0% found this document useful (0 votes)
127 views4 pages

Solar Permit Package Sample

1. The solar system includes 20 REC Solar panels totaling 4.6 kW installed on a house with a sloped roof. 2. The system is grounded using the WEEB grounding system and includes a combiner box, DC disconnect, inverter, and connections to the main electrical panel in the basement. 3. A site plan shows the location of new and existing electrical equipment and outlines the general project scope.

Uploaded by

Peter yao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
127 views4 pages

Solar Permit Package Sample

1. The solar system includes 20 REC Solar panels totaling 4.6 kW installed on a house with a sloped roof. 2. The system is grounded using the WEEB grounding system and includes a combiner box, DC disconnect, inverter, and connections to the main electrical panel in the basement. 3. A site plan shows the location of new and existing electrical equipment and outlines the general project scope.

Uploaded by

Peter yao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Milky Way N

Driveway 11' to PL
Property Line

Main Electrical Panel (E)


8' to PL
5' to General Project Description:
PL

1. The system is 4.600 kW STC


2. Modules: 20 @ REC Solar REC230PE-US 230 Watt Panels
3. Inverter: KACO Blueplanet 5002x (240V)
4. No Batteries or UPS
Combiner Box (N) 3' 5.
6. 2 story house
6'-11" 7. 2" x 8" Rafters at 16" OC with 5/8" OSB sheeting
EMT Conduit on Roof (N)
8. 5/16 x 3.5" lag bolts @ 64"
9. Standard components include: racking and mounting
Solar Array (N) components, wiring, conduit, over-current protection,
20 @ REC Solar
DC Disconnect (N) roofing sealant, flashings, as needed
in Basement REC 230 PE-US
Inverter (N) All Black Panels 10. All electrical equipment will be labeled with warning labels
in Basement (see page 4)
AC Load Center
in Basement (E) 11. All outdoor wiring will be weather rated
7'-6"
12. All module frames, equipment and conductor enclosures will be
grounded
13. The system is grounded using the WEEB grounding system
14. System and racking built to 2010 CBC/CRC
Property Line
23' to PL
Legend:
Site Plan
(E) Existing
(N) New Jokeland, CA 94600
PL Property Line Contractor: Sun Solar 510-282-0840
CA Lic#888888

25 Milky Way
DISCLAIMER: If any Errors, Discrepancies or Omissions appear in these drawings, specifications or other contract documents; The Owner or General Contractor shall notify the Designer, in writing,
Customer: Dear Customer Jokeland, CA 94600
of such error or omission. In the event that the Owner or General Contractor falls to give such notice, before construction and/or fabrication of the work, the Owner or General Contractor will be 510-000-0000
held responsible to the result of any errors, discrepancies or omissions and the cost of rectifying them.
Date: 12/06/12 Drafter: Gyuri K Scale: 3/32" = 1' Sheet 1 of 4
(E) 2" x 8" Rafters @ 16" OC
With 5/8" OSB sheeting

ne l
Pa
(N) 20 @ REC Solar REC230 PE-US Panels
3'-2" S o lar
66.55" x 39.02" x 1.69"
R E C SnapNrack flashed L foot

23' (N) attachment with 5/16-3 1/2"


lag bolts @ 64" OC
5'-7"

5'-7" 1"
22
f t e r
5'-7"
x 8 Ra
2
3'-2"
(E) 2x4 Bracing @ 16" OC
(E)

6'-5" 6'-5" 6'-5"

19'-3" Attachment Detail Scale 3" = 1'

Roof Section Scale 3/8" = 1"


