
3. Explain the functioning of Nuclear Power Plants.
4. Distinguish and classify Renewable Energy sources.
5. Evaluate related to plant economics, and propose pollution control techniques
Coal Based Thermal Power Plants: Layout of modern coal power plant, super critical boilers, FBC
UNIT– I boilers, turbines, condensers, steam and heating rates, subsystems of thermal power plants, fuel and
ash handling, draught system feed water treatment, binary cycles and cogeneration systems.
Gas Turbine and Combined Cycle Power Plants: Brayton cycle analysis and optimization,
UNIT– II components of gas turbine power plants, combined cycle power plants, Integrated Gasifier based
Combined Cycle (IGCC) systems.
Nuclear Power Plants: Basics of nuclear energy conversion, Layout and subsystems of nuclear
power plants, Boiling Water Reactor (BWR), Pressurized Water Reactor (PWR), CANDU Reactor,
UNIT–III
Pressurized Heavy Water Reactor (PHWR), Fast Breeder Reactors (FBR), gas cooled and liquid
metal cooled reactors, safety measures for nuclear power plants.
Renewable Energy system:Power from Renewable Energy Hydroelectric power plants,
UNIT– IV classification, typical layout and components, principles of Wind, Tidal, Solar PV and Solar
Thermal, Geothermal, Biogas and Fuel Cell power systems.
Energy and Environmental impacts:Energy, Economic and Environmental Issues of Power Plants
Energy, economic and environmental issues, power tariffs, load distribution parameters, load curve,
UNIT– V
capital and operating cost of different power plants, pollution control technologies including waste
disposal options for coal and nuclear plants.
Text Books

1. Nag P.K., Power Plant Engineering, 3rd ed., Tata McGraw Hill, 2008.

2. Tanmoy Deb 2017 , Electrical Power GenerationConventional and Renewable, Khanna

Publication.

3. Elliot T.C., Cen K and Swanekamp R.C., Power Plant Engineering, 2nd ed., McGraw Hill,
1998.

Reference Books:

1. B.R. Gupta, G eneration of Electrical Energy, 7th edn, S. Chand Publishing, 2017.

2. El Wakil M.M., Power Plant Technology, Tata McGraw Hill, 2010.

 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Utilization of Electrical Energy D000821(025)
Subject: and Electric Traction Code:

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
 This course provides an introduction to the principles of electrical drives and their applications.
 This course deals with the fundamentals of illumination and its classification.
 This course provides knowledge on electrical traction systems.
ELECTRIC DRIVES: Introduction concept of electric drives, Type of electric drives, choice of
motor, starting and running characteristics, speed control, temperature rise, particular applications of
UNIT– I
electric drives, types of industrial loads, continuous, intermittent, and variable loads, load
equalization.
ELECTRIC HEATING, WELDING & ELECTROLYTIC PROCESS: Advantages and
methods of electric heating, resistance heating, induction heating, and dielectric heating. Electric
UNIT– II
welding, resistance and arc welding, electric welding equipment, comparison between A.C. and D.C.
Welding. Principle, Faraday’s laws of electrolysis, current efficiency, energy efficiency.
ILLUMINATION: Introduction, terms used in illumination, laws of illumination, polar curves,
photometry, integrating sphere, sources of light. Discharge lamps, MV and SV lamps comparison
UNIT–III
between tungsten filament lamps and fluorescent tubes, Basic principles of light control, Types and
design of lighting and flood lighting.
ELECTRIC TRACTION – I: System of electric traction and track electrification. Review of
existing electric traction systems in India. Special features of traction motor, methods of electric
UNIT– IV
braking – plugging, rheostatic braking and regenerative braking. Mechanics of train movement.
Speed-time curves for different services – trapezoidal and quadrilateral speed time curves.
ELECTRIC TRACTION – II :Calculations of tractive effort, power, specific energy consumption

UNIT– V for given run, effect of varying acceleration and braking retardation, adhesive weight and braking
retardation adhesive weight and coefficient of adhesion
Text Books

1. Utilization of Electrical Energy - by E. Opens haw Taylor, University Press.

2. Art & Science of Utilization of Electrical Energy - by H.Partab , 3rd Edition, Pritam Surat &
Sons. 1980.
 Reference Books:
1. Utilization of Electrical Power and Electric Traction – by J.B.Gupta, 10th Edition,
S.K.Kataria& Sons, 2012.
2. Utilization of Electrical Power and Electric Traction - by G. C .Garg Khanna Publishers, 2004.
Course outcomes:
 To understand the operating principles and characteristics of traction motors with respect to speed,
temperature, loading condition.
 To acquaint with the different types of heating and welding techniques.
 To study the basic principles of illumination and its measurement.
 To understand the basic principle of electric traction including speed– time curves of different traction
services.
 To understand the method of calculation of various traction system for braking, acceleration and other
related parameters, including demand side management.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Introduction to Micro- D000822(025)
Subject: Code:
electromechanical systems (MEMS)
Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
 Have a concept on the scope and development of advances in of micro electromechanical systems
 Gain knowledge about the fabrication process and design of MEMS devices.
 Gain knowledge about the MEMS sensors, actuators and their applications in real world.
History of MEMS Development, Intrinsic characteristics of MEMS- miniaturization- scaling laws,
UNIT– I microelectric integration, Mass fabrication with precision., Applications of Micro electromechanical
systems, MEMS Materials and their Properties.
Microsystem fabrication processes: Photolithography, Ion Implantation, Diffusion, Oxidation.
Thin film depositions; Etching techniques: Dry and wet etching, electrochemical etching;
UNIT– II
Micromachining: Bulk Micromachining, Surface Micromachining,; LIGA process, Microelectronics
fabrication process flow; Packaging.
MEMS Sensors: Electrostatic sensing and actuators; parallel plate capacitor and their applications,
inter digitated finger capacitors; thermal sensors and applications: inertia sensor, infrared sensor;
UNIT–III
piezo resistive sensors and applications; Acoustic sensors, Vibratory gyroscope, Biomedical sensors
and biosensors.
Microactuation: Actuation using thermal forces, Actuation using shape memory Alloys, Actuation
using piezoelectric crystals, Actuation using Electrostatic forces (Parallel plate, Torsion bar, Comb
UNIT– IV
drive actuators), Micromechanical Motors and pumps, magnetic actuators. Case study: Comb drive
actuators and their applications.
Polymers in MEMS: polymide-SU-8 liquid crystal polymer(LCP)-PDMS-PMMA-Parylene-
UNIT– V Flurocorbon, Application-Acceleration, pressure, flow and tactile sensors. Optical MEMS-passive
MEMS optical components-lenses-mirrors-Actuation for active optical MEMS.
Text Books
1. Foundations of MEMS, Chang Liu, Pearson International Edition, 2012
2. Mems & Microsystems Design & Manufacture, Tai–Ran Hsu, Tata Mcgraw Hill, 2002.
3. G. K. Ananthasuresh, K. J. Vinoy, S. Gopalkrishnan K. N. Bhat, V. K. Aatre, Micro and Smart Systems,
Wiley India, 2012.
Reference Books:
1. Gaberiel M.Rebiz, “RF MEMS Theory,Design and Technology”, John Wiley & Sons,2003
2. Charles P.Poole, Frank J.Owens, “Introduction to nanotechnology” John Wiley & sons, 2003.
3. Julian W.Gardner, Vijay K Varadhan,, Osama O. Awadelkarim “Microsensors, MEMS and Smart
devices”, John Wiley & sons, 2001
4. S. E.Lyshevski, Nano-and Micro-Electromechanical systems: Fundamentals of Nano-and Micro
engineering (Vol. 8). CRC press, (2005).
Course outcomes:
 Interpret the basics of micro electromechanical systems, MEMS materials including their applications.
 Analyze micro fabrication processes and describe the micro fabrication process flow..
 Analyze the performance aspects of electromechanical transducers including sensors and actuators
 Design and model MEMS device.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Management Concepts & D000823(076)
Subject: Code:
Technique
40 Total Tutorial Ten (Minimum)
Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
 To develop skill of project planning and management amongst student.
 To understand the significance of human recourse and its proper utilization for the growth of organization.
 Students will learn to minimize the project cost by using effective management technique.
Basic management and techniques: Definition and nature of management, Function of
management, nature, purpose and objectives of planning, organizing and staffing, authority and
responsibility, controlling, process of controlling, control techniques.
UNIT– I Human resource management: nature and scope of human resource planning, training and
development, recruitment and selection, motivation and its types, need of motivation, reward and
punishment, models of motivation, performance appraisal, leaders, types of leaders, leadership
styles, roles and functions of leaders.
Marketing management: Marketing environment, customer markets and buyer behaviour,
marketing mix, advertising and sales promotion, channels of distribution.
UNIT– II
Financial management and accounting concepts: book keeping, financial statements analysis,
financial ratios, capital budgeting, and breakeven analysis.
Production/operations management: planning and design of production and operations systems,
facilities planning, location, layout and movement of materials, materials management and inventory
UNIT–III
control, maintenance management, PERT and CPM.

