CC231

VELAN CAST STEEL API 594 SWING CHECK VALVES

CAST CARBON, STAINLESS OR ALLOY STEEL
NPS 2–48 (DN 50–1200), ASME CLASSES: 150–1500

STANDARD MATERIALS Design features

PART MATERIALS l Body and cover.
Body(1) WCB WC6 WC9 CF8M Precision machined castings.
CoCr alloy CoCr alloy CoCr alloy CoCr alloy Exclusive: Disc shaft does not penetrate body.
(1)(2)
Seat faced faced faced faced
l Body and cover joint.
CS F11 F22 F316
Accurately machined, fully-enclosed gasket
Hinge pin(1) SS 410 SS 316 (gasket materials on page 4).
Gasket(1) Spiral wound stainless steel/graphite
l Disc.
Cover stud Gr. B7 B16 B8M Cl. 2
Robust one-piece construction to withstand the severe
Cover nut Gr. 2H Gr. 7 Gr. 8M shock of check valve service. Hardfaced with 13Cr,
Cover(1) WCB WC6 WC9 CF8M CoCr alloy, SS 316, or Monel, ground and lapped to
a mirror finish. Sizes NPS 2–6 (DN 50–150) may have
Washer Commercial
solid CA 15 (13Cr) disc. SS 316 disc with CoCr alloy
CA 15 or CA 15 or CA 15 or facing also available.
Disc(1) 13Cr faced 13Cr faced 13Cr faced CF8M
WCB WC6 WC9 l Disc assembly.
Disc hanger WCB WC6 WC9 CF8M Non-rotating disc is fastened securely to disc hanger
with a lock nut and cotter pin. Disc hanger is supported
Disc nut Gr. 2H Gr. 4 Gr. 8M
on a sturdy disc carrier hinge pin of excellent bearing
(1) Other materials available. qualities. All parts are accessible from top for easy
(2) Hardfaced. servicing.
l Flanges:
For Forged steel check valves, ASME Classes 900–2500 ASME Classes 150–300: 1⁄16” raised face.
See our on-line catalog (CAT-PS) at www.velan.com. ASME Classes 600–1500: ¼” raised face.
Finish 125–250 AARH for all valves.

16 Velan reserves the right to change this information without notice. © 2018 Velan Inc. All rights reserved.
DESIGN SPECIFICATIONS
ITEM APPLICABLE SPECIFICATION CLASS FIGURE NUMBER CLASS FIGURE NUMBER
General design API 594
150 0114C 900 7114C
Wall thickness API 594
300 1114C
Pressure–temperature rating ASME B16.34 1500 3114C
600 2114C
Face-to-face dimensions for butt weld
ASME B16.10
and flanged valves
D
Flange design ASME B16.5
Butt welding design ASME B16.25
Materials ASTM B

Other sizes on C
See page 22 and 23 for valve weights and CVs. application.