Structural Drawings
Legend:
Jokeland, CA 94600

(E) Existing
Contractor: Sun Solar 510-282-0840
CA Lic#888888
(N) New 25 Milky Way
DISCLAIMER: If any Errors, Discrepancies or Omissions appear in these drawings, specifications or other contract documents; The Owner or General Contractor shall notify the Designer, in writing,
Customer: Dear Customer Jokeland, CA 94600
of such error or omission. In the event that the Owner or General Contractor falls to give such notice, before construction and/or fabrication of the work, the Owner or General Contractor will be 510-000-0000
held responsible to the result of any errors, discrepancies or omissions and the cost of rectifying them.
Date: 12/06/12 Drafter: Gyuri K Scale: Sheet 2 of 4
PV Array (N) Combiner Box(N) DC Disconnect (N) Inverter (N) AC Load Center (E) Main Service
2 Strings of 10 Modules Midnite Solar MNPV3 Square D HU361RB KACO Blueplanet 125 Amp Rated Load Center Panel (E)
REC Solar REC230PE-US Modules 2 @ 15 Amp Fused Inputs 3P30A 5002x (240V) (Murray) 125 Amp Rated
Total Output: 4,600 Watts STC NEMA 3R 600 VDC 5000 Watt
600 VDC, 60 A Rated NEMA 3R

Utility Meter
(E) Main Breaker
2P100Amp
10

DC
Utility Grid
AC 120/240V
Single Phase

10
(N) PV Breaker
2P30Amp

Panel Specs: Isc @ 156% = 12.94A Isc @ 156% = 25.89 A Ioperating @ 125% = 26 A (20.83 A x 125%)
Max system V @ 113% record low temp Max System V @ 113% record low temp (2) # 10 THHN/THWN-2
factor = 420 VDC factor= 420 VDC (1) # 10 THHN/THWN-2 Neutral
Pmax: 230 W (4) #12 AWG USE-2 (2) #10 THHN/THWN-2 (1) # 8 THHN/THWN-2 EGC/GEC
Imp: 7.8 A (1) #12 THHN/THWN-2 EGC (1) #10 THHN/THWN-2 EGC
Vmp: 29.4 V
Voc: 37.1 V
Isc: 8.3 A

Legend:
Single Line Notes: (E) Existing
(N) New
1. The Inverter grounding electrode conductor is connected directly to the building grounding
2. electrode or irreversibly connected to the building GEC.
3. All wire sizes are as indicated or larger.
4. Wire sizes meet the criteria of 125% continuous use factor.
5. All equipment is bonded by mechanical means or by a grounding conductor.
6. All modules are grounded mechanically using WEEBS.
7. The system is grounded at the neutral buss in the main electrical panel.
8. The system is grid - intertie only, has no batteries or UPS.
1 -Line Drawing
Jokeland, CA 94600
Contractor: Sun Solar 510-282-0840
CA Lic#888888

