Scribd
Upload
19 views5 pages

X ST GR Data Sheet Technical Information ASSET DOC 7304093

Uploaded by

Matt Thompson

This document provides product data and installation information for X-ST-GR stainless steel threaded studs for fastening to steel. Key details include: - The studs are made of CrMnMo alloy (P558) shank and A4 (316) stainless steel threaded sleeve. - They are recommended for applications like base plates, installation rails, and facade brackets. - Installation guidelines specify a minimum base material and fastened material thickness, as well as edge and spacing distances when positioning fasteners. - Recommended tightening torques and setting depth ranges are provided for quality control of installations.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

X ST GR Data Sheet Technical Information ASSET DOC 7304093

Uploaded by

Matt Thompson
19 views5 pages
This document provides product data and installation information for X-ST-GR stainless steel threaded studs for fastening to steel. Key details include: - The studs are made of CrMnMo alloy (P558) shank and A4 (316) stainless steel threaded sleeve. - They are recommended for applications like base plates, installation rails, and facade brackets. - Installation guidelines specify a minimum base material and fastened material thickness, as well as edge and spacing distances when positioning fasteners. - Recommended tightening torques and setting depth ranges are provided for quality control of installations.

Original Description:

X-ST-GR-Data-Sheet-Technical-information-ASSET-DOC-7304093

Original Title

X-ST-GR-Data-Sheet-Technical-information-ASSET-DOC-7304093

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

This document provides product data and installation information for X-ST-GR stainless steel threaded studs for fastening to steel. Key details include: - The studs are made of CrMnMo alloy (P558) shank and A4 (316) stainless steel threaded sleeve. - They are recommended for applications like base plates, installation rails, and facade brackets. - Installation guidelines specify a minimum base material and fastened material thickness, as well as edge and spacing distances when positioning fasteners. - Recommended tightening torques and setting depth ranges are provided for quality control of installations.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
19 views5 pages

X ST GR Data Sheet Technical Information ASSET DOC 7304093

Uploaded by

Matt Thompson
This document provides product data and installation information for X-ST-GR stainless steel threaded studs for fastening to steel. Key details include: - The studs are made of CrMnMo alloy (P558) shank and A4 (316) stainless steel threaded sleeve. - They are recommended for applications like base plates, installation rails, and facade brackets. - Installation guidelines specify a minimum base material and fastened material thickness, as well as edge and spacing distances when positioning fasteners. - Recommended tightening torques and setting depth ranges are provided for quality control of installations.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 5

X-ST-GR

DATA SHEET
Stainless steel threaded stud
for fastening to steel

April 2021
X-ST-GR

X-ST-GR Stainless steel threaded stud for fastening to steel

Product data

Dimensions Material specifications


Shank: P558 (CrMnMo alloy)

[0.315"]
Ø8
fu ≥ 2000 N/mm2
Threaded sleeve: A4 (AlSI 316)
M8

Washers: polyethylene
Lg=9
9 12
[0.354"] [0.472"] Recommended fastening tools
25 DX 6 F8, DX 5 F8, DX 460 F8, DX 76 PTR
[0.894"]
• See fastener program in the next pages.
[0.315"]
Ø8

Approvals
M8

Lg=14
ICC ESR-2347
14 12
[0.551"] [0.472"] ABS
30 •N ot all information presented in this product data
[1.181"]
sheet might be subject to approval / certificate
­content. Please refer to approval / certificate for
further information.

Applications
Examples

Base plates for pipe Installation rails Facade brackets Special purpose
rings ­connections

Grating Checker plate


04/2021 www.hilti.group 2
X-ST-GR

Performance data

Recommended resistance under tension load, shear load and bending moment

Nrec Vrec Mrec


1.8 kN 1.8 kN 5.5 Nm

Condition:
• For safety-relevant fastenings sufficient redundancy of the entire system is required.

Arrangements to reduce or prevent moment on shank

FV

FN

Application recommendation
Base material thickness
tII ≥ 6 mm
tII

Fastened material thickness


tl ≤ Lg - twasher - tnut
tl ≤ 10mm for X-ST-GR M8/10 P8
tI

tl ≤ 5mm for X-ST-GR M8/5 P8

Fastener positioning in base material


c c s s
Edge distance: c ≥ 15 mm
Spacing: s ≥ 15 mm
tII

304/2021
www.hilti.group
X-ST-GR

Application limit

Tool type: DX 6 F8, DX 5 F8, DX 460 F8 Tool type: DX 76 PTR

20 20
18 18
16 16
Steel thickness, tII [mm]

Steel thickness, tII [mm]


14 14
12 12
10 10

8 8
6 6
350 400 450 500 550 600 650 700 350 400 450 500 550 600 650 700
Steel strength, Rm [N/mm2] Steel strength, Rm [N/mm2]

Corrosion information
• For fastenings exposed to outdoor environments in mildly corrosive conditions where
HDG coated parts are commonly specified or used.
• Not for use in atmospheres with chlorides (marine atmospheres) or in heavily polluted
environments (e.g. sulphur dioxide).
• For more details, please refer to following technical document: Hilti Corrosion
Handbook.

System recommendation
• For more details, please refer to the chapter Accessories and consumables
compatibility in the Direct Fastening Technology Manual (DFTM).

Cartridge recommendation

Base material Cartridge color (tool power level)


Tool type: Tool type:
DX 6 F8 DX 5 F8, DX 460 F8
Cartridge type: 6.8/11 M Cartridge type: 6.8/11 M
6 ≤ tII ≤ 8 mm titanium ■ (4-6) red ■ (1-3)
S235 8 < tII ≤ 20 mm titanium ■ (5-8), black ■ (1-3)
black ■ (6–7)
S275 6 ≤ tII ≤ 12 mm titanium ■ (5-8), black ■ (1-3)
black ■ (6–7)
S355 6 ≤ tII ≤ 8 mm titanium ■ (5-8), black ■ (1-3)
black ■ (6–7)

04/2021 www.hilti.group 4
X-ST-GR

Cartridge recommendation

Base material Cartridge color (tool power level)


Tool type:
DX 76 PTR
Cartridge type: 6.8/18 M
6 ≤ tII ≤ 8 mm yellow ■ (1-4)
S235
8 < tII ≤ 20 mm yellow ■ (1-4)
S275 6 ≤ tII ≤ 12 mm yellow ■ (1-4), red ■ (1-2)
S355 6 ≤ tII ≤ 8 mm red ■ (1)
8 < tII ≤ 10 mm red ■ (1-2)

• Tool power level adjustment by setting tests on site.


• Start tool energy selection with lowest recommended tool power level.
• Correct according requirement from chapter quality assurance.

Quality assurance
Setting depth control

Designation hNVS
X-ST-GR M8/5 P8 12.0 –15.0 mm
X-ST-GR M8/10 P8 17.0 –20.0 mm

Installation information

Trec Tightening torque: Trec = 8.5 Nm


tI

Fastener program
Item no. and description

Designation Item no. Lg


X-ST-GR M8/5 P8 2122209 9 mm
X-ST-GR M8/10 P8 2122460 14 mm
504/2021
www.hilti.group

You might also like