This document provides technical specifications for an electric actuator model SA15B63-e-pac manufactured by Auma India. Key details include:
1) It has a torque range of 150Nm and maximum speed of 63rpm for ON/OFF service.
2) The enclosure is rated IP68 and is designed to operate in ambient temperatures from -20 to +80 degrees Celsius.
3) It has position limit switches with 2NO+2NC contacts and torque switches with 2NO+2NC contacts rated for 5A/0.46A at 250V AC/DC.
This document provides technical specifications for an electric actuator model SA15B63-e-pac manufactured by Auma India. Key details include:
1) It has a torque range of 150Nm and maximum speed of 63rpm for ON/OFF service.
2) The enclosure is rated IP68 and is designed to operate in ambient temperatures from -20 to +80 degrees Celsius.
3) It has position limit switches with 2NO+2NC contacts and torque switches with 2NO+2NC contacts rated for 5A/0.46A at 250V AC/DC.
This document provides technical specifications for an electric actuator model SA15B63-e-pac manufactured by Auma India. Key details include:
1) It has a torque range of 150Nm and maximum speed of 63rpm for ON/OFF service.
2) The enclosure is rated IP68 and is designed to operate in ambient temperatures from -20 to +80 degrees Celsius.
3) It has position limit switches with 2NO+2NC contacts and torque switches with 2NO+2NC contacts rated for 5A/0.46A at 250V AC/DC.
This document provides technical specifications for an electric actuator model SA15B63-e-pac manufactured by Auma India. Key details include:
1) It has a torque range of 150Nm and maximum speed of 63rpm for ON/OFF service.
2) The enclosure is rated IP68 and is designed to operate in ambient temperatures from -20 to +80 degrees Celsius.
3) It has position limit switches with 2NO+2NC contacts and torque switches with 2NO+2NC contacts rated for 5A/0.46A at 250V AC/DC.
Your reference & Date : Our reference & Date : Project :
Description Unit Data
Sl no. 01 Manufacturer Auma India 02 Model SA15B63,e-pac 03 Torque range & Speed Nm & rpm 150 & 63,on/off 04 Type of service ON/OFF(60Starts /Stop Hour) 05 Enclosure IP68 0 06 Admissible ambient temperature C -20 to +80 07 Cable Entries Single compression Not in scope 2 X M20 X 1.5 & 2 X M25 X 1.5 08 Position limit switches 2 nos. 2NO+2NC contacts 09 Torque switches 2 nos. 2NO+2NC contacts 10 Rating of switches 5A/0.46A at 250V AC/DC 11 Thermostat Provided 12 Lubrication Grease EP0 Servo gem 13 Motor nominal output kW 1.1 14 Duty S2-15 Min 15 Rated voltage V 415 16 Rated frequency Hz 50 17 No. of phases 3 18 Frame size 71 19 Admissible voltage fluctuation % +/-10 20 Admissible frequency fluctuation % 5 21 Admissible voltage & frequency fluctuation % 10 [Absolute] 22 Full load current A 2.9 23 Starting Current A 16.0 24 Full load speed rpm 2800 25 Power factor 0.72 26 Insulation class Class “F” Limited to Class “B” 27 Full load efficiency % 75 Integral(RDOL) Starter with Single phase protection , jammed valve protection, Monitor relay 28 Provided for collective fault ,Fault indication with LED’s, L/R/S Selector switch , Push Botton for close/open 29 Space Heater Provided 30 Motor reference standard IS325/IEC 60034 31 Painting Smoke Grey Size of power cable & Control cable from 4sqmm & 2.5sqmm 32 customer 33 Wiring Terminal Plan 3WDP-E-PAC-C/1.1-31383