0% found this document useful (0 votes)
82 views1 page

PI3USB30532ZLE

The document describes the PI3USB30532, a 6:4 matrix switch from Diodes Incorporated that multiplexes USB 3.0, DP1.2, and AUX signals through a USB Type-C connector. It can switch one lane of USB 3.0, one USB 3.0 lane and two DP1.2 channels, or four DP1.2 channels. It offers low insertion loss and return loss for high-speed signal integrity and supports I2C or pin control configuration. Applications include routing various digital interface signals through USB Type-C ports in devices such as notebooks, tablets, docks and monitors.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
82 views1 page

PI3USB30532ZLE

The document describes the PI3USB30532, a 6:4 matrix switch from Diodes Incorporated that multiplexes USB 3.0, DP1.2, and AUX signals through a USB Type-C connector. It can switch one lane of USB 3.0, one USB 3.0 lane and two DP1.2 channels, or four DP1.2 channels. It offers low insertion loss and return loss for high-speed signal integrity and supports I2C or pin control configuration. Applications include routing various digital interface signals through USB Type-C ports in devices such as notebooks, tablets, docks and monitors.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

A product Line of

Diodes Incorporated

PRODUCT BRIEF

PI3USB30532
3.3V, USB3.0/DP1.2 6:4 Matrix Switch

Description Features
Diodes Incorporated PI3USB30532 is a 6:4 differential channel ¼¼ 6 Differential Channel to 2/4 Differential Channel Matrix Switch
bi-directional matrix switch solution for switching USB3.0 and/or ¼¼ USB 3.0 5Gb/s Super Speed and DP 1.2 5.4Gb/s switching
DP1.2 signals through USB3.0 Type-C connector.
¼¼to USB Type-C connector
It multiplexes either 1 lane of USB3.0, 1 lane of USB3.0 and 2 channels
of DP1.2 or 4 channels of DP1.2 to the USB Type C connector. ¼¼ Supports either pin control or I2C control to configure the mux
In addition, AUX± channels are also multiplexed to the Type C ¼¼ Low insertion loss: -1.2dB @ 5Gb/s
connector. PI3USB30532 offers excellent signal integrity for
¼¼ Return loss: -21dB @ 5Gb/s
high-speed signals and low power dissipation. Insertion loss is
-1.2dB and return loss is -21dB at 5Gb/s speed of USB3.0. ¼¼ -3dB Bandwidth : 6GHz

Applications ¼¼ Multiplexes one of the following to USB Type C connector:

ÎÎRouting USB3.0 SuperSpeed and DP1.2 signals through the àà USB3.0 signal only
USB Type C Connector. àà One lane of USB3.0 signal and 2 channels of DP1.2
ÎÎApplications include Ultrabook, 2 in 1 Notebook, Tablet, Mobile or 4-channels of DP1.2 signal.
Workstation, All In One PC, Monitor, Docking Station, Phone ¼¼With DP1.2 operating, AUX+ and AUX- are muxed to SBU pins.
Max swing on SBU pins are from -0.35V to 3.95V
Block Diagram
¼¼ 3.0V to 3.6V Power Supply.
CONF2 CONF1 CONF0
¼¼Industrial Temperature Range: -40oC to 85oC
Mode ¼¼Packaging (Pb-free & Green):
Conf2/SDA I2C
Register &
Conf1/SCL
Conf0/A1 Control Control Decode – 40- contact, TQFN(3 x6mm)
A0

DP2+ Application
DP2-

D0 -D3
TX1+/RX1+ AUXHPD+ PI2EQXDP1201 DB
TX1-/RX1- Tx1, Rx1 AUXHPD- 4-Channel
TX+/RX+
DP1.2 ReDriver
100KΩ 100KΩ

TX-/RX-
Tx2, Rx2 PI3USB30532
Type C Crossbar USB 3.0
Tx-Rx controller
SBU1, SBU2 Crossbar PI2EQX502E (1.8V)
DP1+ TX2+/RX2+
2-Channel USB 3.0 D+,D-
DP1- TX2-/RX2- ReDriver/Repeater
100KΩ 100KΩ

CC1
I2C I2C System
Detection
DP3+ CC2 Control MPU
DP3-

RX1+/TX1+
RX1-/TX1- D+,D- UART
RX+/TX+ 100KΩ 100KΩ
(top & I2C
RX-/TX- Bottom) 2x4 Xbar D+,D-
PI3DBS3224 PI3USB9281A
(Device Side) D+,D-
Vbus PI5USB2544/46
(Host Side)
DP0+ RX2+/TX2+
DP0- RX2-/TX2-
100KΩ 100KΩ
Type C connector

SBU1/SBU2 Notebook PC
SBU2/SBU1
AUX+
AUX-

diodes.com | 1-408-232-9100

You might also like