CHECK VALVE DIMENSIONS

SIZE ASME CLASS 150 ASME CLASS 300 ASME CLASS 600 ASME CLASS 900 ASME CLASS 1500
NPS
DN A B C D A B C D A B C D A B C D A B C D
2 8 5.75 2 6.75 10.50 6 2 6.75 11.50 6.25 2 6.75 14.50 9.50 1.88 8.63 14.50 9.50 1.88 8.63
50 203 146 51 171 267 152 51 171 292 159 51 171 368 241 48 219 368 241 48 219
21⁄2 8.50 6.25 2.50 6.75 11.50 6.25 2.50 6.75 13 6.50 2.50 7.50 16.50 10 2.25 9.25 16.50 10 2.25 9.25
65 216 159 64 171 292 159 64 171 330 165 64 191 419 254 57 235 419 254 57 235
3 9.50 7.75 3 8.50 12.50 7.75 3 8.50 14 8.75 3 9.75 15 10.50 2.88 10.50 18.50 11.50 2.75 10.50
80 241 197 76 216 318 197 76 216 356 222 76 248 381 267 73 267 470 292 70 267
4 11.50 8.75 4 10.25 14 8.75 4 10.25 17 9.25 4 12 18 11.75 3.88 12.25 21.50 12 3.63 12.25
100 292 222 102 260 356 222 102 260 432 235 102 305 457 299 99 311 546 305 92 311
6 14 10.75 6 12.50 17.50 10.75 6 12.50 22 11.50 6 15.75 24 15 5.75 15.25 27.75 16.50 5.38 16
150 356 273 152 318 445 273 152 318 559 292 152 400 610 381 146 387 705 419 137 406
8 19.50 12.75 8 15.75 21 12.75 8 15.75 26 13.50 7.88 15.75 29 19.25 7.50 18.38 32.75 21 7 20.75
200 495 324 203 400 533 324 203 400 660 343 200 400 737 489 191 467 832 533 178 527
10 24.50 15.50 10 18.50 24.50 16.25 10 18.50 31 16.75 9.75 19.50 33 21.98 9.38 22.25 39 23.93 8.75 22.75
250 622 394 254 470 622 413 254 470 787 425 248 495 838 558 238 565 991 608 222 578
12 27.50 17 12 20.50 28 17 12 20.50 33 18.50 11.75
22.50 – – – – – – – –
300 699 432 305 521 711 432 305 521 838 470 298 572
14 31 19.63 13.25 23 33 19.63 13.25 23 35 20.93 12.88
26.25 – – – – – – – –
350 787 499 337 584 838 499 337 584 889 532 327 667
16 34 22 15.25 26.50 34 22.50 15.25
26.50 39 23.38 14.75
28.25 – – – – – – – –
400 864 559 387 673 864 572 387 673 991 594 375 718
18 38.50 25 17.13 28.50 38.50 25 17.13
28.50 43 28.67 16.50
31.50 – – – – – – – –
450 978 635 435 724 978 635 435 724 1092 728 419 800
20 38.50 26.50 19 31.50 40 26.50 19 31.50 47 27.12 18.25 35.25 52 34.95 17.50 37.25 – – – –
500 978 673 483 800 1016 673 483 800 1194 689 464 895 1320 887 444 946 – – – –
24 51 31.25 23.25 37 53 31.25 23.25 37 55 35.69 22 40.25 – – – – – – – –
600 1295 794 591 940 1346 794 591 940 1397 907 559 1022 – – – – – – – –
26 51 32.63 25 37.25 – – – – 57 38.49 23.75 44 – – – – – – – –
650 1295 829 635 946 1448 980 603 1118
28 57 36.55 27 42 59 36.55 27 42 – – – – – – – – – – – –
700 1448 928 686 1067 1499 928 686 1067
30 60 36.89 29.25 44.50 – – – – – – – – – – – – – – – –
750 1524 937 743 1130
32 64 40.30 30.75 47.25 – – – – – – – – 70 47.56 25.25 50 – – – –
800 1626 1026 781 1200 1778 1280 641 1270
34 – – – – 64 42.38 32.75
48.75 – – – – – – – – – – – –
850 1626 1076 832 1238
36 77 41.78 35.25 53 – – – – – – – – – – – – – – – –
900 1956 1061 895 1346
38 80 47.01 36.63 53 – – – – – – – – 81.50 50.38 30 57 – – – –
950 2032 1194 930 1346 2070 1280 762 1448
42 78 49.72 37.88 63.50 78 53.22 37.88
63.50 – – – – – – – – – – – –
1050 1981 1263 962 1613 1981 1352 962 1613
48 94 55 46 61 – – – – – – – – – – – – – – – –
1200 2388 1397 1168 1549

Velan reserves the right to change this information without notice. © 2018 Velan Inc. All rights reserved. 17
 BYPASSES
AVAILABLE FOR ALL VELAN CAST STEEL VALVES IN ACCORDANCE WITH MSS-SP45 - SERIES A
API 600 GLOBE (Note: Dimensions are in inches) API 600 GATE (Note: Dimensions are in inches)
SIZE CLASS 150 CLASS 300 CLASS 600 SIZE CLASS 150 CLASS 300 CLASS 600

