TLE-ICT GRADE 9

WORKSHEETS
4TH QUARTER

NAME:_________________________________________ GRADE & SECTION: _____________

LESSON 1: PERFORMING MENSURATION AND CALCULATION (PMC)

ACTIVITY 1-MATCHING TYPE
Directions: Match items on column A with column B. Write your answers on the blank space
provided.
COLUMN A COLUMN B
___1. It is a memory unit that connects directly to the
A. Cache Memory
CPU is the primary memory.
___2. It must be continually refreshed in order to maintain
B. Main memory
the data.
___3. It can be erased one byte at a time, rather than
C. Read-only memory
erasing the entire chip.
D. Electrically Erasable
___4. The memory retains its contents as long as power Programmable ROM or
is being supplied. EEPROM
___5. It contains instructions that can be directly E. Programmable ROM or PROM
accessed by the CPU.
___6. It can be programmed only once and is not
F. Secondary memory
erasable.
___7. It is non-volatile in nature and is used to store G. Electrically Erasable
programs and data when they are not being Programmable ROM or
processed. EEPROM
___8. It is read-only memory that can be modified only
H. Static RAM or SRAM
once by a user.
___9. It acts as a buffer between the CPU and the main I. Dynamic Ram or DRAM
memory.
J. Erasable
___10. It can be erased by exposing it to ultra-violet light Programmable ROM or
for a duration of time. EPROM
K. DDR2 RAM or double data rate
two

ACTIVITY 2- IDENTIFICATION
Directions: Read each question carefully. Identify the following and choose of the best answer
and write it on the blank space provided.
____________________1.What physical device capable of storing information temporarily, like
RAM (Random Access Memory), or permanently, like ROM (ReadOnly Memory).
____________________2.It is also known as the volatile memory and the system's short-term
memory.
____________________3.It contains instructions that can be directly accessed by the CPU.
____________________4.It indicates the memory to retain its contents as long as power is being
supplied.
____________________5.It must be continually refreshed to maintain the data.
____________________6.It is a memory unit that connects directly to the CPU is the primary
memory.
____________________7.It is an integrated electronic circuit that performs the calculations that
runs a computer.
____________________8.It represents how much disk space can one or more storage devices
provides.
____________________9.It acts as a buffer between the CPU and the main memory.
____________________10. It is used to process images so they can be displayed on your
monitor.

ACTIVITY 3-TRUE OR FALSE

Directions: Write True if the underlined word/s makes the statement correct and False if the
statement is incorrect. Write your answers on the blank space provided.

__________1. A group of 8 bits is called a nibble.

__________2. Most computers can process millions of bits every second.
__________3. 8 bits (b) is equivalent to 1byte (B) system which is made up of 10 numbers.
__________4. A hard drive's storage capacity is measured in gigabytes or terabytes.
__________5. The binary system on computers uses combinations of 1s and 2s.
__________6. This counting system is known as decimal, denary, or base 10.
__________7. A number base indicates how many digits are available within a numerical
system.
__________8. Binary is known as base 10 because there are ten choices of digits between 0
and 9.
__________9. The binary system is also known as base 2.
__________10. Computers use binary codes to represent and interpret letters, numbers and
special characters with bits.

ACTIVITY 4-CONVERSION
Directions: Convert the following numbers to their binary equivalents. Show your solution.
 1) 2710

2) 3310

3) 5410

4) 4710

5) 7810

27 26 25 24 23 22 21 20
128 64 32 16 8 4 2 1 Answer
1 0 1 0 1 0 0 1 6)
0 0 1 1 0 0 1 0 7)
0 0 1 1 1 0 0 0 8)
0 1 1 0 0 0 1 0 9)

1 1 1 0 1 1 1 0 10)

ACTIVITY 5 - IDENTIFICATION
Directions: Read each question carefully. Identify the following and choose of the best answer
and write it on the blank space provided.
_______________1. It is the smallest unit of data in computing.
_______________2. It is a tiny switch that is activated by the electronic signals it receives.
_______________3. These are sets of instructions that is translated into machine code. It is
simple binary codes that activate the CPU.
_______________4. It is represented by a 0 or a 1.
_______________5. It indicates how many digits are available within a numerical system.

