GEEKSFORGEEKS

Measures of Central Tendency in Statistics

Central Tendencies in Statistics are the numerical values that are used to represent mid-
value or central value a large collection of numerical data. These obtained numerical values
are called central or average values in Statistics. A central or average value of any statistical
data or series is the value of that variable that is representative of the entire data or its
associated frequency distribution. Such a value is of great significance because it depicts the
nature or characteristics of the entire data, which is otherwise very difficult to observe.

Table of Content
Measures of Central Tendency Meaning
Measures of Central Tendency
Mean
Median
Mode
FAQs

Measures of Central Tendency Meaning

The representative value of a data set, generally the central value or the most occurring value
that gives a general idea of the whole data set is called the Measure of Central Tendency.

Measures of Central Tendency

Some of the most commonly used measures of central tendency are:

Mean
Median
Mode
  

Mean
Mean in general terms is used for the arithmetic mean of the data, but other than the arithmetic
mean there are geometric mean and harmonic mean as well that are calculated using different
formulas. Here in this article, we will discuss the arithmetic mean.

Mean for Ungrouped Data

Arithmetic mean ( ) is defined as the sum of the individual observations (xi) divided by the

total number of observations N. In other words, the mean is given by the sum of all
observations divided by the total number of observations.

OR

Mean = Sum of all Observations ÷ Total number of Observations

Example: If there are 5 observations, which are 27, 11, 17, 19, and 21 then the mean ( ) is
given by

 = (27 + 11 + 17 + 19 + 21) ÷ 5
    = 95 ÷ 5

   = 19

Mean for Grouped Data

Mean ( ) is defined for the grouped data as the sum of the product of observations (xi) and

their corresponding frequencies (fi) divided by the sum of all the frequencies (fi).

Example: If the values (xi) of the observations and their frequencies (fi) are given as follows:

xi 4 6 15 10 9

fi 5 10 8 7 10

then Arithmetic mean ( ) of the above distribution is given by

= (4×5 + 6×10 + 15×8 + 10×7 + 9×10) ÷ (5 + 10 + 8 + 7 + 10)

  = (20 + 60 + 120 + 70 + 90) ÷ 40

   = 360 ÷ 40

   = 9

Related Resources,

Mean Using Direct Method

Shortcut Method for Arithmetic Mean
Mean Using Step Deviation Method
Types of Mean

Mean can be classified into three different class groups which are

Arithmetic Mean
Geometric Mean
Harmonic Mean

Arithmetic Mean: The formula for Arithmetic Mean is given by 

Where,

x1, x2, x3, . . ., xn are the observations, and

N is the number of observations.

Geometric Mean: The formula for Geometric Mean is given by 

Where,

x1, x2, x3, . . ., xn are the observations, and

n is the number of observations.

Harmonic Mean: The formula for Harmonic Mean is given by 

OR
 Where,

x1, x2, . . ., xn are the observations, and

n is the number of observations.

Properties of Mean (Arithmetic)

There are various properties of Arithmetic Mean, some of which are as follows:

The algebraic sum of deviations from the arithmetic mean is zero i.e., 

.
If  is the arithmetic mean of observations and a is added to each of the observations, then
the new arithmetic mean is given by 
If  is the arithmetic mean of observations and a is subtracted from each of the
observations, then the new arithmetic mean is given by 
If   is the arithmetic mean of observations and a is multiplied by each of the observations,
then the new arithmetic mean is given by 
If   is the arithmetic mean of observations and each of the observations is divided by a,
then the new arithmetic mean is given by 

Disadvantage of Mean as Measure of Central Tendency

Although Mean is the most general way to calculate the central tendency of a dataset however
it can not give the correct idea always, especially when there is a large gap between the
datasets. 

Median
The Median of any distribution is that value that divides the distribution into two equal parts
such that the number of observations above it is equal to the number of observations below it.
Thus, the median is called the central value of any given data either grouped or ungrouped.

Median of Ungrouped Data

To calculate the Median, the observations must be arranged in ascending or descending order.
If the total number of observations is N then there are two cases

Case 1: N is Odd

Median = Value of observation at [(n + 1) ÷ 2]th Position

When N is odd the median is calculated as shown in the image below.

