HILTI HKD

FLUSH ANCHOR
Technical Datasheet
Update: Jan-23
HKD Flush anchor
Everyday standard manual set flush anchor for single anchor applications

Anchor version Benefits

- Simple and well proven
HKD - Approved, tested and confirmed
(M8-M20) by everyday jobsite experience
- Reliable setting thanks to simple
visual check
- Versatile
HKD-S(R) - For medium-duty fastening with
(M6-M20) bolts or threaded rods
- Available in various materials and
sizes for maximized coverage of
possible applications
HKD-E(R)
(M6-M20)

Base material Load conditions

Concrete Static/
(non-cracked) quasi-static

Installation conditions Other information

European CE PROFIS Corrosion

Hammer Technical conformity Engineering resistance
drilled holes Assessment design
software

Approvals / certificates
Description Authority / Laboratory No. / date of issue
European Technical Assessment a) CSTB, Marne-la-Vallèe ETA-02/0032 / 2020-11-04
Hilti technical data Hilti
a) All data given in this section according to ETA-02/0032, issue 2015-01-07.
Static resistance

All data in this section applies to:

- Correct setting (See setting instruction)
- No edge distance and spacing influence
- Concrete as specified in the table
- Steel failure
- Minimum base material thickness
- Concrete C 20/25, fck,cube = 25 N/mm²
- Screw or rod with steel grade 5.8 (carboon steel) and / or A4-70 (stainless steel)

Effective anchorage depth for static

Anchor size M6 M8 M10 M12 M16 M8 M8 M10 M10 M12 M16 M20
Effective anchorage depth hef [mm] 25 25 25 25 30 30 40 30 40 50 65 80

Characteristic resistance
Hilti technical data
M10x25 ETA-02/0032, issued 2020-11-04

M12x25

M10x30

M10x40

M12x50

M16x65

M20x80
M6x25

M8x25

M6x30

M8x30

M8x40
Anchor size
HKD 6,1 6,1 6,1 6,1 - 8,1 9,0 8,1 12,4 17,4 25,8 35,2
Tension HKD-S, HKD-E NRk [kN] 6,1 - - - 8,1 8,1 9,0 8,1 12,4 17,4 25,8 35,2
HKD-SR, HKD-ER 6,1 - - - 8,1 8,1 - - 12,4 17,4 25,8 35,2
HKD 5,0 6,1 6,1 6,1 - 8,6 9,2 10,0 11,0 18,3 33,8 49,5
Shear HKD-S, HKD-E VRk [kN] 5,0 - - - 5,0 7,0 7,0 7,4 8,0 14,1 21,9 34,7
HKD-SR, HKD-ER 6,2 - - - 6,4 8,4 - - 10,5 18,7 32,1 51,0

Design resistance
Hilti technical data ETA-02/0032, issued 2020-11-04
M10x25

M12x25

M10x30

M10x40

M12x50

M16x65

M20x80
M6x25

M8x25

M6x30

M8x30

M8x40

Anchor size
HKD 4,1 4,1 4,1 4,1 - 5,4 6,0 5,4 8,3 11,6 17,2 23,5
Tension HKD-S, HKD-E NRd [kN] 4,1 - - - 5,4 5,4 5,0 5,4 8,3 11,6 17,2 23,5
HKD-SR, HKD-ER 4,1 - - - 5,4 5,4 - - 8,3 11,6 17,2 23,5
HKD 4,0 4,1 4,1 4,1 - 6,9 7,3 8,0 8,8 14,6 27,0 39,6
Shear HKD-S, HKD-E VRd [kN] 3,9 - - - 3,9 5,5 5,5 5,9 6,4 11,3 17,5 27,8
HKD-SR, HKD-ER 4,1 - - - 4,2 5,5 - - 6,9 12,3 21,1 33,6
Recommended loads a)
Hilti technical data ETA-02/0032, issued 2020-11-04

M10x25

M12x25

M10x30

M10x40

M12x50

M16x65

M20x80
M6x25

M8x25

M6x30

M8x30

M8x40
Anchor size
HKD 2,9 2,9 2,9 2,9 - 3,8 3,6 3,8 5,9 8,3 12,3 16,8
Tension HKD-S, HKD-E NRec [kN] 2,9 - - - 3,8 3,8 3,6 3,8 5,9 8,3 12,3 16,8
HKD-SR, HKD-ER 2,9 - - - 3,8 3,8 - - 5,9 8,3 12,3 16,8
HKD 2,9 2,9 2,9 2,9 - 4,9 5,2 5,7 6,3 10,5 19,3 28,3
Shear HKD-S, HKD-E VRec [kN] 2,8 - - - 2,8 3,9 4,2 3,9 4,6 8,1 12,5 19,8
HKD-SR, HKD-ER 2,9 - - - 3,0 3,9 - - 4,9 8,8 15,1 24,0
a) With overall partial safety factor for action  = 1,4. The partial safety factors for action depend on the type of loading and shall be
taken from national regulations.

