Scribd
Upload
38 views1 page

Roxas - MEng142 - Assignment Sheet 1

The document shows a displacement diagram for a cam and follower mechanism. The cam has an outstroke angle of 60 degrees, an outstroke dwell angle of 45 degrees, a return stroke angle of 90 degrees, and a return stroke dwell angle of 165 degrees. The roller diameter is 28 mm, the stroke is 50 mm, the base circle radius is 50 mm, and the follower offset is 10 mm. Key specifications of the cam and follower mechanism are displayed on a displacement diagram with scales.

Uploaded by

Luis Manuel Roxas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views1 page

Roxas - MEng142 - Assignment Sheet 1

The document shows a displacement diagram for a cam and follower mechanism. The cam has an outstroke angle of 60 degrees, an outstroke dwell angle of 45 degrees, a return stroke angle of 90 degrees, and a return stroke dwell angle of 165 degrees. The roller diameter is 28 mm, the stroke is 50 mm, the base circle radius is 50 mm, and the follower offset is 10 mm. Key specifications of the cam and follower mechanism are displayed on a displacement diagram with scales.

Uploaded by

Luis Manuel Roxas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Cam and Follower Displacement Diagram

Scale: 0.5:1
RISE DWELL RETURN DWELL
6 7
8
5
9
10
4
11
6
5
4
46.6506
3 12
49.0000 50.0000 Scale: 1:1
46.0000
3
37.5000 41.0000
13
2 1.0000 34.0000
2
25.0000 9.0000
3 2
25.0000
1 14
1
4 16.0000
12.5000
1
15
5
3.3494 4.0000
16
0° 60° 105° 195° 360°
6
Scale: 2.5 mm = 10°
Base Circle
Pitch Circle Outstroke angle (θO) = 60° Roller diameter = 28 mm
Outstroke dwell angle (θOD) = 45° Stroke (S) = 50 mm
Cam Profile 5.0000
Return stroke angle (θR) = 90° Base circle radius = 50 mm
7 Return stroke dwell angle (θOR) = 165° Follower offset = 10 mm
16
8 15
14
9 13
10 12
11
LUIS MANUEL L. ROXAS ASSIGNMENT 1 RATING
Department of Mechanical Engineering MEng 142 - Machine Elements II
Visayas State University CAM AND FOLLOWER Date Submitted: March 20, 2023

You might also like