Bypass

Bypass

Bypass
Bypass

Bypass

Bypass

Elbow

Elbow

Elbow
Elbow

Elbow

Elbow
NPS DN A B A B A B NPS DN A B A B A B

3 80 /
1 2 13.00 /
1 2 6.38 /
1 2 11.50 /
1 2 6.13 /
1 2 13.00 /
1 2 8.25 3 80 /
1 2 10.50 /
1 2 4.75 /
1 2 12.25 /
1 2 6.25 /
1 2 12.31 /
1 2 6.25
4 100 /
1 2 13.00 /
1 2 7.50 /
1 2 16.50 /
1 2 7.00 /
1 2 15.00 /
1 2 9.50 4 100 /
1 2 13.00 /
1 2 5.63 /
1 2 13.00 /
1 2 6.50 /
1 2 14.00 /
1 2 6.50
6 150 3 /4 11.13 3 /4 11.00 3 /4 14.75 3 /4 11.00 3 /4 13.00 3 /4 11.00 6 150 3 /4 14.00 3 /4 6.13 3 /4 14.00 3 /4 9.00 3 /4 15.00 3 /4 9.00
8 200 3 /4 11.50 3 /4 14.00 3 /4 13.00 3 /4 14.00 3 /4 13.00 3 /4 11.25 8 200 3 /4 17.00 3 /4 6.81 3 /4 17.00 3 /4 10.00 3 /4 17.38 3 /4 10.00
10 250 1 18.00 1 7.69 1 18.00 1 11.00 1 18.50 1 11.00
10 250 1 18.00 1 14.88 1 18 1 15.00 — — — —
12 300 1 18.00 1 8.13 1 18.00 1 12.50 1 18.50 1 12.50
12 300 1 18.00 1 19.00 1 18 1 18.00 — — — —
14 350 1 23.00 1 9.00 1 18.50 1 16.00 1 18.50 1 19.13
14 350 1 18.00 1 19.50 1 18 1 19.50 — — — — 16 1 24.00 1 10.00 1 18.50 1 15.50 1 20.50 1 20.00
400
16 400 1 18.00 1 24.00 1 18 1 24.00 — — — — 18 450 1 26.63 1 12.00 1 19.50 1 14.00 1 20.50 1 24.00
20 500 1 26.63 1 12.00 1 19.50 1 16.00 1 20.50 1 24.00
24 600 1 28.75 1 12.25 1 22.50 1 18.25 1 22.50 1 32.00
30 750 1 33.63 1 14.00 1 26.00 1 24.00 1 27.00 1 36.00
34 850 — — — — — — — — — 28.00 1 42.38
36 900 1 34.00 1 15.25 1 28.00 1 50.00 1 30.00 1 35.00
38 950 — — — — — — — — — 31.00 1 47.38
40 1000 — — — — — 32.00 — 45.00 — 32.00 1 50.50
42 1050 — — — — — 32.00 — 45.00 — — — —
44 1100 — — — — — — — — — 35.00 — 50.00
50 1250 — — — — — — — — — 39.00 — 61.75
60 1500 1 44.00 1 24.00 — — — — — — — —

FLANGES, WEIGHTS, AND Cv FLOW COFFICIENTS

API 600 CAST STEEL VALVES Raised
CLASS 150 face
DRILLED AND FACED AS FOLLOWS

Bolt circle
diameter

diameter
Flange
ASME B 16.5 and B16.47(1)
(Note: Dimensions are in inches and weights in pounds)

DIMENSIONS IN INCHES WEIGHT IN LBS. CV

ASME FLOW COEFFICIENTS
CLASS SIZE FLANGE BOLT CIRCLE HOLE QTY. DIAM. GATE GLOBE SWING
NPS DN DIAM. DIAM. DIAM. HOLES BOLTS BW FL BW FL BW FL GATE GLOBE CHECK
2 50 6.00 4.75 0.75 4 5
⁄8 42 48 48 55 31 40 260 35 95
2 ⁄ 2 65
1
7.00 5.50 0.75 4 5
⁄8 50 59 54 58 35 44 420 60 150
3 80 7.50 6.00 0.75 4 5
⁄8 67 78 82 102 59 78 625 92 220
4 100 9.00 7.50 0.75 8 5
⁄8 97 117 120 152 98 121 1150 180 410
6 150 11.00 9.50 0.88 8 3
⁄4 180 198 240 280 179 212 2650 430 950
8 200 13.50 11.75 0.88 8 3
⁄4 278 319 405 435 314 360 4850 810 1750
10 250 16.00 14.25 1.00 12 7
⁄8 456 515 500 550 513 586 7750 1400 2800
12 300 19.00 17.00 1.00 12 7
⁄8 646 738 1050 1200 602 823 11,500 1950 4100
14 350 21.00 18.75 1.13 12 1 875 954 1700 1850 765 960 14,000 2500 6200
16 400 23.50 21.25 1.13 16 1 1120 1200 2300 2500 1120 1300 19,000 3400 8400
18 450 25.00 22.75 1.25 16 11⁄ 8 1485 1570 2640 2850 1450 1660 24,000 4500 11,000
20 500 27.50 25.00 1.25 20 11⁄ 8 1825 1910 — — 1700 2050 31,000 — 13,500
150 2624(1) 600 32.00 29.50 1.38 20 1 ⁄4 2870 2960 7035 7403 2900 3300 45,000 6580 20,000
1