Case 2: N is Even

Median = Arithmetic mean of Values of observations at (n ÷ 2)th and [(n ÷ 2) + 1]th

Position

When N is even the median is calculated as shown in the image below.

Example 1: If the observations are 25, 36, 31, 23, 22, 26, 38, 28, 20, 32 then the Median is
given by 

Arranging the data in ascending order: 20, 22, 23, 25, 26, 28, 31, 32, 36, 38

N = 10 which is even then

Median = Arithmetic mean of values at (10 ÷ 2)th and [(10 ÷ 2) + 1]th position

Median = (Value at 5th position + Value at 6th position) ÷ 2

Median = (26 + 28) ÷ 2

Median = 27

Example 2: If the observations are 25, 36, 31, 23, 22, 26, 38, 28, 20 then the Median is given
by

Arranging the data in ascending order: 20, 22, 23, 25, 26, 28, 31, 36, 38

N = 9 which is odd then

 Median = Value at [(9 + 1) ÷ 2]th position

Median = Value at 5th position

Median = 26

Median of Grouped Data

The Median of Grouped Data is given as follows:

Where,

l is the lower limit of median class,

n is the total number of observations,
cf is the cumulative frequency of the preceding class,

f is the frequency of each class, and 

h is the class size.

Example: Calculate the median for the following data.

Class 10 – 20 20 – 30 30 – 40 40 – 50 50 – 60

Frequency 5 10 12 8 5

Solution:

Create the following table for the given data.

Class Frequency Cumulative Frequency

10 – 20 5 5
20 – 30 10 15

30 – 40 12 27
 40 – 50 8 35
50 – 60 5 40
As n = 40 and n/2 = 20,

Thus, 30 – 40 is the median class.

l = 30, cf = 15, f = 12, and h = 10

Putting the values in the formula  

Median = 30 + (20 – 15)/12) × 10

Median = 30 + (5/12) × 10

Median = 30 + 4.17

Median = 34.17

So, the median value for this data set is 34.17

Mode
The Mode is the value of that observation which has a maximum frequency corresponding to it.
In other, that observation of the data occurs the maximum number of times in a dataset.

Mode of Ungrouped Data

Mode of Ungrouped Data can be simply calculated by observing the observation with the
highest frequency. Let’s see an example of the calculation of the mode of ungrouped data.

The mode of the data set is the highest frequency term in the data set as shown in the image
added below.
Example: Find the mode of observations 5, 3, 4, 3, 7, 3, 5, 4, 3.

Solution:

Create a table with each observation with its frequency as follows:

xi 5 3 4 7

fi 2 4 2 1

Since 3 has occurred a maximum number of times i.e. 4 times in the given data;

Hence, Mode of the given ungrouped data is 3.

Mode of Grouped Data

The formula to find the mode of the grouped data is:

 Where, 

l is the lower class limit of modal class, 

h is the class size, 
f1 is the frequency of modal class, 

f0 is the frequency of class which proceeds the modal class, and 

f2 is the frequency of class which succeeds the modal class.

Example: Find the mode of the dataset which is given as follows.

Class Interval 10-20 20-30 30-40 40-50 50-60

Frequency 5 8 12 16 10
Solution:

As the class interval with the highest frequency is 40-50, which has a frequency of 16.
Thus, 40-50 is the modal class. 

Thus, l  = 40 , h = 10 , f1 = 16 , f0 = 12 , f2 = 10 

Plugging in the values in formula  , we get

Mode = 40 + (16 – 12)/(2 × 16 – 12 – 10) × 10

Mode = 40 + (4/10)×10

Mode = 40 + 4

Mode = 44

Therefore, the mode for this set of data is 44.

Learn more about Mean, Median, and Mode of Grouped Data

Empirical Relation Between Measures of Central Tendency

The three central tendencies are related to each other by the empirical formula which is given
as follows:

2 × Mean + Mode = 3 × Median

This formula is used to calculate one of the central tendencies when two other central
tendencies are given.

FAQs on Measures of Central Tendency

1. What is a Measure of Central Tendency in Statistics?

Measure of Central Tendency of a dataset represent a central value or a typical value for a
dataset which can be used to do further analysis on the data.

