Astec DC-DC Converter
Astec DC-DC Converter
Astec DC-DC Converter
Drawings 50.80
(2.00)
2.54 45.72 5.08
(0.10) (1.80) (0.20)
5
17.78
10.16
(0.70)
40.64 (0.40)
(1.60) 6
1 10.16
5.08 (0.20)
(0.40)
2
10.16 7
(0.40) 3 10.16
4 (0.40)
8
Bottom View
10.16
(0.40)
0.15
(3.81) min.
1.01 (0.040)
dia. typ.
1 +V in +V in 8 20K R R
2 - V in - V in
3 (no pin) (no pin) 7 8 8
4 Enable Enable Adj. Trim Trim Down Trim Up
5 (no pin) + V out Dual Output Models
6 +V out Output Common
5 5 7
7 Output Common - V out
8 Trim Trim 8 20K R R
7 8 8
Adj. Trim Trim Down Trim Up
RS Components UK,
PO Box 99, Corby, Northants. NN17 9RS,United Kingdom
Tel +44 (0)1536 201234 Fax +44 (0)1536 405678
Radiospares Composants,
Rue Norman King, 60031 Beauvais Cedex, France
Supplied by Tel +33 (0)344 101515 Fax +33 (0)344 101600
Astec Standard Power Europe RS Components GmbH,
Hessenring 13b, Postfach 1365, 64546 Mörfelden-Walldorf, Germany
Tel +49 (0)6105 401234 Fax +49 (0)6105 401100
Environmental Safety
Operating Temperature range :- -40° to +60°C TUV EN60950 (IEC950)
(linearly derate to 0W at 105°C) UL UL1950 recognised
CSA CSA 22.2-234
Storage temperature :- -55° to +125°C
Notes
1 Requires 2.2 µF/100V film capacitor (ITW/ Paktron part 225K100RA4 or equiv.) across input.
2 Measured with 0.1µF ceramic capacitor across each output.
3 Telecom version (048L models) feature thermal shutdown and undervoltage lockout to meet ETS 300 132-2
para 4.6
4 All specifications are typical at nominal line, full load, and 25° C unless otherwise noted.
5 Specification subject to change without notice.
6 All dimensions are in mm and (inches).
7 Enable (Pin 4) Referenced to -Vin (Pin 2). TTL and CMOS compatible signal.
ON - TTL high (>2.4 VDC) or open
OFF - TTL low (<0.8 VDC) or jumper
Open collector compatible.
8 Converter is fully encapsulated inside a six sided shielded case which is connected to
- Vin (Pin2) for 024L models and +Vin (Pin1) for 046L & 048L models
9 External output trimming: Outputs may be externally trimmed +10%, -10% max.
10 Colour - black
Weight - 56g