1 /16 650 34.25 31.75 1.38 24 1 ⁄4

1
3600 3700 — — 3600 4000 53,000 — 23,500
28 (1) 700 36.50 34.00 1.38 28 11⁄4 4400 4500 — — 4300 5000 62,000 — 28,000
RAISED 30 (1) 750 38.75 36.00 1.37 28 11⁄4 4705 4750 — — 6300 7000 73,000 — 33,000
FACE 32 (1) 800 41.75 38.50 1.63 28 11⁄ 2 5800 6000 — — 6000 6600 81,000 — 36,245
34(1) 850 43.75 40.50 1.63 32 11⁄ 2 — 6000 — — — — 92,500 — —
36 (1) 900 46.00 42.75 1.63 32 11⁄ 2 6500 6850 — — 8500 9500 108,000 — 48,000
38 (1) 950 48.75 45.25 1.63 32 1 ⁄2
1
8857 9674 — — — — 115,000 — —
40 (1) 1000 50.75 47.25 1.63 36 11⁄ 2 8400 9000 — — — — 130,000 — —
42 (1) 1050 53.00 49.50 1.63 36 11⁄ 2 10,000 11,000 — — — — 142,000 — —
46 (1) 1150 57.25 53.75 1.63 40 11⁄ 2 14,000 15,719 — — — — 171,000 — —
48 (1) 1200 59.50 56.00 1.63 44 11⁄ 2 14,000 15,000 — — — — 190,000 — —
50 (1) 1250 56.81 54.56 1.25 44 11⁄ 8 — 8775 — — — — 198,000 — —
54 (1) 1350 66.25 62.75 1.88 44 1 ⁄4
3
21,000 23,000 — — — — 238,000 — —
56(1) 1400 68.75 65.00 1.88 48 13⁄4 — 20,000 — — — — 260,000 — —
60 (1) 1500 73.00 69.25 1.88 52 13⁄4 22,600 26,600 — — — — 300,000 — —
64(1) 1600 — — — — — — 29,043 — — — — 340,000 — —
(1) NPS 26 (DN 650) and up: ASME B16.47 Series A (MSS-SP– 44). For Series B (API 605) contact the factory.

30 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.

CAT-CSV-09-14.indd 30 2014-10-28 3:17 PM

 How to order cast steel gate, globe, and check valves
Type of connection Size of connection Pressure rating Valve type Body/bonnet style Body material Trim material

A B C D E F G
— —
F 1 0 — 0 0 6 4 C — 0 2 T Y
Example: Flanged NPS 3 (DN 80) Class 150 cast carbon steel full bore gate valve with TY trim.

The figure numbers shown on this key are designed to cover essential features of Velan valves. Please use figure numbers to ensure
prompt and accurate processing of your order. A detailed description must accompany any special orders.

A TYPE OF CONNECTION G TRIM (standard trims)

Seat API Bellows (3)
P Flanged B16.47 series B Code Wedge/disc surface (2) Stem
A Special D DIN Flanged surface (2) Number (if applicable)
(API 605)
B Butt weld E Welded studs (butt weld) R Flanged ring joint MS CoCr alloy (4) CoCr alloy (4) 316 16 321

Standadrd
C Combination F Flanged B16.5 (B16.47 series A) U Undrilled flanges MY CF8M or 316 CoCr alloy (4) 316 12 321
TS CoCr alloy (4) CoCr alloy (4) 13 Cr (410) (5) 5 321
B SIZE OF CONNECTION TY 13 Cr (410 or CA15) CoCr alloy (4) 13 Cr (410) 8
Customers have the choice of specifying valve size as part of the valve figure number 13 Cr (410 or CA15) 13 Cr 410
NA CoCr alloy (4) 8
(B) using the numbers below, or indicating valve size separately. HRC 22 max. HRC 22 max.
Sizes shown in NPS (DN) NB CF8M CoCr alloy (4) 316 12 321
EXAMPLES: NC Monel CoCr alloy (4) Monel 11 Hastelloy C

NACE service (7)

