NanoVNA Menu Structure Map

HOME
MENU

DISPLAY TRACE TRACE 0 OFF

MARKER FORMAT LOGMAG TRACE 1 SINGLE

STIMULUS SCALE SCALE/DIV PHASE TRACE 2 BACK

CH0 REFERENCE
CAL CHANNEL DELAY TRACE 3
REFLECT POSITION

RECALL CH1 ELECTRICAL

RECALL RECALL 0 BACK SMITH BACK
SAVE THROUGH DELAY

CLOSE SAVE RECALL 1 BACK BACK SWR

SELECT
MARKER
BACK RECALL 2 MORE POLAR
START MARKER 1
RECALL 3 BACK LINEAR
STOP MARKER 2
RECALL 4 BACK
CENTER MARKER 3
BACK
NUMERIC
SPAN MARKER 4 KEYPAD

SAVE 0 BACK ALL OFF

SAVE 1 BACK
START
SAVE 2
STOP
SAVE 3
NUMERIC
CENTER
KEYPAD
SAVE 4
SPAN
BACK
Cx
D CW FREQ
R nanoVNA
S GEN111.TAOBAO.COM PAUSE
T SWEEP
X
BACK

CALIBRATE OPEN

RESET SHORT SAVE 0

START 50.000 kHz STOP 900.000 000 MHz

CORRECT LOAD SAVE 1

If calibration is available, the CAL status will be displayed. Otherwise,
it is hidden. C * is in the state where an unsaved calibration is applied BACK ISOLATION SAVE 2

(it disappears from memory when the power is turned off). THRU SAVE 3

C0 to C4 Indicates that the saved calibration values are applied to one

DONE SAVE 4
of the save locations. Saved or Unsaved will change when calibration
data is properly saved. The letters below C indicate that the following BACK BACK

error terms have been applied. D: Directivity, R: Reflection Tracking, By: AE5CZ
S: Source Match, T: Transmission Tracking and X: Isolation Date: 26 July 2019
Release: 1.1