ACTIVITY 6 – THE STORAGE MEDIA

Directions: Look and list down different storage media around you. Then, write its type
and storage capacity as shown in the table below:

Storage Media Type Capacity

(Ex. Memory Card, (Magnetic/Optical/Flash (Example:
Flashdrive) Memory) KB,MB,GB,T)
Ex. CD-ROM Optical 700 MB
1.

2.

3.

4.

5.

ACTIVITY 7– COMPUTE ME
Directions: Compute how much data can be stored within a certain data storage. Show your
solution.

1. Heaven has a smart phone with 6GB of storage. She wants to store music on her
phone. A typical mp3 encoded music file takes up 4MB. How many tracks can be stored
on her phone?

2. Keiffer wants to store photos on his phone with 32 GB of storage. Given that a typical
photo taken by a phone will be around 2MB, How many pictures can be stored on his
phone?
3. Freya has a photo that is 2MB. How many of these can she store on his 3GB memory stick?

4. Alice has 600 MB of data and Alucard has 2000 MB of data. Will it all fit on Alice's 4 GB thumb
drive?

5. Esmeralda has 100 small images. Each of which is 500 KB. How much space does she take up
overall in MB?

ACTIVITY 7– MATCHING TYPE

Directions: Match column A with column B about equivalent conversion of the following
unit of measurement in the storage process of computers. Write the chosen in the blank
space provided.

Column A Column B
_____1. Byte (B) A. 1024 KB
_____2. Kilobyte (KB) B. 1024 PB
_____3. Megabyte (MB) C. 1 byte
_____4. Gigabyte (GB) D. 1024 MB
_____5. Terabyte (TB) E. 1024 ZB
_____6. Petabyte (PB) F. 1024 TB
_____7. Exabyte (EB) G. 1024 GB
_____8. Zettabyte (ZB) H. 1024 EB
_____9. Yottabyte (YB) I. 1024 bytes
J. 1024 bits

ACTIVITY 8–NAME THAT DEVICE!

Directions: Recognize the following components of your computer system:

Name That Device!

ACTIVITY 9–GIVE ADVICE!
Directions: Read the following situations and give proper advices/tips on how to maintain storage
media.
Situation #1: Ashia purchased a new hard disk drive for her computer. Give her tips
on how to maintain it.
Tips:__________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
_____________________________________________________________________________.
Situation #2: Kirsten formatted her flashdrive due to virus. Give her tips on how to avoid data
damage.
Tips:__________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
_____________________________________________________________________________.
Situation #3: Joy received a memory card as a gift on her birthday. Give her advice on how to take
care of the storage media.
Tips:__________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
_____________________________________________________________________________.

ACTIVITY 10–TRUE OR FALSE

Directions: Write True if the statement correct and False if the statement is incorrect. Write your
answers on the blank space provided.
__________1. Storage media should not be allowed to encounter liquids, dust, or smoke,
and should not be exposed to either extreme heat or direct sunlight.
__________2. Optical disks should be kept it away from static electricity and humid places.
__________3. Do not place your USB flash drives near a gaming set or TV set for a long
period because it leads to data damage.
__________4. It is important to make sure that you always safely remove your storage
devices from your computer.
__________5. Flash memory devices should only be handled by the extreme edges or the
center hole, and the recording surface must not be touched
__________6. CD-R are recordable discs that can be written to once.
__________7. Blu-ray disc is an optical storage device that is read-only or cannot be
modified nor deleted.
__________8. Memory card is a type of storage media that is often used to store photos,
videos, or other data in electronic devices.
__________9. The floppy diskette is a 3 ½ inches disk that can store 1.44 MB of data.
__________10.The hard drive stores the operating system, software applications, or programs,
and the majority of computer’s data.