F10-0064C-02TY (valve size is part of figure number) ND CoCr alloy (3 CoCr alloy (3 630 (H1150M) 5 (8)
3 (80) F-0064C-02TY (valve size is shown separately) 13 Cr 410
NE CoCr alloy (4) CoCr alloy (4) 5
HRC 22 max.
08 2 (50) 14 6 (150) 21 18 (450) 30 30 (750) 42 42 (1050) 56 56 (1400) (4)
NF CoCr alloy CoCr alloy (4) Same as body
09 2½ (65) 15 8 (200) 22 20 (500) 32 32 (800) 44 44 (1100) 60 60 (1500)
NG CoCr alloy (4) CoCr alloy (4) 316 16
10 3 (80) 16 10 (250) 23 22 (550) 34 34 (850) 46 46 (1150) 64 64 (1600)
NN CF8M CoCr alloy (4) 316 12
11 3½ (90) 18 12 (300) 24 24 (600) 36 36 (900) 48 48 (1200) 99 Special
NX Monel Monel Monel 9
12 4 (100) 19 14 (350) 26 26 (650) 38 38 (950) 50 50 (1250)
NY CoCr alloy (4) CoCr alloy (4) XM-19 16 (9)
13 5 (125) 20 16 (400) 28 28 (700) 40 40 (1000) 54 54 (1350)
AS CoCr alloy (4) CoCr alloy (4) 321 16 (10) 321

C PRESSURE RATING AY CF8C/F321 CoCr alloy (4) 321 12 (10) 321

CC Alloy 20 Alloy 20 Alloy 20 13
0 150 1 300 2 600 3 1500 7 900 X Butt weld
ES CoCr alloy (4) CoCr alloy (4) 347 16 (10)
D VALVE TYPE EY CF8C/F347 CoCr alloy (4) 347 12 (10)
(4)
01 Flow control 07 Stop globe 09 Needle 99 Secial HC Hastelloy C CoCr alloy Hastelloy C Hastelloy C
HM HF-acid trim HF-acid trim HF-acid trim
06 Full port gate 08 Stop check 11 Swing check
MF CF8M or 316 w/ Teflon insert (6) CoCr alloy (4) 316 12
(4)
MH CoCr alloy CoCr alloy (4) 316 16 Hastelloy C
E BODY/BONNET STYLE
MN CoCr alloy (4) CoCr alloy (4) 316 16 Inconel 625
4 Vertical A Special
MX CF8M 316 316 10
C Bolted bonnet (cast)
13Cr (410 or CA15) (4)
E Extended bonnet (cryogenic) TF CoCr alloy 13 Cr (410) 8
w/ Teflon insert (6)
V Cast bolted bonnet bellows seal TH CoCr alloy (4)
CoCr alloy (4)
13 Cr (410) (5)
5 Hastelloy C
TN CoCr alloy (4) CoCr alloy (4) 13 Cr (410) (5) 5 Inconel 625
F BODY MATERIAL (1)
XS CoCr alloy (4) CoCr alloy (4) Monel
01 Special 09 C12 19 Monel M35 31 LCC
XX Monel Monel Monel 9
02 WCB 11 CF8 23 Alloy 20 34 C12A (F91)
XY Monel CoCr alloy (4) Monel 11
03 WC1 12 CF3 25 LCB 38 LC1
(2) Base material is either the same as the body or solid trim at manufacturer’s option.
04 C5 13 CF8M 27 LC3 39 LC2
(3) Bellows material shown as standard, Inconel can be used in lieu of 321 and Hastelloy C in lieu of Inconel,
05 WC6 14 CF3M 28 CG8M 46 GS-C25N where design and/or pressure class applicable.
(4) CoCr alloy refers to cobalt-chrome alloys in Grade 6 (e.g. AWS CoCr-A, UNS 30006 & 30106) or Grade 21
06 WC9 15 CF8C 29 CG3M
(e.g. AWS CoCr-E, UNS 30021).
(1) Pressure-containing valve components which may include body, bonnet, cover and body end. (5) 616HT manufacturer’s standard. (F91 and C12A only).
(6) Inserts may be in seat or wedge at manufacturer’s option.
(7) Valves with "NACE" figure numbers will meet the material requirements of NACE MRO103 and MRO175/ISO
15156. It is the equipment user's responsibility to ensure that the materials are suitable for the intended
Note: CoCr alloy as used throughout this catalog refers to cobalt chrome service.
(8) 630 SS is a Precipitation - Hardenable Stainless Steel (Also referred to as 17-4 PH stainless steel)
hardfacing alloys as supplied by Kennametal Stellite™, and other Has superior Mechanical properties and adequate corrosion resistance when compared to 410 SS.
approved manufacturers. (9) XM-19 is an austenitic stainless steel known for its superior mechanical properties and corrosion
resistance compared to 316 SS.
(10) An austenitic stainless steel which has comparable mechanical properties and corrosion resistance
For a more detailed list of available trims, contact the factory compared to 316.
or visit our web site at www.velan.com.

Velan reserves the right to change this information without notice. © 2018 Velan Inc. All rights reserved. 27