Management information systems: Role of information in decision making, information system

UNIT– IV planning, design and implementation, evaluation and effectiveness of the information system,
statistical quality control, total quality management and ISO certificate.
Social and ethical issues in management: ethics in management, social factors, unfair and
UNIT– V restrictive trade practices. Strategic and technology management: need, nature, scope and strategy
SWOT analysis, value chain concept.
Text Books
1. Principles of Management by Ankur chhabra, sun india publications
2.Principles and practice of Management by L.M. Prasad
3. Human Resource Management by V.S.P Rao. 2nd Edition.
Reference Books:
1. Industrial engineering and production management, MartandTelsang, S. Chand
2. Management science, Ramchandra, TMH.
3. Management theory and practice, Chandan, Vikas Pbs
Course outcomes:
 Students can successfully design and execute project.
 Students will be capable of understanding the correlation between physical, market and human resources.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Operational Research Code: D000824(028)
Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made t
 To introduce use quantative methods and techniques for effective decisions–making; model formulation
and applications those are used in solving business decision problems.
 To model decision making problems using major modeling formalisms of artificial intelligence and
operations research, including propositional logic, constraints, linear programs and Markov processes,
 To evaluate the computational performance of search, satisfaction, optimization and learning algorithms.
 To apply search, satisfaction, optimization and learning algorithms to real world problems
Linear Programming: LP formulations, Graphical method for solving LP with 2 variables,
Simplex method, Application of simplex method for maximization and minimization of LP
UNIT– I
problems, Artificial variable technique for finding the initial basic feasible solution, The Big-M
method, Degeneracy in simplex method, Duality theory in LP, Dual simplex method.
Transportation Model: North – West comer rule, Least cost method, Vogel's Approximation
method, Modi Method, Assignment problem, Dynamic Programming: Basic concepts, Bellman's
UNIT– II
optimality principle, Dynamic programming approach in decision making, Optimal subdivision
problem.
Inventory Model: Introduction to the inventory problem, Deterministic models, The classical EOQ
(Economic order quantity) model, Purchasing model with no shortage, Manufacturing model with no
UNIT–III
shortage, purchasing model with shortage, Manufacturing model with shortage, Inventory models
with probabilistic demand.
Sequencing and Queuing Theory: Sequencing problem, Johnson's algorithm for processing N-jobs
through 2 machine problem, N-jobs through 3 machine problem, 2- job through N machine by
UNIT– IV
graphical method, Characteristics of queuing system- steady state M/M/1, M/M/1K and M/M/C
queuing models.
CPM and PERT: Arrow network, Time estimates – Earliest expected time, Latest allowable
occurrence time and slack, Critical path, Probability of meeting scheduled date of completion of
UNIT– V project, Calculation on CPM network, Various floats for activities, Critical Path, Updating project,
Operation time cost trade off curve & project time cost trade off curve, selection of schedule based
on cost analysis.
Text Books
1. Operation Research, Panneerselvam, Prentice Hall of India
2. Operation Research: An Introduction - Hamdy a. Taha, Prentice Hall of India
Reference Books:
1. Gillett B.E, Introduction to Operation Research- A Computer Oriented algorithmic approach, Mc Graw Hill.
2. Kanti Swarup, Gupta. P.K.,Man Mohan, Operations Research, Sultan Chand & Sons.
3. Vohra N.D., Quantitative Techniques in Managemental, T.M.H.
4. Zoints. S.,Linear & Integer Programming, Prentice Hall
Course outcomes:
Identify and develop operational research models from the verbal description of the real system.
1. Understand the mathematical tools that are needed to solve optimization problems.
2. Develop a report that describes the model and the solving technique, analyze the results and propose
recommendations in language understandable to the decision-making processes in Management Engineering.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Android Apps Development Code: D000825(028)
Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
 Learn the set up and installation of Android
 Learn Android App development
 Learn user interfaces and Controls.
Installation and Setup on Android :Environment Setup – Installation & Setup of SDK tools on
Windows; Installing platforms and samples; Creating an Android Virtual Device (emulator);
UNIT– I
Installing Eclipse on a Windows machine; Installing the Android Development Tools; Preparing
an Android device for development.
Android App Development : Overview of Android development; Understanding project creation
and structure; Working with the AndroidManifest.xml file; Creating and managing activities;
UNIT– II
Using explicit intents; Using implicit intents; Creating and using resources; Understanding security
and permissions; Debugging an app.
User interface and Controls : Understanding units and layout; Using layout managers; Working

