LigoPTP 5-N/ 5-23 RapidFire

Outdoor Wireless Point-to-Point Bridge

COPYRIGHT ©2021 LIGOWAVE

COPYRIGHT ©2021 LIGOWAVE
 Outstanding Capacity
RapidFire delivers an extremely high 700Mbps throughput via its unique and powerful RF design that supports up to
256-QAM modulation and 31dBi output power. Our proprietary W-Jet V protocol, specifically engineered for high
performing PTP scenarios, minimizes interferences even across long distances and stabilizes latency within 2-4 ms.

45°

Professional Design
In addition to achieving maximum performance, LigoWave focuses on delivering flexibility and ease-of-use in our
RapidFire series. The robust mounting bracket enables rapid deployment of the links and ensures survivability during
high wind-load. The integrated antenna possesses a 45° rotation option which increases installation flexibility; especially
advantageous in noisy spectrum areas. A GORE© membrane vent allows fast pressure equalization of the IP-67 rated
cast aluminum enclosure to prevent condensation and to ensure seal performance . A detachable handle eases
transporting the devices up towers and over rough terrains. Newly designed RGB LEDs indicate different device statuses
and signal levels (in 1dBm steps) when aligning the antenna.

Powerful All-in-One Hardware Platform

LigoWave RapidFire delivers powerful performance with its new 1.2GHz CPU dedicated for data processing and high
(200,000) packet per second delivery. Equipped with two Gigabit Ethernet ports, one with PoE passthrough, the unit is ideal
for high-security video surveillance scenarios. RapidFire incorporates integrated surge and ESD protection according to IEC
standards and passes Class 4 requirements.

COPYRIGHT ©2021 LIGOWAVE

 Wireless Configuration Interface
An internal 2.4GHz radio allows access into the Rapidfire GUI by wireless connection with any WIFI equipped device. This
feature expedites the installation of links and alleviates the problem of troubleshooting in difficult-to-reach locations. Tests
prove accessibility even when mounted on top of a 10-story building while standing 20 meters (65 ft) away!

Powerful OS
The LigoPTP operating system ensures easy and rapid deployment of point-to-point links with stable, fast performance.
An intuitive and responsive user interface adjusts the layout based on the size of your screen. Essential tools including
Setup Wizard, link test, antenna alignment, spectrum analyzer, and site survey are included to make set-up and
troubleshooting more efficient. Automatic mechanisms such as auto-channel and automatic transmit power control
optimize the link for maximum performance even in areas with high interference.

COPYRIGHT ©2021 LIGOWAVE

 Setup Wizard Spectrum Analyzer Single Side Configuration
A link setup wizard guides the installer The integrated spectrum analyzer LigoPTP RapidFire simplifies link
through the important steps of the demonstrates the noise floor in order to configuration by supporting single
set-up process. find the optimum frequency. side configuration as parameters are
automatically applied to slave units once
set on the master side.

Easy Pre-Configuration
Multiple options to pre-configure LigoPTP RapidFire devices are displayed in a scheme below. Devices can be connected with
each other using wired or wireless connectivity. End-user device can also connect to the master device using 2.4GHz access
radio or using wire to the Ethernet port of the master device. LigoPTP RapidFire devices can be discovered using bonjour and
SSDP protocols as well.

Wireless

Wired
MASTER SLAVE

ETH 1 ETH 1

COPYRIGHT ©2021 LIGOWAVE

 802.3af/at Inserter

DC input connector

DIN rail mounting

Grounding pin

Electrical specifications Physical specifications

DC input voltage range 44.0–57.0V DC input
IEEE 802.3af/at compliant POE output Data input jack RJ45
Output power up to 28W Data + Power output jack RJ45
Power output RJ45 pins 1,2,4,5 (+) and 3,6,7,8 (-) Dimensions 117×87×34mm
Data rate 10/100/1000Mbps Weight 270g
Surge protection 2kV line to line, Operating temperature –40 to +65C
6kV line to ground (output port) UTP/FTP cable length 100m total
(from switch to the device)