Materials

Mechanical properties
Anchor size M6 M8 M10 M12 M16 M20
HKD 570 570 570 570 640 590
Nominal tensile
HKD-S, HKD-E fuk [N/mm²] 560 560 510 510 - 460
strength
HKD-SR, HKD-ER 540 540 540 540 - 540
HKD 460 460 460 480 510 470
Yield strength HKD-S, HKD-E fyk [N/mm²] 440 440 410 410 - 375
HKD-SR, HKD-ER 355 355 355 355 - 355
HKD 20,7 26,7 32,7 60,1 105 167
Stressed
HKD-S, HKD-E As [mm²]
cross-section 20,9 26,1 28,8 58,7 - 163
HKD-SR, HKD-ER
HKD 32,3 54,6 82,9 184 431 850
Moment of
HKD-S, HKD-E W [mm³]
resistance 50 79 110 264 602 1191
HKD-SR, HKD-ER
Char. bending With 5.8 Gr. Steel 7,6 18,7 37,4 65,5 167 325
resistance for HKD-SR M0Rk,s [Nm]
rod or bolt 11 26 52 92 187 454
HKD-ER with A4-70

Material quality
Part Material
HKD Cold formed steel / galvanised to min. 5 µm
Anchor body HKD-S, HKD-E Steel Fe/Zn5 galvanised to min. 5 µm
HKD-SR, HKD-ER Stainless steel, 1.4401, 1.4404, 1.4571
HKD Cold formed steel
Expansion plug HKD-S, HKD-E Cold formed steel
HKD-SR, HKD-ER Stainless steel, 1.4401, 1.4404, 1.4571
Anchor dimensions of HKD, HKD-S, HKD-E, HKD-SR, HKD-ER
Hilti technical data ETA-02/0032, issued 2015-01-07

M10x25

M12x25

M10x30

M10x40

M12x50

M16x65

M20x80
M6x25

M8x25

M6x30

M8x30

M8x40
Anchor size
Eff. anchorage depth hef [mm] 25 25 25 25 30 30 40 30 40 50 65 80
Anchor diameter d1 [mm] 7,9 9,95 11,9 14,9 8 9,95 9,95 11,8 11,95 14,9 19,75 24,75
Plug diameter d2 [mm] 5,1 6,35 8,1 9,7 5 6,5 6,35 8,2 8,2 10,3 13,8 16,4
Plug length l1 [mm] 10 7 7 7,2 15 12 16 12 16 20 29 30

Anchor body Expansion plugs

Setting information

Setting details
Hilti technical data ETA-02/0032, issued 2015-01-07
M10x30a)
M10x25

M12x25

M10x40

M12x50

M16x65

M20x80
M6x25

M8x25

M6x30

M8x30

M8x40

Anchor size
Effective embedment
hef [mm] 25 25 25 25 30 30 40 30 40 50 65 80
depth
Nominal diameter of
do [mm] 8 10 12 15 8 10 10 12 12 15 20 25
drill bit
Cutting diameter of
dcut ≤ [mm] 8,45 10,5 12,5 15,5 8,45 10,5 10,5 12,5 12,5 15,5 20,5 25,5
drill bit
Depth of drill hole h1 ≥ [mm] 27 27 27 27 32 33 43 33 43 54 70 85
Screwing depth ls,min [mm] 6 8 10 12 6 8 8 10 10 12 16 20
Thread engagement
ls,max [mm] 12 11,5 12 12 12,5 14,5 17,5 12,7 18 23,5 30,5 42
depth
Diameter of clearance
df ≤ [mm] 7 9 12 14 7 9 9 12 12 14 18 22
hole in the fixture
Max. torque moment Tinst [Nm] 4 8 15 35 4 8 8 15 15 35 60 100
a) With anchor size M10x30 only threaded rod is to be used.
Installation equipment
Anchor size M6 M8 M10 M10 M12 M16
Rotary hammer for setting TE 1 – TE 3 TE 16 – TE 50
Machine setting tool HSD-M 6x25/30 8x25/30 10x25/30 10x40 12x50 16x65
HSD-G
Hand setting tool 6x25/30 8x25/30 10x25/30 10x40 12x50 16x65
HSD-M
Other tools hammer, torque wrench, blow out pump

Setting paramaters
Hilti technical data ETA-02/0032, issued 2015-01-07
M10x25

M12x25

M10x30

M10x40

M12x50

M16x65

M20x80
M6x25

M8x25

M6x30

M8x30

Anchor size M8x40

Minimum base material
hmin [mm] 100 100 100 100 100 100 100 100 100 100 130 160
thickness

Minimum spacing and smin [mm] 60 60 60 60 60 60 80 60 80 125 130 160

minimum edge distance
HKD-S (R) / HKD-E (R) cmin [mm] 88 88 88 88 105 105 140 105 140 175 230 280

Minimum spacing smin [mm] 80 80 80 80 60 60 80 60 80 125 130 160

HKD c ≥ [mm] 140 140 140 140 105 105 140 105 140 175 230 280
Minimum edge distance cmin [mm] 100 100 100 100 80 80 140 80 140 175 230 280
HKD s ≥ [mm] 150 150 150 150 120 120 80 120 80 125 130 160
Critical spacing and scr,sp [mm] 200 200 200 200 210 210 280 210 280 350 455 560
edge distance for
splitting failure HKD ccr,N [mm] 100 100 100 100 105 105 140 105 140 175 227 280
Critical spacing and
edge distance for scr,N [mm] 80 80 80 80 90 90 120 90 120 150 195 240
concrete cone failure
HKD / HKDS-(R) / ccr,N [mm] 40 40 40 40 45 45 60 45 60 75 97 120
HKD-E(R)
Critical spacing and
scr,sp [mm] 176 176 176 176 210 210 280 210 280 350 455 560
edge distance for
splitting failure
ccr,N [mm] 88 88 88 88 105 105 140 105 140 175 227 280
HKD-S(R) / HKD-E(R)
For spacing (edge distance) smaller than critical spacing (critical edge distance) the design loads have to be
reduced.
Setting instruction

*For detailed information on installation see instruction for use given with the package of the product.
Setting instruction
1. Drilling 2. Cleaning

3. Inserting the anchor 4. Setting tools

5. Inserting the tools 6. Inserting the tools

7. Attaching the belonging washer