EDITION 2010

Actuators 120°, 135° a. 180°

DR00015U - 04000U

Design: DOUBLE ACTING

Ø Z1 Bottom View ISO 5211
Dimensions
in mm Position of Square
45°
45° Actuator position CLOSE (0°)

Square Single Single

Q W Square Square

B
DOUBLE PARALLEL DIAGONAL
Q1 W1

A C Square drive shaft top

4
for type 4
Air connection VDI/VDE 3845
DR00015U

N
-

P
T Port '4'
DR00030U
E
G

M6x12 D 4
R

4
for type

N
DR00060U
Port '2' -

P
F S DR04000U

T - ISO *ISO ca. Weight

Actuator Type A B C D F G N P R S Z1 Q Q1 W W1
228 Flange in kg
DR00012U 120° 153 1,24
DR00013U 135° 165 69 72 M5x8 80 30 11 20 32 24 1/8“ 42 42 - M5 - F04 1,4
DR00018U 180° 192 1,57
DR00032U 120° 172 2,03
DR00033U 135° 185 85 84,5 M5x8 80 30 11 20 32 24 1/8“ 42 50 70 M6 M8 F05 + F07 2,26
DR00038U 180° 216 2,52
DR00062U 120° 229 3,29
DR00063U 135° 247 102 93 M5x8 80 30 17 20 32 24 1/8“ 42 50 70 M6 M8 F05 + F07 3,82
DR00068U 180° 291 4,28
DR00102U 120° 264 4,55
115 106 M5x8 80 30 17 20 32 24 1/8“ 42 50 70 M6 M8 F05 + F07
DR00108U 180° 335 5,93
DR00152U 120° 292 6,31
DR00153U 135° 316 127 118,5 M5x8 80 30 17 20 32 24 1/4“ 42 70 102 M8 M10 F07 + F10 7,05
DR00158U 180° 372 7,75
DR00222U 120° 345 10,1
DR00223U 135° 374 145 136 M5x8 80 30 27 30 32 24 1/4“ 58 70 102 M8 M10 F07 + F10 11,4
DR00228U 180° 443 12,6
DR00302U 120° 377 12,1
DR00303U 135° 408 157 146,5 M5x8 80 30 27 30 32 24 1/4“ 58 70 102 M8 M10 F07 + F10 13,6
DR00308U 180° 483 15,2
DR00602U 120° 478 23,8
DR00603U 135° 517 196 181 M5x8 80 30 27 30 32 24 1/4“ 67,5 102 125 M10 M12 F10 + F12 26,7
DR00608U 180° 611 29,1
DR01202U 120° 594 43,5
DR01203U 135° 641 245 221,5 M5x8 130 30 36 50 32 24 1/4“ 80 140 - M16 - F14 48,2
DR01208U 180° 754 52,6
DR02002U 120° / /
298,5 262 M6X10 130 30 36 50 45 40 3/8“ 115 165 - M20 - F16
DR02008U 180° 867 106
DR03002U 120° / /
330 330 M6X10 130 30 36 50 45 40 1/2“ 115 165 - M20 - F16
DR03008U 180° 1023 127
DR04002U 120° / /
383 371 M6X10 130 30 36 50 45 40 1/2“ 115 165 - M20 - F16
DR04008U 180° / /
Dimensions in mm; *other connections available
Specification:
Max. supply pressure: 8 bar Torque: With the same operating pressure the torque is
Operating pressure: 2,5 - 8 bar equivalent to the standard actuator. See data sheet
other dimensions: see standard data sheet of standard actuator.
Material: see data sheet 120°-135°-180° actuators Working Medium: refer to AIR TORQUE manual instruction.

Modifications reserved. Date 10.2011.

No guarantee for accuracy. 120°/135°/180°
Older data sheets are invalid. 0601e
 EDITION 2010
Actuators 120°, 135° a. 180°
DR00015U - 04000U

Design: DOUBLE ACTING

15 01 08 06 21 39 19.1 19.0 02 04 03 11 19.5 19.6 18 10

19

30 14 16 60 07 20 43 65 50 41 13 40 05 09

Part Spare
Quantity / Note Description Standard Material (A) (B)
No. Parts
01 1 Octi-Cam (Stop arrangement) Carbon Steel, zinc coated
02 2 Stop Cap Screw Stainless Steel
03 2 Washer Stainless Steel
04 2 Nut (Stop screw) Stainless Steel
05 ◯ 2 Bearing (Piston back) PA46
06 ◯ 1 Bearing (Pinion top) High-grade polymers
07 ◯ 1 Bearing (Pinion bottom) High-grade polymers
08 ◯ 2 3 pcs. for model DR00600U Thrust Bearing (Pinion) PA46
09 ◯ ☐ 2 Plug Silicone
10 1 Thrust Washer (Pinion) Stainless Steel
11 ◯ ☐ 2 O-Ring (Stop screw) M-NBR
13 8 Cap Screw (End cap) Edelstahl
14 ◯ ☐ 2 O-Ring (End cap) M-NBR
15 ◯ 2 Bearing (Piston head) POM
16 ◯ ☐ 2 O-Ring (Piston) M-NBR
18 1 Spring Clip (Pinion) Spring Steel, ENP
19 1 for types DR00015U - 00030U Position Indicator PA66+GF+(CB)
19.0 1 Graduated Ring PA66+GF+CB
19.1 1 for types DR00060U - 04000U Position Indicator PA66+GF+(CB)
19.5 1 Top Adaptor Extruded Aluminium alloy, anodized
19.6 2 Hex. Socket Screw (Top Adaptor) Stainless Steel
20 ◯ ☐ 1 O-Ring (Pinion bottom) M-NBR
21 ◯ ☐ 1 O-Ring (Pinion top) M-NBR
30 2 End Cap Pressure Die Cast Aluminium alloy, anod. a. coated
39 1 Cap Screw (Indicator) PA66+GF+CB
40 2 Piston Pressure Die Cast Aluminium alloy, anodized
41 1 Identification Label Polyester-Silver
43 1 Spigot (only on request) Extruded Aluminium alloy, anodized
50 1 Body Extruded Aluminium alloy, coated
60 1 Drive Shaft Steel, ENP
60.1 1 only for protection „E“ a. „EC“ Integral Drive Shaft Stainless Steel, ENP
65 1 Plastic Insert Modified PA66

◯ included in spare part kit ☐ included in O-Ring spare part kit

Note: (A) For detail of material end coating specifications refer to the catalogue.
(B) For different soft parts material depending on operation temperature range refer to the catalogue.

Modifications reserved. Date 10.2011.

No guarantee for accuracy. 120°/135°/180°
Older data sheets are invalid. 0602e