Configuring iTALC management software for use with NComputing systems

Overview iTALC is an open source software application that supports both Windows and Linux-based classrooms and user groups. iTALC stands for Intelligent Teaching And Learning with Computers, and it can enhance virtually any school's or organizations overall computer-based learning environment. iTALC facilitates teacher/student interaction, and allows teachers to easily monitor all student computing activities. If one student needs assistance, the teacher can remotely access that student's desktop and immediately address the problem area. A teacher can broadcast his/her screen to all students, and can also select an individual students screen and broadcast it to all other students in the class. iTALC also allows the teacher to lock student screens to help maintain student attention during instructional periods. Basic instructions for installing iTALC for classrooms comprised of just regular PCs can be found in the iTALC wiki at http://italc.sourceforge.net/wiki/index.php?title=Installation . This document describes additional iTALC installation and configuration details that are specific to an NComputing multi-user environment. The current iTALC user manual can be found at: http://italc.sourceforge.net/italc-manual20070129.pdf . Screen shots showing the master iTALC station in actual NComputing X-series and L-series environments are at the end of this document. Config 1: X-series host PC and iTALC master PC are different (but on same network) In this configuration, you install both the iTALC Master and Client components on the master PC and only install the iTALC Client components on the X-series Host systems (numbered 1,and 2 in the diagram below).

Config 2: X-series host PC and iTALC master PC are the same In this configuration, the iTALC Master and Client components are both installed on one of the X-series Host systems and only the iTALC Client components get installed on the other X-series host (2 below).

Config 3: L-series with all user sessions and the iTALC master running on a single host system. In this configuration, you install both the iTALC Master and Client components onto the classrooms host system.

Config 4: L-series with multiple L-series hosts. All user sessions are controlled by one iTALC master running on one of the L-series hosts. In this configuration, you install both the iTALC Master and Client components onto one classroom host system, and only the Client components are installed on the other L-series host(s). (Multiple iTALC Masters can be in one classroom or on a single subnet, but they must each manage their own set of iTALC Client sessions.)

Miscellaneous installation and configuration tips: Be sure to install iTALC version 1.0.5 or above. The version downloadable from sourceforge.net at the time this was written is 1.0.9 and the NComputing multi-user environment can be used with iTALC clients that are version 1.0.5 and higher. Plan to identify each NComputing access device attached to an individual host PC by a unique iTALC client name. Duplicate names on a single network are fine; these client names only need to be unique for each individual host (i.e., Station-1, Station-2, Station-3, and so on). If you inadvertently duplicate a client name on a single host, iTALC will attempt to communicate via TCP/IP port numbers already in use and will work only intermittently or not at all. If you leave the name blank, iTALC will generate its own name using the hostname:port or IPaddress:port If the iTALC master session will be on the same system as the NComputing TS sessions make sure the iTALC software can see itself in the classroom overview mode. Some iTALC functions such as Remote Logon do not apply to shared computing environments and will not respond from the iTALC console. However, Remote Logoff of sessions is supported. If the iTALC Master software is installed on the host PC either remove the iTALC shortcut from the start menu and place it only on the Administrators desktop, or set the system security policies to ensure that users cannot see the iTALC master console application in their All Programs

Installing iTALC on windows: Store the downloaded iTALC installation package (for example: italc-1.0.9-binwin32.zip ) on the PC youve picked to be the master and unzip the package. Open the folder containing the unzipped files and launch setup.exe to start installing iTALC. Follow the guided steps in the iTALC setup/installation wizard (accept the license agreement to install), and click yes when asked if you want to create a directory that does not yet exist.

When asked to Select components to install select and install BOTH the Client and Master applications on the Master system and install ONLY the Client application on the host PC(s) to which the NComputing access devices will connect.

Creating security keys: Some people get confused over the creation of the security keys, but its actually quite simple. You ONLY create keys on the master computer, and you do it by selecting the Create a new key-pair radio button (see below) and clicking Next on this screen and Finish on the screen that follows it. You actually specify the disk locations for storing the key-pair on the click Finish page. So for the master installation, do not try to fill in this location of exported public key directory field, its only used for the client system installs.