2. What is the Mean?

Mean is the Average value of the dataset and can be calculated Arithmetically,
Geometrically, and Harmonically as well. Generally by term “mean” means the arithmetic
mean of the data.

3. When is the Mean a good measure of Central Tendency?

Mean is a good measure of central tendency when data is normally distributed and there
is no extreme values or outliers in the dataset.

4. What is the Median?

Median is the middle value of the data set when arranged in increasing or decreasing
order i.e., in either ascending or desending order there are equal number of observations
on both sides of median.
 5. When is the Median a good measure of Central Tendency?

The median is a good measure of central tendency when dataset is skewed or there are
extreme values or outliers in the dataset.

6. What is the Mode?

Mode is highest frequency observation of the given dataset.

7. When is the Mode a good measure of Central Tendency?

The mode is a good measure of central tendency when there are clear peaks in the
dataset of frequencies of observations.

8. Can a dataset have more than one mode?

Yes, a dataset can have more than one mode as there can be two observations with same
number of highest frequencies.

9. What is the purpose of central tendency?

The primary goal of central tendency is to offer a single value that effectively represents a
set of collected data. This value aims to capture the core or typical aspect of the data,
providing a concise summary of the overall information.

Article Tags : Class 11 School Learning School Mathematics Technical Scripter Maths-Class-11

Technical Scripter 2020

Recommended Articles
1. Class 9 RD Sharma Solutions - Chapter 24 Measures of Central Tendency - Exercise 24.4
2. Class 9 RD Sharma Solutions - Chapter 24 Measures of Central Tendency - Exercise 24.1 | Set
2
3. Class 9 RD Sharma Solutions - Chapter 24 Measures of Central Tendency - Exercise 24.1 | Set
1
4. Class 9 RD Sharma Solutions - Chapter 24 Measures of Central Tendency - Exercise 24.2
5. Class 9 RD Sharma Solutions - Chapter 24 Measures of Central Tendency - Exercise 24.3
6. Median(Measures of Central Tendency): Meaning, Formula, Merits, Demerits, and Examples
7. Measures of Central Tendency
8. Why is arithmetic mean the most popular measure of the central tendency?
9. Which measure of central tendency can be determined graphically?
10. Which measure of central tendency is associated with ogives?
11. How to find Arithmetic Mean in Central Tendency?
12. Central Tendency
13. Measures of Dispersion | Meaning, Absolute and Relative Measures of Dispersion
14. Understanding Quadrilaterals - Measures of the Exterior Angles of a Polygon
15. Measures of spread - Range, Variance, and Standard Deviation
16. Foreign Trade Promotion Measures and Schemes
17. Central Problems of an Economy
18. Central Angle of a Circle Formula
19. Central Limit Theorem Formula
20. Class 10 RD Sharma Solutions - Chapter 7 Statistics - Exercise 7.5 | Set 2
21. Class 9 NCERT Solutions - Chapter 14 Statistics - Exercise 14.1
22. Class 10 NCERT Solutions - Chapter 14 Statistics - Exercise 14.1
23. Class 9 NCERT Solutions- Chapter 14 Statistics - Exercise 14.2
24. Class 9 NCERT Solutions- Chapter 14 Statistics - Exercise 14.4
25. Class 10 RD Sharma Solutions - Chapter 7 Statistics - Exercise 7.1 | Set 1

Read Full Article

A-143, 9th Floor, Sovereign Corporate Tower,

A-143, 9th Floor, Sovereign Corporate Tower,
Sector- 136, Noida, Uttar Pradesh (201305)
[email protected]

Company
About Us
Careers
In Media
Contact Us
Privacy Policy
Copyright Policy
Advertise with us

Learn

DSA
Algorithms
Data Structures
SDE Cheat Sheet
Machine Learning
CS Subjects
Video Tutorials
Courses

NEWS

Top News
Technology
Work & Career
Business
Finance
Lifestyle
Knowledge

Languages

Python
 Java
CPP
Golang
C#
SQL
Kotlin

Web Development
Web Tutorials
Django Tutorial
HTML
JavaScript
Bootstrap
ReactJs
NodeJs

Contribute
Write an Article
Improve an Article
Pick Topics to Write
Write Interview Experience
Internships
Video Internship

@geeksforgeeks, Some rights reserved