Hydraulic Seat Puller Kit
SWTM1700 Hydraulic Seat Puller Kit
Description
The Southwest Oilfield Products, Inc. SWTM1700 Hydraulic Seat Puller System is a complete kit designed
for the removal of valve seats in both mud pumps and frac pumps. This system includes all of the parts
necessary for operation, less the puller head; Southwest has an assortment of puller heads designed for
most popular pumps and valves (see the puller head ordering sheet).
Operation
The system works using hydraulic pressure to energize a pancake- style cylinder which pulls a threaded
puller stem attached to the appropriate puller head. This system comes with an “H”-style jack base
plate to span even the largest of fluid cylinder bores.
Features
Threaded Screw size – 2” diameter, 4.5 threads per inch, 36” overall length, rated 262,500 lbs @ 7,900
PSI hand pump pressure. Do not exceed 7,900 PSI when using the screw provided in this kit.
Hydraulic hand pump – 10,000 PSI rating
Pancake cylinder – 165 tons @ 10,000 PSI
15,000 PSI Gauge
Southwest Oilfield Products 10340 Wallisville Road, Houston, TX 77013 Office 713-675-7541
8 7 6 5 4 3 2 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 SWTM1717 JACK REPAIR KIT (NOT SHOWN) 1
2 SWTM1718 PUMP REPAIR KIT (NOT SHOWN) 1
3 SWTM1704 JACK BASE PLATE 1
4 SWTM1702 2" CENTER STEM, 36" LONG 1
5 SWTM1703 STEM NUT 1
D D
6 SWTM1708 HYDRAULIC HAND PUMP 1
7 SWTM1709 GAGE ADAPTER 1
8 SWTM1712 GAGE 1
4 9 SWTM1711 FEMALE HALF HYDRAULIC COUPLING 1
10 SWTM1711 MALE HALF HYDRAULIC COUPLING 1
11 SWTM1707 HYDRAULIC HOSE 1
12 SWTM1705 2" CENTER STEM BUSHING 1
13 SWTM1701 HYDRAULIC JACK 1
5
13 12 8
10
C C
11
B B
3 6
9 7
UNLESS OTHERWISE SPECIFIED: DRAWN DATE SOUTHWEST OILFIELD PRODUCTS
DIMENSIONS ARE IN INCHES
TOLERANCES: 10340 WALLISVILLE ROAD, HOUSTON,TX 77013
FRACTIONAL 1/64 BH 02/06/2013
ANGULAR: 0.5° TITLE:
DECIMAL +.005 / -.000
A ALL FILLETS & RADII - 1/16 MAX CHECKED DATE SWTM1700 HYDRAULIC SEAT A
CHAMFERS 1/16 X 45° MAX
SURFACE FINISH 125 RMS MAX PULLER ASSEMBLY WITH 2" X 36"
CONCENTRICITY NOT TO EXCEED.005 T.I.R. EF 02/06/2013 CENTER STEM
BREAK SHARP CORNERS 1/32 X 45° MAX
MATERIAL
THE INFORMATION CONTAINED IN THIS
N/A DRAWING IS THE SOLE PROPERTY OF SIZE DWG. NO. REV
B
SOUTHWEST OILFIELD PRODUCTS. ANY
REPRODUCTION IN PART OR AS A WHOLE
B
HEAT TREAT
WITHOUT THE WRITTEN PERMISSION OF SWTM1700
N/A SOUTHWEST OILFIELD PRODUCTS IS
PROHIBITED. SHEET 1 OF 1
8 7 6 5 4 3 2 1