COPYRIGHT ©2021 LIGOWAVE

Radio
Wireless protocol W-Jet V
Radio mode MIMO 2×2
Frequency range 4.900 - 6.100GHz (FCC: 4.940 - 4.990GHz, 5.150-5.250GHz, 5.725-5.850GHz)
Channel size 5, 10, 20, 40, 80MHz
Modulation schemes OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
Data rates @ 80MHz 866, 780, 650, 585, 520, 390, 260, 195, 130, 65Mbps
Duplexing scheme TDD
Error correction BCC, LDPC
Automatic Channel Selection DFS Compatability
Automatic TPC Supported

Modulation, Mbps 866 780 650 585 520 390 260 195 130 65

TX Power, dBm 25 26 26 27 27 28 29 30 30 31

Receive sensitivity, dBm -71 -73 -77 -79 -80 -84 -87 -92 -94 -97

Antenna
LigoPTP 5-23 RapidFire Integrated directional dual-pol 23dBi panel
LigoPTP 5-N RapidFire 2 N-type connectors

Wired
First Interface 10/100/1000 Base-T with PoE IN (RJ45)
Second Interface 10/100/1000 Base-T with PoE OUT (RJ45)

Physical
Dimensions without mount:
LigoPTP 5-23 RapidFire Length 379mm (14.9‘’), width 387mm (15.2‘’), height 51mm (2‘’)
LigoPTP 5-N RapidFire Length 399mm (15.7‘’), width 174mm (6.8‘’), height 47mm (1.8‘’)

Mount length till pole 124mm (4.8‘’)

Weight including mount:
LigoPTP 5-23 RapidFire 3.9kg (8.5lb)
LigoPTP 5-N RapidFire 2.9kg (6.3lb)

Power
Power input method, voltage PoE 802.3at, isolated 42 - 57VDC
Power consumption (max) 8.6W
Power output method, voltage PoE 802.3af, 48VDC, 12.95W maximum
PoE inserter and AC/DC adapter are included

Environmental
Operating temperature –40°C (–40F) ~ +65°C (+149F)
Humidity 0 ~ 95 % (non-condensing)

COPYRIGHT ©2021 LIGOWAVE

 Software features
• Wizard for fast link setup
• Centralized control from master: A) Common wireless link parameters; B) Individual slave parameters
• Smart Auto-channel
• Robust data security
• QoS with hardware acceleration
• Spectrum analyzer
• Wireless signal and device state indication on RGB LEDs
• Dual firmware image

Management
Dedicated 2.4GHz radio for management
System monitoring STP/SNMP (V1), GUI/HTTP(S), Shell/SSH and Infinity Controller
System configuration GUI/HTTP(S)

Regulatory
Certification FCC/IC/CE

Antenna specifications

V Pol H Pol
0 0 0 0
30 330 30 330 30 330 30 330

60 300 60 300 60 300 60 300

90 270 90 270 90 270 90 270

120 240 120 240 120 240 120 240

150 210 150 210 150 210 150 210

180 180 180 180

Azimuth Elevation Azimuth Elevation

Internal antenna
Frequency range 4.9 - 5.9GHz

Gain 23dBi

Polarization Dual linear

Cross-pol Isolation 27dBi

VSWR 1.5:1

Azimuth beamwidth (H pol) 6°

Azimuth beamwidth (V pol) 7°

Elevation beamwidth 9°

LigoPTP 5-N/ 5-23 RapidFire

Copyright © 2021 LigoWave. All rights reserved. LigoWave, the LigoWave logo, are trademarks of LigoWave. All other company and product names may be trademarks of
their respective companies. While every effort is made to ensure the information given is accurate, LigoWave does not accept liability for any errors or mistakes which may
arise. Specifications and other information in this document may be subject to change without notice. To learn more about LigoWave products, visit www.ligowave.com.
COPYRIGHT ©2021 LIGOWAVE