ACTIVITY 11–IDENTIFICATION
Directions: Read each question carefully. Identify the following and choose of the best answer
and write it on the blank space provided.
____________________1. It is the most common type of storage used in computers.
____________________2. It is a data-storage medium used transferring data between a
personal computer (PC) and other digital devices.
____________________3. It is a portable storage device which connects a computer via
USB port.
____________________4. It is an internal hard drive is the main storage device in a
computer.
____________________5. It uses lasers and lights as its method of reading and writing
data.
____________________6. It should be pulled out safely from the PC after use because it
could result to full damage of the disk.
____________________7. It should be maintained and cleaned on a regular basis to
prevent damage to media.
 ____________________8. It causes the melting of electronic elements in the storage
media.
____________________9. It is the data-carrying layer of the optical disk which is the most
prone to damage.
____________________10. There should be enough _______ to prevent damaging your
devices with moisture or heat.

LESSON 2: PREPARING AND INTERPRETING TECHNICAL DRAWING

ACTIVITY 1– MATCHING TYPE

Directions: Match items on column A with column B. Write your answers on the blank space
provided.
COLUMN A COLUMN B
_____1. It is a picture that represents the
components of a process, device, or other
object using abstract. It is often standardized A. Block Diagram
symbols and lines.
_____2. It is an act or discipline of creating
models or plans to build something through B. Floor Plan
designs.
_____3. It is a graphical representation of
decisions and their results mapped out in C. Flowchart
individual shapes.
_____4. It is a visual representation of how
parts of an object relate to each other and D. Schematic Diagram
work together.
_____5. It is a scaled diagram of a room or
E. Technical Drawing
building viewed from above.

ACTIVITY 2– TRUE OR FALSE

Directions: Write True if the statement correct and False if the statement is incorrect. Write your
answers on the blank space provided.
_____________1. A flowchart is a graphical representation of decisions and their results mapped
out in individual shapes.
_____________2. A block diagram is a picture that represents the components of a process,
device, or other object using abstract often standardized symbols and lines.
_____________3. A schematic diagram is a visual representation of how parts of an object relate
to each other and work together.
_____________4. A floor plan is a scaled diagram of a room or building viewed from above.
_____________5. Technical drawing is an act or discipline of creating models or plans to build
something through designs.
ACTIVITY 3– IDENTIFICATION
Directions: Read each question carefully. Identify the following and choose of the best answer
and write it on the blank space provided.
___________________1. Which is the act or discipline of creating models or plans to build
something through designs?
___________________2. Joanna wanted to present a layout of her dream house. Which type of
technical drawing should she use?
___________________3. Maria is a computer engineer. She was tasked to create a step-by-step
diagram of the process in the input and output of the computer data. Which technical drawing
should she use?
___________________4. Kathrine is an electrical engineer and was tasked to present a picture
that represents the components of a process, device, or other object using abstract often
standardized symbols and lines. Which appropriate technical drawing should she use?
___________________5. Which technical drawing is the visual representation of how parts of an
object relate to each other and work together?
___________________6. Which element appears at the start and at the end of a flowchart?
___________________7. Which element is represented by a diamond?
___________________8. Which element is represented by a rectangle and refers to an action in
a business process?
___________________9. Which element is represented by a small circle or a connector box and
is labelled using letters?
___________________10.Which symbol represents the input and output?
___________________11. It is a process that can answer a decision of "yes" or "no" requires a
decision box.
___________________12. It is drawn in one direction, preferably from top to bottom, keep a
flowchart clear.
___________________13. It is represented by a small circle or a connector box and is labeled
using letters.
___________________14. It is represented by a rectangle.
___________________15. It appears at the start and at the end of a flowchart.

ACTIVITY 4–COMPLETE ME!

Directions: Complete the table below.
 A. Symbol B. Meaning
1. Input

2.

3. Decision

4.

5.

ACTIVITY 5–MULTIPLECHOICES
Directions: Read each question carefully. Choose the letter of the best answer and
write it on the space provided before each number.
_____1. Abigail was starting to create a flowchart. Which symbol should she use at the
begging of her flowchart?

A. B. C. D.

_____2. Cedrick wanted to indicate that a step is connected to another page or part of the
Flowchart?

A. B. C. D.
_____3. Elly process that can answer a decision of "yes" or "no". Which symbol should she
use?

A. B. C. D.
_____4. Which element of flowchart is represented by a small circle or a connector box and is
labeled using letters?
A. Arrow Lines C. Decision
B. Connector D. Process
_____5. Which element of flowchart is represented by a rectangle and refers to an action?
A. Connector C. Sub Process
B. Process D. Terminator