Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    AAS 920 376G Telaire Ventostat T8041 T8042 Web 1485169

    Uploaded by

    paola ochoa sanchez
    The document describes new CO2 duct probe transmitters from Telaire called the Ventostat T8041 and T8042. The transmitters offer accuracy and versatility at an affordable price using Telaire's ABC Logic self-calibration system. They are designed for indoor air quality and energy conservation applications by monitoring CO2 levels in buildings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AAS 920 376G Telaire Ventostat T8041 T8042 Web 1485169

    Uploaded by

    paola ochoa sanchez
    20 views5 pages
    The document describes new CO2 duct probe transmitters from Telaire called the Ventostat T8041 and T8042. The transmitters offer accuracy and versatility at an affordable price using Telaire's ABC Logic self-calibration system. They are designed for indoor air quality and energy conservation applications by monitoring CO2 levels in buildings.

    Original Title

    AAS-920-376G-Telaire-Ventostat-T8041-T8042-web-1485169

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes new CO2 duct probe transmitters from Telaire called the Ventostat T8041 and T8042. The transmitters offer accuracy and versatility at an affordable price using Telaire's ABC Logic self-calibration system. They are designed for indoor air quality and energy conservation applications by monitoring CO2 levels in buildings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views5 pages

    AAS 920 376G Telaire Ventostat T8041 T8042 Web 1485169

    Uploaded by

    paola ochoa sanchez
    The document describes new CO2 duct probe transmitters from Telaire called the Ventostat T8041 and T8042. The transmitters offer accuracy and versatility at an affordable price using Telaire's ABC Logic self-calibration system. They are designed for indoor air quality and energy conservation applications by monitoring CO2 levels in buildings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    ®

    ®
    Ventostat T8041/T8042
    Telaire CO2 Duct Probe Transmitters
    Telaire is excited to announce to announce a new
    generation of Telaire CO2 transmitters targeting
    indoor air quality and energy conservation
    applications. The Ventostat® T8041/T8042 duct
    mount CO2 transmitters offer accuracy and
    versatility at an affordable price. This exceptional
    product line touts an unobtrusive form factor
    that is easy to install, simple to use, and remains
    accurate over the expected life of the device
    using Telaire’s patented ABC Logic™ (Automatic
    Background Calibration) technology.

    Features
    • Gas permeable, water resistant diffusion filter
    • Simple installation (mounting hardware and prevents particulate and water contamination of
    instructions included) the sensor

    • Two models with different probe lengths to suit a • RoHS compliant


    variety of return air duct sizes
    • Lifetime calibration guarantee (ABC Logic™ on)
    • Offers standard 0-10 volt or 0-5 volt output
    Applications
    • Patented absorption infrared/gas sensing engine
    provides high accuracy in a compact low-cost CO2 transmitters can be used in a broad range
    package of applications including air quality monitoring
    in buildings. CO2 concentration levels in
    • Patented ABC Logic™ self-calibration system buildings are monitored to provide an indication
    eliminates the need for manual calibration in most of occupancy and to drive a ventilation control
    applications strategy. An effective DCV (Demand Controlled
    Ventilation) strategy will conserve energy and
    maintain indoor air quality.

    Amphenol
    Advanced Sensors
    Installation Instructions
    1. Before installing the sensor, note the direction of the airflow.
    2. Drill/cut one [38.10 mm] 1 ½” hole. Punch/drill two [3.17 mm]
    1/8” holes for mounting screws.
    3. Slide sensor into [38.10 mm] 1 ½” hole and secure with
    screws.
    4. Connect the conduit and make necessary wire connections.
    5. Install lid, and ensure it snaps into place.

    24 AWG
    24 VAC

    Installation Drawing for T8041 and T8042 (T8042 Installation shown)


    Dimensional Drawings

    143.66 5.66

    77.46 3.05

    31.50 [1.24]

    77.46 3.05

    103.77 4.09
    40.19 1.58

    T8041 Dimensions (All Dimensions are in MM [Inch].)

    143.66 5.66

    77.47 3.05

    77.46 3.05 31.50 [1.24]

    40.19 1.58

    205.08 8.07

    T8042 Dimensions (All Dimensions are in MM [Inch].)


    Model T8041/T8042 Specifications
    Technology
    The technology is based on the absorption of light
    in a gold-plated reflective light pipe or waveguide
    diffusion gas chamber. A gas permeable PTFE filter
    prevents particulate and water contamination of the
    sensor. Light is absorbed in proportion to the CO2
    concentration and the remaining light is measured and
    Certifications
    converted into an analog signal.
    RoHS compliance
    Measurement Range FCC Part 15,B
    0-2000 PPM factory calibrated CE EMC EN61000-6-2, class B, criterion B*
    *Deviations of the output signal may occur during strong
    Part Numbers electrical fast transients on the power line
    T8041 (0-10V), T8041-5V (0-5V), T8042 (0-10V), T8042- Enclosure flammability rating – UL94-5VA
    5V
    (0-5V) Warm-up Time
    < two minutes (operational); 10 minutes to achieve maximum
    Duct Air Velocity accuracy
    0 to 1500 ft/min (0 to 450 meter/min)
    Operating Conditions
    Temp Dependence • Temperature: 0ºC to 50ºC (32ºF to 122ºF)
    0.2% of full scale per ºC • Humidity: 0 to 95% relative humidity, non-condensing

    Stability Storage Conditions


    <2% of full scale over the life of the sensor (10 years -40ºC to 70ºC (-40ºF to 158ºF)
    typical)
    Output
    *Accuracy • Analog: 0 to 10V or 0 to 5V
    ±40 ppm +3% of reading @ 22ºC (72ºF) when compared
    with a factory certified reference Power Supply Requirements
    18 to 30 VAC RMS, 50/60 Hz or 18 to 42 VDC, polarity
    Non-linearity protected.
    <1% of full scale @ 22ºC (72ºF)
    Power Consumption
    Pressure Dependence Typical values (1.65 watts peak, 0.65 watts avg.
    0.13% of reading per mm of mercury @ 42 VDC)
    *Note: The Telaire product line offers patented ABC Logic™
    *Calibration software for self-correction of drift to better than ±20 ppm per
    Sensors will be calibrated at zero and span at the year. The system is virtually free of maintenance and typically
    factory. Calibration in the field will not be required. has a lifetime of more than 10 years.
    Sensors will be shipped with ABC Logic™ turned on.
    Physical Requirements
    Response Time Dimensions:
    Three minutes typical for a 90% step change at low Probe Length : T8041 4.09 in (10.38 cm)
    duct speeds T8042 8.07 in (20.51 cm)
    Probe Diameter : 1.24 in (3.15 cm)
    Sampling Rate Junction Box Depth : 1.58 in (4.02 cm)
    Every two seconds Junction Box H x L: 3.05 in x 3.05 in (7.46 cm x 7.46 cm)
    Color: Grey (GY6275)

    Installation Kit
    Included with the transducer are wire nuts, mounting screws
    and installation instructions.

    Amphenol www.amphenol-sensors.com
    © 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.

    Advanced Sensors Other company names and product names used in this document are the registered trademarks or
    trademarks of their respective owners.

    AAS-920-376G-03/2014
    Mouser Electronics

    Authorized Distributor

    Click to View Pricing, Inventory, Delivery & Lifecycle Information:

    Amphenol:
    T8042 T8041 T8041-5V T8042-5V

    You might also like