UNIT–III with text controls; Building button controls; Building list controls; Building custom list layouts;
Other interesting controls.
Graphics and Animation : Creating and using styles; Creating and using themes ; Creating icons;

UNIT– IV Creating NinePatch drawables, Setting up frame-by-frame animation; Showing tween animation;
Working in 2D graphics.
Supporting Multiple Screens : Understanding screen size and density; Providing alternate
UNIT– V
layouts
Text Books
1. Mobile Apps for Android (IBM ICE).
Reference Books:
1. David Tainar – Mobile Computing: Concepts Methodologies, Tools & Applications.
2. Barbara L Ciaramtaro – Mobile technology consumption.
Course outcomes:
 Gain knowledge of set up and installation of Android
 Gain App development knowledge.
 Gain knowledge of user interfaces on Mobile Apps.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Digital Switching & Multiplexing Code: D000826(028)
Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. To understand the knowledge of telecommunication networks and its different services.
2. To analyze and evaluate fundamental telecommunication traffic models, packet switching services and
statistical time division multiplexing.
3. To describe the characteristics of the telephone systems and make use of the parameters in designing
telephone switches.
4. To describe the performance of a digital telephone switch.
5. To evaluate integrated broadband access using telecommunications systems and SONET multiplexing.
Introduction: Evolution of telecommunication, basics of switching system, step-by-step switching,
UNIT– I design considerations. Principles of crossbar switching, electronic space division switching, stored
program control, software architecture, switching functions.
Digital Transmission: Frequency division multiplexing, time division multiplexing, statistical
division multiplexing, switching hierarchy, synchronous digital hierarchy both USA and European
standards. Message switching, circuit switching and packet switching, space division switching, time
UNIT– II
division switching. Two dimensional switching, grade of service, non-blocking, digital cross
connect, concentrators, expanders and distributors, two stage networks, three stage networks, n-stage
networks.
Time Division Switching: Time division space switching, time division time switching, time
UNIT–III multiplexed space switching. Time multiplexed time switching, space-time combination switching,
three stage combination switching, n-stage combination switching, signaling techniques.
Telecommunication Traffic: Units of traffic, network traffic load and parameters, grade of service
and blocking probability, traffic measurement, mathematical model, incoming traffic and service
UNIT– IV time characteristics, blocking models and loss estimates, delay systems. Digital subscriber access–
ISDN, high data rate digital subscriber loops, digital loop carrier systems, fibre in the loop, voice
band modems, digital satellite services, broadband switching systems.
Network Synchronization Control and Management: Timing, timing inaccuracies, network
synchronization, network control and management. SONET/SDH – SONET multiplexing overview,
UNIT– V frame formats, operation, administration and maintenance, frequency justification and payload
framing, virtual tributes, DS3 payload mapping, E4 payload mapping, SONET optical standards,
SONET rings and networks.
Text Books
1. Viswanathan, Thiagarajan, Bhatnagar, Manav, Telecommunication Switching Systems and Networks, 2/e,
Prentice Hall of India, 2015.
2. John C. Bellamy, Digital Telephony, 3/e, Wiley Student Edition, 1999
Reference Books:
1. J E Flood, Telecommunications Switching, Traffic and Networks, Pearson Education, 2004.
2. Gokhale, Introduction to Telecommunications, 2/e, Cengage Learning, 20 Robert G. Winch,
Telecommunication Transmission Systems, 2/e, Tata McGraw Hill, 2004.
Course outcomes:
1. Understand the characteristics of the telephone systems, network synchronization and management.
2. Explain telephone transmission systems, evaluate PSTN and electromechanical switching system.
3. Evaluate fiber based wide area networks, model and estimate the telecom traffic.
4. Design and test telecom switching systems.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Optimization Techniques Code: D000827(028)

Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)

Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. The basic concepts of Optimization.
2. The emphasis of this course is on different classical Optimization techniques linear programming and
simplex algorithms.
3. About optimality of balanced transportation Problems.
4. About Constrained and unconstrained nonlinear programming.
5. About principle of optimality and dynamic programming.
Introduction and Classical Optimization Techniques: Statement of an Optimization problem –
design vector – design constraints – constraint surface – objective function – objective function
surfaces – classification of Optimization problems. Classical Optimization Techniques: Single
variable Optimization – multi variable Optimization without constraints – necessary and sufficient
UNIT– I
conditions for minimum/maximum – multivariable Optimization with equality constraints. Solution
by method of Lagrange multipliers – multivariable Optimization with inequality constraints – Kuhn
– Tucker conditions – Numerical examples.

Linear Programming : Standard form of a linear programming problem – geometry of linear

programming problems – definitions and theorems – solution of a system of linear simultaneous
UNIT– II
equations – pivotal reduction of a general system of equations – motivation to the simplex method –
simplex algorithm – Numerical examples.
Nonlinear Programming – One Dimensional Minimization methods Introduction, Unimodal
function, Elimination methods- Unrestricted Search, Exhaustive Search, Dichotomous Search,
UNIT–III
Fibonacci Method, Golden Section Method and their comparison; Interpolation methods - Quadratic
Interpolation Method, Cubic Interpolation Method and Direct Root Methods – Numerical examples.
Unconstrained & Constrained Nonlinear Programming
Unconstrained Optimization Techniques: Introduction- Classification of Unconstrained
Minimization Methods, General Approach, Rate of Convergence, Scaling of Design Variables;
Direct Search methods- Random Search Methods, Grid Search Method, Pattern Directions, Powell’s
UNIT– IV Method and Simplex Method
Constrained Optimization Techniques: Introduction, Characteristics of a Constrained Problem,
Direct Search Methods - Random Search Methods, Basic Approach in the Methods of Feasible
Directions, Rosen’s Gradient Projection Method, Generalized Reduced Gradient Method and
Sequential Quadratic Programming.
Dynamic Programming Dynamic programming multistage decision processes – types – concept of
sub optimization and the principle of optimality – computational procedure in dynamic
UNIT– V
programming – examples illustrating the calculus method of solution - examples illustrating the
tabular method of solution – Numerical examples.
Text Books
1. S. S. Rao, “Engineering optimization”: Theory and practice 3rd edition, New Age International (P)
Limited, 1998.
 1. H.S. Kasana & K.D. Kumar, “Introductory Operations Research Springer (India)”, 2004

Reference Books:
1. R Fletcher, “Practical Methods of Optimization” , 2 nd Edition, Wiley Publishers, 2000.