The screen shot below shows the screen that is used to define the directories for storing the created keypair.

The following screen shot shows the import public key of master computer radio button as selected, this is the button that you need to select EVERY time you are installing the iTALC client service on an NComputing access device host system.

Multi-user configuration: Now configure the Clients: (iTALC "clients" are individual NComputing sessions on the host systems) Files italc_config_X.bat, italc_config_L.bat, and italc_device.bat are scripts that need to be executed on the host PC session as each user or station logs-in. These scripts are specifically written to enable iTALC to work properly within NComputing multi-user deployments. Copy the italc_config_X.bat, italc_config_L.bat, and italc_device.bat files to your C:/Program Files/iTALC/ folder. Also, copy the included shortcut named "ica" to the C:/Program Files/iTALC/ folder.

For X-series: Access devices are directly connected to ports on the PCI card(s) installed in the host PC, and the NComputing internal session IDs will always be assigned to the same physical access device.

We recommend you use the following procedure to assign iTALC TCP/IP communications port numbers in the access devices on your X-series host PCs. To do this: Create a new Windows registry entry under: HKEY_Local_Machine/Software/Microsoft/Windows/Current Version/Run and define that registry entrys value to point to the hard drive location of the italc_config_X.bat file (in our example, C:\Program Files\ITALC\italc_config_X.bat)

For L-series: Due to the first come, first served nature of how L-series user sessions are created and assigned, NComputing session IDs are normally attached to different access devices each time a user logs-out and another user logs-in. Although assigning iTALC communication ports with just the type of scripting used with the X-series can be user with the L-series, it will often cause an access device to show up in different positions in the Classroom-Managers navigation screen depending on the order in which students in a classroom log-in to the host PC. However, by using an additional script controlled from the L-device itself we can assign iTALC communication ports based on an ID associated directly with the access device. The steps below describe one method you can use to do this Device-to-Port mapping. Create a new Windows registry entry under: HKEY_Local_Machine/Software/Microsoft/Windows/Current Version/Run and for the L-series define that registry entrys value to point to the hard drive location of the italc_config_L.bat file (in our example, C:\Program Files\ITALC\italc_config_L.bat) Either go to the L-series device itself or use the NComputing Console on the host PC and use Edit Connection Profile to configure the server profile that will be used to connect that L-series device to the classrooms NComputing host PC. Change the radio button from Desktop to Start following program: and fill in the Program and Folder fields to run the batch file italc_deviceL.bat and pass the script a two digit variable that will be used to set the iTALC communications port to match the naming convention youve chosen for that classrooms L-series device. (See example screen shots below.) Program: Italc_device.bat 02 Folder: C:\Program Files\iTALC\

Edit Connection Profile screen at L-series device (accessed via setup at device boot time)

Tips on editing the Windows registry: Editing the Windows registry can most easily be accomplished through the REGEDIT program built into Windows, and it can be accessed by going to start\run\ and typing 'regedit' Due to the nature of the registry, any changes you make do not have to be saved. All registry changes are applied upon restarting the system. This also means there is no 'cancel' button for undoing accidental changes, so make sure you keep careful note of any values you edit. Registry values are stored in keys which appear as folders in the REGEDIT window. When you highlight a key in the left pane, the values stored in it appear in the right pane. To edit a value, right click it and select 'modify.'

To add a new value: Navigate to the key in which you wish to add the value, right click it and select 'new'. Then select the type of value you wish to create. In our case, the type will be a string value. Once you have created the value, name it, and then right click on it to 'modify' its properties (as shown below)

Note that the naming convention for the registry has no spaces.

REBOOT OR RELOG-IN ALL ACCESS DEVICE CLIENTS BEFORE CONFIGURING THE MASTER

Now configure the iTALC Master system (or station): The first time you launch iTALC on the master system, youll get a No configuration file found message.

After you click OK, the iTALC master user interface will open to Overview. Click on the ClassroomManager button, and the Classroom-Manager pane will open.

