Scribd
Upload
80 views1 page

3CP C Section 5M

This document provides details on a casing policy for a 9-5/8" x 3-1/2" casing with 13-5/8" and 11" flange sizes and 5000 PSI working pressure. It lists 10 items that make up each set, including a tubing spool assembly, secondary seal, gate valves, companion flanges, plugs, needles valves, pressure gauges, stud bolts, ring joint gaskets, and smaller stud bolts. Materials and part numbers are provided for each item.

Uploaded by

Rohan Chunara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views1 page

3CP C Section 5M

This document provides details on a casing policy for a 9-5/8" x 3-1/2" casing with 13-5/8" and 11" flange sizes and 5000 PSI working pressure. It lists 10 items that make up each set, including a tubing spool assembly, secondary seal, gate valves, companion flanges, plugs, needles valves, pressure gauges, stud bolts, ring joint gaskets, and smaller stud bolts. Materials and part numbers are provided for each item.

Uploaded by

Rohan Chunara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Page 97 of 229

ANNEXURE EDP CODE


5S 3
WH - INDIVIDUAL SECTION 165100284
3 Casing Policy; General Service ; 5000 PSI W.P.

Casing Size : 9-5/8" x 3-1/2"


Flange Size : 13-5/8" 5000 PSI X 11" 5000 PSI
Each Set Consisting of
Section - C Tubing Spool Assembly
PSL - 1 ; Temperature Rating - U ; Material Class - BB

Qty/Set
Sl. No Description Part No.
(No.)

Tubing spool assy. (forged low alloy steel )13-5/8" 5000 PSI WP
flanged bottom X 11" 5000 PSI flanged top with 2 each 2-1/16"
5000 PSI studded side outlets & 1.9" Sharp VEE threads for VR
plugs. Bottom prepare to receive secondary seals for 9-5/8"
1 1 no. 4745
casing & top prepared to receive tubing hanger with tie down
anchor bolts. Two SCSSV ¼" continuous control line exit ports at
180 degree apart through top flange with necessary swage lock
fittings and blind plugs. (BDP70)
4156127
2 1 set Secondary seal assy for 13 5/8" X 9-5/8" casing.
4532126
Gate valve 2-1/16" 5000 PSI, HWO, flanged ends. body and
bonnet to be Forged Low Alloy Steel . Gate and seat SS-410 hard
3 4 no. faced by stellite / tungsten carbide. Stem to be of SS-410/ 17-4PH 4746
with molybdenum disulphide coating for anti- galling resistance.
With non-rising stem and metal-to-metal seal.

4 2 no. Companion flange 2-1/16" 5000 PSI with 2" LP box threads. 4600119
5 2 no. Flow line plug 2"LP X 4" long tapped 1/2" NPT. 4B04108
6 2 no. Needle valve angle 1/2" NPT male X female. 4551
Pressure gauge 0 - 5000 PSI, 6" OD faces with 1/2" NPT pin end
7 2 no. 964642250000
connection with bourdon tube SS-316.
Stud bolts 1-7/8" dia X 13-3/4" long c/w 2 nuts each, Xylan
8 12 sets 96469345
coated.
9 2 no. Ring joint gasket RX-54. SS-316 RX54S316-4
10 32 sets Stud bolts 7/8" dia X 6" long c/w 2 nuts each, Xylan coated. 96469328

You might also like