2. Jorge Nocedal and Wright S, “Numerical Optimization Springer”, 1st Edition, 1999.

3. by K.V. Mital and C. Mohan, “Optimization Methods in Operations Research and systems Analysis” 3
rd Edition, New Age International (P) Limited, 1996.

4. by S.D. Sharma, “Operations Research”, Kedar Nath, 2012.

5. by H.A. Taha, “Operations Research”, 9 th Edition, An Introduction Pearson, 2010.

6. G. Hadley, “Linear Programming”, Narosa, 2002..

Course outcomes:
1. Basic methods, principles in optimization

2. Formulation of optimization models, solution methods in optimization

3. Finding initial basic feasible solutions.

4. Methods of linear and non-linear (constrained and unconstrained) programming.

5. Applications to engineering problems.

 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Business Intelligence Code: D000828(033)

Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)

Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. Expose with the basic rudiments of business intelligence system
2. Understand the modeling aspects behind Business Intelligence
3. Understand of the business intelligence life cycle and the techniques used in it
4. Exposed with different data analysis tools and techniques
Introduction to Business Intelligence: BI concept, BI architecture, BI in today’s perspective, BI
Process, Applications of BI like Financial analysis, statistical analysis, sales analysis, CRM, result
UNIT– I
pattern and ranking analysis, Balanced Scorecard, BI in Decision Modelling: Optimization, Decision
making under uncertainty. Ethics and business intelligence.
Data Science: The concept, process and typical tools in data science. Example of different
algorithms i.e segmentation, classification, validation, regressions, recommendations. Exercises
UNIT– II
using Excel and R to work on histograms, regression, clustering and text analysis. Correlation
between Algorithm and Code in data science
Data Visualization and Dashboard Design, Performance Dashboard: Responsibilities of BI
analysts by focusing on creating data visualizations and dashboards. Importance of data
UNIT–III visualization, types of basic and composite charts. Measuring, Monitoring and management of
Business, KPIs and dashboard, the types of dashboards, the common characteristics of Enterprise
dashboard, design of enterprise dashboards, and the common pitfalls of dashboard design.
Modelling and Analysis: Exploring Excel Modeling capabilities to solve business problems,
UNIT– IV summarize and present selected data, introduction to business metrics and KPIs, creating cubes
using Microsoft Excel.
Future of Business Intelligence: Emerging Technologies, Machine Learning, Predicting the Future
UNIT– V with the help of Data Analysis, BI Search & Text Analytics – Advanced Visualization – Rich
Report, and Future beyond Technology.
Text Books
1. R. N. Prasad, Seema Acharya , “Fundamentals of Business Analytics”, ISBN: 978-81-256-3203-2, Wiley-
India, January 2011.
2. Wolfgang Jank , “Business Analytics for managers”, ISBN-13 : 978-1461404057, Springer; August 2011.
3. Jeffrey Camm, James Cochran, Jeffrey Ohlmann, David Anderson, Dennis Sweeney, Thomas Williams.
Michael Fry, “Essentials of Business Analytics”, ISBN-13 : 978-1305627734, South-Western College
Publishing; 2nd edition, February 2016.
Reference Books:
1. Efraim Turban, Ramesh Sharda, Dursun Delen, “Decision Support and Business Intelligence Systems”,
Pearson, 9th Edition, 2011.
2. David Loshin Morgan, Kaufman, “Business Intelligence: The Savvy Manager‟s Guide”, Second Edition,
2012.
 3. Larissa T. Moss, S. Atre, “Business Intelligence Roadmap: The Complete Project Lifecycle of Decision
Making”, Addison Wesley, 2003
4. Carlo Vercellis, “Business Intelligence: Data Mining and Optimization for Decision Making”, Wiley
Publications, 2009.
5. Ralph Kimball, Margy Ross , The Kimball Group Reader: Relentlessly Practical Tools for Data
Warehousing and Business Intelligence, Wiley Publications, 2010
Course outcomes:
1. Explain the fundamental concepts, processes of business intelligence.
2. Link data science with business intelligence and apply data science practices and methodologies to
visualize information from raw data.
3. Implement BI techniques by using various tools and Create data visualization.
4. Describe various techniques for descriptive, predictive and prescriptive analytics and apply business
intelligence methods
5. Apply various modeling techniques to solve real-world data analysis problems to various situations.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Game Theory Code: D000829(033)
Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. To applying game theory in a diverse set of situations.
2. To understanding and analysing problems in disciplines such as economics, business and political
science etc.
Introduction to combinatorial games, the game of Nim, sums of games. Equivalent games, sums of
UNIT– I Nim heaps, Poker Nim and the mex rule, equivalence of combinatorial games to Nim, finding Nim
values.
A quick tour of game theory, games as trees and in strategic form, backward induction, reduced
UNIT– II strategies. Nash Equilibrium, subgame perfect Nash Equilibrium, examples: The Threat Game, The
Prisoner’s Dilemma, Matching Pennies, Rock-Paper-Scissors.
Mixed strategy Nash equilibria. Inspection games, bimatrix game payoffs, best response condition,
the “difference trick”, the upper envelope method, degenerate games. Mixed strategy Nash equilibria
UNIT–III
continued. Brouwer’s fixed point theorem, proof of existence of Nash equilibria, finding mixed
equilibria, zero-sum games, the minimax theorem.
Geometric representation of equilibria, Lemke-Howson algorithm for efficient calculation of
equilibria, odd number of Nash equilibria. Game trees with imperfect information. Information sets,
perfect recall, behavior strategies, Kuhn’s Theorem, subgames and subgame perfect equilibria,
UNIT– IV
signally games. Bargaining. Bargaining sets and bargaining axioms, the Nash bargaining solution,
splitting the UNIT pie, the ultimatum game and stationary strategies, relation between the Nash
bargaining solution and the ultimatum game.
Coalitional games with transferable utility. Definition, examples: simple games, weighted majority
UNIT– V games. Solution concepts, imputations, the core. The Bondareva-Shapley Theorem, market games,
the Shapley value.
Text Books
1. B. von Stengel, Game Theory Basics
2. M. Maschler, E. Solan and S. Zamir: Game Theory, CUP, 2013