Right click inside the Classroom-Manager pane (as show below), and create your classroom.

After you have created a classroom, the classroom name shows up in the Classroom-Manager pane. Once again, right click inside the Classroom-Manager pane, and now select (left click) Add computer.

For every station in the classroom, enter the hostname (or IP-address) of the host system that is running the NComputing TS software and combine that name (or address) with the TCP/IP port number that iTALC will use to address each individual user session. Use the following format: COMPUTERNAME:PORT or IPaddress:PORT . (See screen shot examples below.)

In the "Name" field, either leave blank or fill in whatever client name you wish. (This name is only used by iTALC for its internal management of the session connection information, and the only restriction is that no two TS host systems can be named the same.) If you leave the name blank, iTALC will generate its own name using the hostname:port or IPaddress:port

Example Master console screen showing 30 L-series stations running on a single host

Snapshot of Master console screen taken with the iTALC Take a shapshot tool

Example Master console screen showing 7 X-series stations with Master console on a single host

Example Master console screen from an X-series system showing one locked station

Example Master console screen from an X-series system showing all stations locked

Appendix: iTALC multi-user configuration files:

italc_config_X.bat used to launch iTALC client at user login with TCP/IP ports based on X-series session
@echo off IF %SESSIONNAME%==console (GOTO :CONSOLE) IF %SESSIONNAME%==hydrapark#0 (GOTO :STATION2) IF %SESSIONNAME%==hydrapark#1 (GOTO :STATION3) IF %SESSIONNAME%==hydrapark#2 (GOTO :STATION4) IF %SESSIONNAME%==hydrapark#3 (GOTO :STATION5) IF %SESSIONNAME%==hydrapark#4 (GOTO :STATION6) IF %SESSIONNAME%==hydrapark#5 (GOTO :STATION7) IF %SESSIONNAME%==hydrapark#6 (GOTO :STATION8) IF %SESSIONNAME%==hydrapark#7 (GOTO :STATION9) IF %SESSIONNAME%==hydrapark#8 (GOTO :STATION10) IF %SESSIONNAME%==hydrapark#9 (GOTO :STATION11) :: :CONSOLE EXIT :STATION2 "c:\Program EXIT :STATION3 "c:\Program EXIT :STATION4 "c:\Program EXIT :STATION5 "c:\Program EXIT :STATION6 "c:\Program EXIT :STATION7 "c:\Program EXIT :STATION8 "c:\Program EXIT :STATION9 "c:\Program EXIT

Files\iTALC\ica.lnk" -ivsport 5901 -isdport 5801 &

Files\iTALC\ica.lnk" -ivsport 5902 -isdport 5802 &

Files\iTALC\ica.lnk" -ivsport 5903 -isdport 5803 &

Files\iTALC\ica.lnk" -ivsport 5904 -isdport 5804 &

Files\iTALC\ica.lnk" -ivsport 5905 -isdport 5805 &

Files\iTALC\ica.lnk" -ivsport 5906 -isdport 5806 &

Files\iTALC\ica.lnk" -ivsport 5907 -isdport 5807 &

Files\iTALC\ica.lnk" -ivsport 5908 -isdport 5808 &

:STATION10 "c:\Program Files\iTALC\ica.lnk" -ivsport 5909 -isdport 5809 & EXIT :STATION11 "c:\Program Files\iTALC\ica.lnk" -ivsport 5910 -isdport 5810 & EXIT

italc_config_L.bat used to launch iTALC client at user login with TCP/IP ports based on Lseries device
@echo off "%SystemDrive%\Program Files\iTALC\ica.lnk" -ivsport 59%wherefrom% -isdport 58%wherefrom% & EXIT

italc_device.bat launched by L-series device to set session variable identifying that device & then starts Desktop
@echo off set wherefrom=%1 start "" "explorer.exe" exit

Copyright 2003-2009 NComputing, Inc. All rights reserved. NComputing is the property of NComputing. Other trademarks and trade names are the property of their respective owners. Specifications subject to change without notice. Performance may vary, depending on the configuration of the shared computer.