25 Milky Way
DISCLAIMER: If any Errors, Discrepancies or Omissions appear in these drawings, specifications or other contract documents; The Owner or General Contractor shall notify the Designer, in writing,
Customer: Dear Customer Jokeland, CA 94600
of such error or omission. In the event that the Owner or General Contractor falls to give such notice, before construction and/or fabrication of the work, the Owner or General Contractor will be 510-000-0000
held responsible to the result of any errors, discrepancies or omissions and the cost of rectifying them.
Date: 12/06/12 Drafter: Gyuri K Scale: Sheet 3 of 4
NEC 690.5(c) NEC 690.54 NEC 690.53 & NEC 690.14(c)
PLACE THIS LABEL ON INVERTER(S) OR NEAR GROUND-FAULT PLACE THIS LABEL AT "INTERACTIVE POINT OF PLACE THIS LABEL ON ALL PHOTOVOLTAIC DC
INDICATOR (ON INVERTER(S) U.O.N.) INTERCONNECTION" (AT MAIN SERVICE PANEL AND DISCONNECTING MEANS (ON INVERTER IF INTEGRATED DC
SUBPANEL IF APPLICABLE) DISCONNECTS AND AT A SEPARATE DC DISCONNECT IF
WARNING INTERACTIVE PHOTOVOLTAIC POWER SOURCE
APPLICABLE)
ELECTRIC SHOCK HAZARD PHOTOVOLTAIC SYSTEM DISCONNECT:
IF A GROUND FAULT IS INDICATED, RATED AC OUTPUT CURRENT: 20.83A
NORMALLY GROUNDED CONDUCTORS NOMINAL OPERATING AC VOLTAGE: 240V RATED MAXIMUM POWER POINT CURRENT (IMP): 15.6A
MAY BE UNGROUNDED AND RATED MAXIMUM POWER POINT VOLTAGE (VMP): 294V
ENERGIZED. MAXIMUM SYSTEM VOLTAGE (VOC): 420V
SHORT CIRCUIT CURRENT (ISC): 16.6A
ELECTRICAL PANEL
NEC 690.17
PLACE THIS LABEL ON ALL DISCONNECTING MEANS CAUTION
WHERE ENERGIZED IN AN OPEN POSITION DUAL POWER SUPPLY
WARNING
ELECTRIC SHOCK HAZARD CAUTION
DO NOT TOUCH TERMINALS SOLAR PV SYSTEM INSTALLED. WHEN POWER
TERMINALS ON BOTH THE LINE AND LOAD SIDE DISCONNECTED, SOLAR PANELS AND WIRING MAY
MAY BE ENERGIZED IN THE OPEN POSITION REMAIN ENERGIZED DURING DAYLIGHT HOURS. ALL LABELS AND AND MARKINGS SHALL BE ATTACHED
ACCORDING TO REQUIREMENTS BY NEC AND THE LOCAL AHJ.
THE AHJ MAY HAVE SPECIAL LABEL REQUIREMENTS BEYOND
NEC 690.64(B)(7) EXTERIOR / INTERIOR CONDUIT THE SCOPE OF THIS DOCUMENT. THIS MAY ENCOMPASS
PLACE THIS LABEL AT P.O.C. TO SERVICE DISTRIBUTION LANGUAGE INCLUDING, BUT NOT LIMITED TO, THAT FOUND IN
EQUIPMENT (I.E. MAIN PANEL ( AND SUBPANEL IF APPLICABLE)) CAUTION NEC ARTICLES 690.5(C), 690.14(C)(2), 690.17, 690.53, 690.53(F),
THIS LABEL IS ONLY NECESSARY WHEN BREAKERS FEEDING SOLAR PV WIRING MAY REMAIN ENERGIZED AFTER 690.54, 690.64(B)(7) AND 705.10.
PANEL EXCEEDS 100% OF BUSS RATING DISCONNECTION DURING DAYLIGHT HOURS.

WARNING SIGNAGE REQUIREMENTS FOR SOLAR PV SYSTEMS:


IVERTER OUTPUT CONNECTION TWO FORMS OF SIGNAGE ARE REQUIRED FOR SOLAR PV
INVERTER SYSTEMS. PERMANENTLY AFFIXED LABELS SHOULD HAVE
DO NOT RELOCATE THIS
OVERCURRENT DEVICE REFLECTIVE RED BACKGROUND WITH WHITE LETTERING.
PHOTOVOLTAIC INVERTER PRINTED MATERIAL SHOULD RESIST FADING.

DC DISCONNECT(S) AC DISCONNECT

PHOTOVOLTAIC DC DISCONNECT PHOTOVOLTAIC AC DISCONNECT Labels


Jokeland, CA 94600
Contractor: Sun Solar 510-282-0840
CA Lic#888888

25 Milky Way
DISCLAIMER: If any Errors, Discrepancies or Omissions appear in these drawings, specifications or other contract documents; The Owner or General Contractor shall notify the Designer, in writing,
Customer: Dear Customer Jokeland, CA 94600
of such error or omission. In the event that the Owner or General Contractor falls to give such notice, before construction and/or fabrication of the work, the Owner or General Contractor will be 510-000-0000
held responsible to the result of any errors, discrepancies or omissions and the cost of rectifying them.
Date: 12/06/12 Drafter: Gyuri K Scale: Sheet 4 of 4

You might also like