Reference Books:
1. K. Binmore, Playing for Real: Game Theory CUP, 2007
2. E. Mendelson, Introducing Game Theory and Its Applications, CRC 2004.
3. M. J. Osborne and A. Rubinstein, A Course in Game Theory, MIT press, 1994
Course outcomes:
1. Understand the working of combinatorial games
2. Understand the fundaments of game Theory
3. Design strategy for game playing
4. Represent equilibrium conditions in game playing
5. Differentiate various games with their working
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Optimization Design and Techniques Code: D000830(033)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. Understand the overview of optimization techniques, concepts of design space, constraint surfaces and
objective function.
2. Review differential calculus in finding the maxima and minima of functions of several variables.
Introduction: Statement of an Optimization problem , design vector , design constraints , constraint
surface , objective function , objective function surfaces , classification of Optimization problems.
Classical Optimization Techniques: Single variable Optimization, Multi variable Optimization
UNIT– I
with and without constraints, Multivariable Optimization with equality constraints , solution by
method of Lagrange multipliers, Multivariable Optimization with inequality constraints , Kuhn –
Tucker conditions.
Linear Programming: Various definitions, statements of basic theorems and properties,
Advantages, Limitations and Application areas of Linear Programming, Graphical method of Linear
UNIT– II Programming problem.
Simplex Method: Phase I and Phase II of the Simplex Method, The Revised Simplex method,
Primal and Dual Simplex Method, Big –M method.
Transportation Problem: Finding initial basic feasible solution by north – west corner rule, least
cost method and Vogel’s approximation method , testing for optimality of balanced transportation
problems. (Including assignment and travelling salesman problems) (No degeneracy problems)
UNIT–III
Queuing Models : Essential features of queuing systems, operating characteristics of queuing
system, probability distribution in queuing systems, classification of queuing models, solution of
queuing M/M/1 : ¥ /FCFS,M/M/1 : N/FCFS, M/M/C : ¥/FCFS, M/M/C : N/FCFS.
Dynamic Programming: Dynamic programming multistage decision processes , types , concept of
sub optimization and the principle of optimality , computational procedure in dynamic programming
, examples illustrating the calculus method of solution , examples illustrating the tabular method of
UNIT– IV solution.
Integer Programming: Pure and mixed integer programming problems, Solution of Integer
programming problems , Gomory’s all integer cutting plane method and mixed integer method,
branch and bound method, Zero-one programming.
Simulation Modeling: Introduction, Definition and types, Limitations, Various phases of modeling,
UNIT– V
Monte Carlo method, Applications, advantages and limitations of simulation
Text Books
1. Engineering optimization: Theory and practice”-by S.S.Rao, New Age International (P) Limited.
2. Operations Research: An Introduction" by H A Taha, 5th Edition, Macmillan, New York.
3. Operations Research by NVR Naidu, G Rajendra, T Krishna Rao, I K International Publishing house, New
Delhi.
Reference Books:
1. Optimization Methods in Operations Research and systems Analysis” – by K.V. Mittal and C. Mohan, New
Age, International (P) Limited, Publishers
 2. Operations Research – by S.D.Sharma, Kedarnath Ramanath & Co
3. Linear programming, G. Hadley, Narosa Publishing House, New Delhi.
4. Industrial Engineering and Production Management, M. Mahajan, Dhanpat Rai& co
Course outcomes:
1. Formulate real-life problems with Linear Programming.
2. Solve the Linear Programming models using graphical and simplex methods.
3. Formulate real-life transportation, assignment and travelling salesman problems to find the optimum
solution using transportation algorithms
4. Analyze the Queuing model for effective customer satisfaction
5. Apply dynamic programming to optimize multi stage decision problems.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Software Metrics and Quality D000831(033)
Subject: Code:
Assurance
Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
1. To gain basic knowledge about metrics, measurement theory and related terminologies
2. To introduce the basics of software reliability and to illustrate how to perform planning, executing and
testing for software reliability
3. To explore various metrics and models of software reliability
4. To compare various models of software reliability based on its application
What Is Software Quality: Quality Popular Views, Quality Professional Views, Software Quality,
Total Quality Management, and Summary. Fundamentals Of Measurement Theory: Definition,
Operational Definition, And Measurement, Level Of Measurement, Some Basic Measures,
UNIT– I Reliability And Validity, Measurement Errors, Be Careful With Correlation, Criteria For Causality,
Summary. Software Quality Metrics Overview: Product Quality Metrics, In Process Quality Metrics,
Metrics for Software Maintenance, Examples for Metrics Programs, Collecting software
Engineering Data.
Applying The Seven Basic Quality Tools In Software Development: Ishikawa’s Seven Basic
Tools, Checklist, Pareo Diagram, Histogram, Run Charts, Scatter Diagram, Control Chart, Cause,
UNIT– II
and Effect Diagram. The Rayleigh Model: Reliability Models, the Rayleigh Model Basic
Assumptions, Implementation, Reliability and Predictive Validity.
Complexity Metrics and Models: Lines of Code, Halstead’s Software Science, Cyclomatic
Complexity Syntactic Metrics, An Example of Module Design Metrics in Practice .Metric And
UNIT–III Lessons Learned for Object Oriented Projects: Object Oriented Concepts And Constructs, Design
And Complexity Metrics, Productivity Metrics, Quality And Quality Management Metrics, Lessons
Learned For object oriented Projects.
Availability Metrics: Definition and Measurement of System Availability, Reliability Availability
and Defect Rate, Collecting Customer Outage Data For Quality Improvement, In Process Metrics
UNIT– IV For Outage And Availability. Conducting Software Project Assessment: Audit Ad Assessment,
Software Process Maturity Assessment And Software Project Assessment, Software Process
Assessment A Proposed Software Project Assessment Method.
Dos And Don’ts Of Software Process Improvement :Measuring Process Maturity, Measuring
Process Capability, Staged Versus Continuous Debating Religion, Measuring Levels Is Not Enough,
Establishing The Alignment Principle ,Take Time Getting Faster, Keep it Simple Or Face DE
UNIT– V complexification, Measuring The Value Of Process Improvement ,Measuring Process Compliance ,
Celebrate The Journey Not Just The Destination. Using Function Point Metrics to Measure Software
Process Improvement: Software Process Improvement Sequences, Process Improvement Economies,
Measuring Process Improvement a Activity Levels.
Text Books
1. Norman E-Fentor and Share Lawrence Pflieger.” Software Metrics”. International Thomson Computer
Press, 1997.
2. Stephen H Khan: Metrics and Models in Software Quality Engineering, Pearson 2nd edition 2013.
 Reference Books:
1. S.A. Kelkar, “Software quality and Testing, PHI Learning, Pvt., Ltd., New Delhi 2012.
2. Watts S Humphrey, “Managing the Software Process”, Pearson Education Inc, 2008.
3. Mary Beth Chrissis, Mike Konrad and Sandy Shrum, “CMMI”, Pearson Education (Singapore) Pvt. Ltd.,
2003
4. Philip B Crosby, " Quality is Free: The Art of Making Quality Certain ", Mass Market, 1992
Course outcomes:
1. Identify and apply various software metrics, which determines the quality level of software
2. Identify and evaluate the quality level of internal and external attributes of the software product
3. Compare and Pick out the right reliability model for evaluating the software
4. Evaluate the reliability of any given software product
5. Design new metrics and reliability models for evaluating the quality level of the software based on the
requirement.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Energy Management & Audit Code: D000833(037)

Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)

Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
To impart knowledge on sources of energy, energy utilization and energy conversion system, energy balance,
energy action planning, energy audit, economics and finance.
Energy Sources

UNIT– I Introduction, Sources of energy – conventional and non-conventional, elasticity of demand and
application, concepts to energy, Indian energy scene, energy storage, solar energy, water, battery and
mechanical storage Systems.
Energy Utilization and Conversion System
Classification of furnaces, controlled atmosphere in furnaces, furnace fuels, efficient use of energy
UNIT– II in furnaces, thermal efficiency, reducing heat losses.
Combined Power and Heating System
Characteristics of prime movers, heat and Power requirements, economics of a CHP System.
Material and Energy balance
Facility as an energy system, methods for preparing process flow, material and energy balance
diagrams.
Energy Action Planning
UNIT–III
Key elements, force field analysis, energy policy purpose, perspective, contents, formulation,
ratification, organizing –location of energy management, top management support, managerial
function, roles and responsibilities of energy manager, accountability, motivation, Information
system – design barriers, strategies, marketing and communicating-training and planning.
Energy Audit
UNIT– IV Energy Management information system, thirty nine steps for energy management, types of energy
audit, preliminary energy audits, and technical assistance in energy audit, energy accounting and
analysis, Instruments used in Energy auditing.
Economics and Finance
Introduction, economics, discounted cash flow, loans, investments, option identification and
UNIT– V
analysis, optimization, conflict correction, constructing the optimal target investment schedule,
project management, monitoring against the target financial schedule.
Text Books
1. Engineering Economics & Engineering Management – R. Raju – Anuradha Agencies.
2. Energy Engineering & Management - Chakrabarti – PHI, Delhi
Reference Books:
1. Energy Management – W.R. Murphy, G. Mckay – Elesvier, Gudgaon.
2. Energy Management – Paul O’Callaghan – McGraw Hill – New Delhi.
3. Principles of Energy Conversion – Archie W. Culp –– McGraw Hill,Delhi.
4. Energy Management in illuminating System – Kao Chen – CRC Publishers.
5. Industrial Energy Recovery - D.A. Reay – Wiley Publishers.
6. Thermal Energy Recovery – T.L. Boyer – Wiley Publishers.
 7. Energy Conservation through Control – E.G. Shinskey – Academic Press.
8. Economics of Solar Energy & Conservation Systems, Vol-I & II – F. Kreith & R.E. West – CRC Press
Course outcomes:
1. Describe sources of energy and energy storage systems.
2. Describe energy utilization and energy conversion system.
3. Explain material and energy balance and describe energy action planning.
4. Demonstrate the significance of energy audit, types of instruments required for energy audit and procedure
to conduct energy audit.
5. Apply different methods used for the economic analysis of energy projects.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Cyber Security and Information D000834(033)
Subject: Code:
Security
Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives: The student should be made to:
The main objective of the course is to introduce students to cyber security concepts and techniques and foster
their abilities in designing and implementing solutions for real-world problems.
Security Policies and Management: Security Policy Design, Designing Security Procedures, Risk
Assessment Techniques, Security standards. Security Models - Biba Model, Chinese Wall, Bell La
UNIT– I
Pedula Model, Physical and Environmental Security, Server Room Design, Firefighting equipment,
Temperature/humidity Control etc
Application Security: Databases, Email and Internet etc, Communications and Operations

UNIT– II Management: Network Architecture, Network Operations Security Devices (Firewalls, IDS/IPS,
Antivirusetc), Routers/Switches.
Business Continuity Planning and Management: Business Impact Analysis, Business
UNIT–III
Continuity/Disaster Recovery Plans, Access Control - Logical and physical access Control
Software Development, Maintenance and Support: Security in development methodology,
UNIT– IV
Security testing, Segregation of duties
Cyber Forensics: Introduction to forensic tools, Evaluation of crime scene and evidence collection,

UNIT– V Usage of tools for disk imaging and recovery processes. Introduction to Information Security
Standards - ISO 27001, PCI DSS .Compliance - IT Act, Copy Right Act, Patents etc
Text Books
1. Security Engineering: A Guide to Building Dependable Distributed Systems - Ross J. Anderson - John
Wiley, New York.
2. Computer Security: Art and Science - Matt Bishop - Addison Wesley, Boston, MA
Reference Books:
Online Textbook Materials www.securityplusolc.com
Course outcomes:
1. Demonstrate an understanding of security policies and management
2. Demonstrate a basic understanding of application security
3. Demonstrate an understanding of business continuity planning and management
4. Demonstrate an understanding of software development, maintenance and support
5. Demonstrate an understanding of cyber forensics.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Nanotechnology Code: D000835(067)

Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)

Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35

Introduction to nanotechnology: background, definition , basic ideas about atoms and molecules,
UNIT– I
physics of solid state, review of properties of matter and quantum mechanics
Preparation of Nano structured Materials : Lithography : nano scale lithography, E-beam

UNIT– II lithography, dip pen lithography, nano sphere lithography. Sol gel technique Molecular synthesis,
Self-assembly, Polymerization
Characterization of Nano structured materials : Microscopy: TEM, SEM, SPM techniques,
confocal scanning microscopy,, Raman microscopy-Basic principles, applicability and practice to
colloidal, macromolecular and thin film systems. Sample preparation and artifacts. Polymer
fractionation techniques: SEC, FFF, Gel electrophoresis.: Basic theory, principles and practice.
UNIT–III
Thermal analysis: Basic principles, theory and practice. Micro DSC in the study of phase behavior
and conformational change.
Mass spectrometry of polymers: MALDI TOF MS – Basic theory, principles and practice.
Applicability to proteins, polyethers, controlled architecture systems
Cross-cutting Areas of Application of Nanotechnology : Energy storage, Production and
Conversion. Agriculture productivity enhancement Water treatment and remediation. Disease
diagnosis and screening. Drug delivery systems. Food processing and storage. Air pollution and
UNIT– IV
remediation. Construction. Health monitoring..Vector and pest detection, and control. Biomedical
applications. Molecular electronics. Nanophotonics. Emerging trends in applications of
nanotechnology
Industrial Implications of Nanotechnology : Development of carbon nanotube based composites.
Nanocrystalline silver Antistatic conductive coatings. Nanometric powders. Sintered ceramics.
UNIT– V
Nanoparticle ZnO and TiO2 for sun barrier products. Quantum dots for biomarkers. Sensors.
Molecular electronics. Other significant implications
Text Books:
1. Guozhong Cao, “Nanostructures and Nanomaterials”, Imperial College Press, London
2. Mark Ratner and Daniel Ratner, “A Gentle Introduction to Next Big Thing”, PearsonEducation 2005
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Supply Chain Management Code: D000836(022)

Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)

Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objective:
The objective of this module is to provide the participants with a good knowledge on supply
chain management and how these topics can be related with the organization and their business
needs.
FUNDAMENTALS OF SUPPLY CHAIN MANAGEMENT
Supply chain networks, Integrated supply chain planning, Decision phases in s supply chain,
UNIT– I process view of a supply chain, supply chain flows, Overview of supply chain models and
modeling systems, Supply chain planning: Strategic, operational and tactical, Understanding
supply chain through process mapping and process flow chart.
SCM STRATEGIES, PERFORMANCE
Supply chain strategies, achieving strategic fit, value chain, Supply chain drivers and obstacles,
Strategic Alliances and Outsourcing, purchasing aspects of supply chain, Supply chain
UNIT– II
performance measurement: The balanced score card approach, Performance Metrics. Planning
demand and supply: Demand forecasting in supply chain, Aggregate planning in supply chain,
Predictable variability.
PLANNING AND MANAGING INVENTORIES
Introduction to Supply Chain Inventory Management. Inventory theory models: Economic Order
UNIT–III
Quantity Models, Reorder Point Models and Multiechelon Inventory Systems, Relevant
deterministic and stochastic inventory models and Vendor managed inventory models.
DISTRIBUTIONMANAGEMENT
Role of transportation in a supply chain - direct shipment, warehousing, cross-docking; push vs.
UNIT– IV pull systems; transportation decisions (mode selection, fleet size), market channel structure, vehicle
routing problem. Facilities decisions in a supply chain. Mathematical foundations of distribution
management, Supply chain facility layout and capacity planning.
STRATEGIC COST MANAGEMENT IN SUPPLY CHAIN
The financial impacts, Volume leveraging and cross docking, global logistics and material
UNIT– V
positioning, global supplier development, target pricing, cost management enablers, Measuring
service levels in supply chains, Customer Satisfaction/Value/Profitability/Differential Advantage.
Text Books
1. David Simchi-Levi, Philip Kaminsky, and Edith Simchi-Levi Designing and Managing the Supply
Chain: Concepts, Strategies, and Case Studies, Second Edition, McGraw-Hill/Irwin, New York, 2003. 31
2. Sunil Chopra and Peter Meindel. Supply Chain Management: Strategy, Planning, and Operation,
Prentice Hall of India, 2002.
3. Sunil Chopra & Peter Meindl, Supply Chain Management , Prentice Hall Publisher, 2001
4. Robert Handfield & Ernest Nichols, Introduction to Supply Chain Management , Prentice hall Publishers,
1999.
Course outcomes:
On completion of this program student will know how the Supply chain management is essential to
company success and customer satisfaction and also how SCM knowledge and capabilities can be used
to support medical missions, conduct disaster relief operations, and handle other types of emergencies.
SCM also plays a role in cultural evolution and helps improve our quality of life.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology
Branch: Common to all Branches Semester: VIII
Subject: Electrical Estimation and Costing Code: D000837(024)

40 Total Tutorial Ten (Minimum)

Total Theory Periods:
Periods:
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objective:
 To give exposure to basic concepts estimating and costing.
 To impart knowledge about material requirements for various Electrical installations.
 To provide guidelines for preparation of Electrical drawings for residential and commercial buildings, ,
distribution substation, grid substation, overhead Lines
Principles of Estimation and Residential Building Electrification
Introduction to estimation and costing, Electrical Schedule. Determination of cost material and
labor Contingencies. Overhead charges. General Rules guidelines for wiring of residential
installation and positioning of equipments, Principles of circuit design in lighting and power circuits.
UNIT– I Procedures for designing the circuits and deciding the number of circuits, Method of drawing single
line diagram. Selection of type of wiring and rating of wires and cables Load calculations and
selection of size of conductor, Selection of rating of main switch Distribution board, protective
switchgear and wiring accessories, Preparation of detailed estimates and costing of residential
installation.
Electrification of Commercial Installation
Design considerations of electrical installation system for commercial building, Load calculation
and selection of size of service connection and nature of supply, Deciding the size of the cables, bus
UNIT– II
bar and bus bar chambers, Mounting arrangements and positioning of switchboards, distribution
boards main switch etc, Earthing of the electrical installation, Selection of type wire, wiring system
and layout, Preparation of detailed estimate and costing of commercial installation.
Service Connection, Power Circuits, Inspection and Testing of Installation Concept of service
connection, Types of service connection and their features, Method of installation of service
connection, Estimates of underground and overhead service connections, Inspection of internal
UNIT–III wiring installations, Inspection of new installations, testing of installations, testing of wiring
installations, Important considerations regarding motor installation wiring, Determination of rating
of cables Determination of rating of fuse, Determination of size of Conduit, distribution Board main
switch and starter.
Design of Overhead Transmission and Distribution Lines
Introduction, Typical AC electrical LT system, Main components of overhead lines, Line supports.
Factors governing height of pole, Conductor materials, Cross arms, Pole brackets and clamps, Guys
and Stays, Conductors configuration spacing and clearances, Conductors configuration spacing and
clearances, Span lengths, Overhead line insulators, Insulator materials, Types of insulators,
UNIT– IV
Lightning Arrestors, accessories, Erection of supports, setting of stays, Fixing of cross arms,
Fixing of insulators, Conductor erection, Repairing and jointing of conductor, Dead end clamps,
Positioning of conductors and attachment to insulators Jumpers, Tee-offs, Earthing of transmission
lines. Guarding of overhead lines, Clearances of conductor from ground Spacing between
conductors.
 Design and Estimation of Substation
Introduction, Classification of substation, Indoor substations, Outdoor substations, Selection and
location of site for substation, Main Electrical Connections, Graphical symbols for various types of
UNIT– V
apparatus and circuit elements on substation main connection diagram. Key diagram of typical
substations. Equipment for substation and switchgear installations, Substation auxiliaries supply,
Substation Earthing.
Text Books
1. Electrical Installation Estimating & Costing, J.B.Gupta,VIII Edition S.K.Katria & Sons New
Delhi.
2. Electrical Design Estimating and Costing, K.B.Raina S.K.Bhattacharya, New Age
Reference Books:
1. Electrical Wiring Estimating and Costing, S.L.Uppal, G.C Garg, Khanna Publishers
Course outcomes:
1. Explain general principles of estimation & residential building electrification
2. Preparation of detailed estimates and costing of residential and commercial installation.
3. Design and estimate of overhead transmission & distribution lines, Substations.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Data Mining and Warehousing Code: D000838(022)

Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)

Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objective:
 To understand the overall architecture of a data warehouse.
 The different data mining models and techniques will be discussed in this course.
 Evaluate different models used for OLAP and data pre-processing;
 Design and implement systems for data mining and evaluate the performance of different data mining
algorithms;
 Propose data mining solutions for different applications.
 Differentiate Online Transaction Processing and Online Analytical processing
Overview and Concepts: Need for data warehousing, basic elements of data warehousing, Trends
in data ware housing. Planning and Requirements: Project planning and management, Collecting the
UNIT– I
requirements. Architecture And Infrastructure: Architectural components, Infrastructure and
metadata.
Data Design And Data Representation: Principles of dimensional modeling, Dimensional
UNIT– II
modeling advanced topics, data extraction, transformation and loading, data quality.
Information Access and Delivery: Matching information to classes of users, OLAP in data
UNIT–III warehouse, Data warehousing and the web. Implementation And Maintenance: Physical design
process, data warehouse deployment, growth and maintenance.
Data Mining: Introduction: Basics of data mining, related concepts, Data mining techniques Data
UNIT– IV Mining Algorithms: Classification, Clustering, Association rules. Knowledge Discovery: KDD
Process.
Web Mining: Web Content Mining, Web Structure Mining, Web Usage mining. Advanced Topics:
Spatial mining, Temporal mining. Visualization : Data generalization and summarization-based
characterization, Analytical characterization: analysis of attribute relevance, Mining class
comparisons: Discriminating between different classes, Mining descriptive statistical measures in
UNIT– V
large databases Data Mining Primitives, Languages, and System Architectures: Data mining
Primitives, Query language, Designing GUI based on a data mining query language, Architectures
of data mining systems Application and Trends in Data Mining: Applications, Systems products and
research prototypes, Additional themes in data mining, Trends in data mining
Text Books:
1. Data warehousing- concepts, Techniques, Products and Applications by Prabhu, Prentice hall of India
2. Insight into Data Mining: Theory & Practice by Soman K P, Prentice hall of India.
3. Data Mining Introductory and Advanced Topics by M.H. Dunham, Pearson Education
Reference Books:
1. Data Warehousing Fundamentals by Paulraj Ponniah, John Wiley.
2. Introduction to Data mining with Case Studies by Gupta, PHI.
3. The Data Warehouse Lifecycle toolkit by Ralph Kimball, John Wiley.
4. Introduction to Building the Data warehouse, IBM, PHI.
Course outcomes:
 Design a data warehouse for an organization
 Develop skills to write queries using DMQL
 Extract knowledge using data mining techniques
 Adapt to new data mining tools.
 Explore recent trends in data mining such as web mining, spatial-temporal mining.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of Program: Bachelor of Technology.
Branch: Common to all Branches Semester: VIII
Subject: Fiber Technology Code: D000839(095)
Total Theory Periods: 40 Total Tutorial Periods: Ten (Minimum)
Class Tests: Two (Minimum) Assignments: 2 (Minimum)
ESE Duration: Three Hours Min Marks: 100 Min Marks: 35
Course Objectives
 To Understand various types of fiber
 To know the methods of spinning
 To aware about the sretching of fibers and their modification
 To aware for dying of fibers and its quality control.
Evolution of Manufactured Fiber, Synthetic Fibreand their Clasification, Raw materials
manufacture. DMT, TPA, MEG, caprolactum, adipic acid, hexamethylene diamine, acrylonitrile.
UNIT– I
Molecular size and interaction, Molecular orientation and crystallinity in fibres, Polymers as fibres,
Molecular Weight Differences between Fibresand Plastics, Fibre morphology.
Melt Spinning - melt spinning equipment - high speed spinning - spin drawprocesses –role of critical
parameters in spinning. Solution Spinning:Wet ,dry and Gel spinning and their comparison.
UNIT– II Development of structure and morphology during solution spinning, Spin Finishes - Role of spin
finishes, components, Spin finish application techniques, spin fininsh for staple fiber production and
processing, spin finish for filament yarn. Effect of spin finish on dyeing.
Drawing importance, conditions of drawing - machines for draw warping - texturing - false twist
process -draw texturing- staple fibre production, melt spinning - drawing, heat setting - crimping in
UNIT–III fibre line -Hollow - Low pilling -flame retardant- bicomponentfibres - Mass coloration and their
techniques – mass colouration of Nylon and polyolefins fiber. Dye ability of synthetic fibres-
polyester.
Fiber production for polyethylene terephthalate, Nylon 6 & Nylon 6,6, Acrylic and their properties
UNIT– IV and applications. Fiber modification- physical and chemical techniques, Modification of nylon and
polyester fiber.
Testing of manufactured fibres : Fineness, Fibre crimp, Tensile properties, Evenness testing,
UNIT– V Frictional properties, Shrinkage behavior, Entanglement testing, Energy conservation – pollution
control.
Text Books
1. V. B. Gupta, V. K. Kothari, Manufactured Fibre Technology, Chapman & Hall, 1997
2. Synthetic fibers – Nylon, Polyester, Acrylic, polyolefin Edited by J. E. Mclntyre, CRC Press
3. Wearherhead, R.G., FRP Technology: Fiber Rain Forced Resin Systems, Allied, London.
Reference Books:
1. Fred w. Billmeyer, Text Book of Polymer Science, Wiley India Pvt. Ltd, New Delhi (2015).
2. Fourne, Franz, “Synthetic Fibres, Machines and Equipment, Manufacture, Properties”, Hanser Publishes, 1999.4.
Corbman, Bernard P, “Textiles fibre to fabric”, Sixth Edition, McGraw Hill, 1983.
3. A.A. Vaidya, Production of synthetic fibres, Prentice Hall of India Pvt. Ltd., New Delhi.
Course outcomes:
 The Student will be able to understand the type of different fibers.
 The Student will be able to understand the Spinning.
 The Student will be able to understand the drawing of fiber
 The Student will be able to select the suitable testing parameter to judge the performance of fiber.
 The Student will be able to understand the modification in fiber.