878 Spec
878 Spec
VIII Supply and fixing No. 1. Box shall be of 16 modules & concealed mounting type of
concealed/surfac Galvanized sheet metal as per Roma model of Anchor make
e mounting box Cat No. 21736 or surface mounted type PVC unbreakable
with Tresa made with high impact plastic as per Roma model of
modular plate for Anchor make Cat No. 34567.
Sixteen number 2. Box plate with base frame in white glossy colour as per
modules. Roma model of Anchor make Tresa 16 module Cat No.
34680 or equivalent of approved make & ISI mark.
3. The board shall be fixed with suitable size & no. of GI
screws.
IX Supply, fixing, No. 1. The bell shall be suitable to work on 230 volt single phase
testing and AC supply.
commissioning of 2. The bell shall be as per Anchor’s cat. No.10489 or
Door Bell Ding equivalent ISI marked of reputed make.
dong type. 3. Supply shall be taken from the nearest available ceiling
rose.
4. The bell shall be connected with the supply point using
zero halogen flame retardant (ZHFR) PVC insulated &
sheathed multi strand three core copper conductor of
adequate size and capacity conforming to IS-694 of 2010
or latest and ISI marked, with proper workmanship.
X Supply, fixing & No. 1. The MCB shall be Double pole neutral isolated type of upto
commissioning of 40A capacity as per site requirement, confirming to
DP MCB of upto IS:8828/1996.
40A capacity as 2. MCBs shall be ISI/CE marked as per IS/IEC 60898-1, C
per site Curve, Rated short circuit breaking capacity Icn- 10KA, IP
requirement, in 20 protected terminals.
enclosure made of 3. The enclosure box shall be of thermoplastic polycarbonate
polycarbonate material with internally embedded polyurethane gasket,
thermoplastic confirming to IEC 60439-1,3.
material with 4. The box shall be weatherproof with IP 65 min., Impact
polyurethane strength IK08 min., self-extinguishing class II insulating
gasket, IP 65 material, fire/flame retardant, environment friendly,
weatherproof. nontoxic & safe.
5. The enclosure box shall be including neutral & earth
terminals, premolded knockouts & cable glands at top &
bottom, DIN rail, blanking strips for unused openings,
with transparent or opaque doors lockable type. Screws
used shall be made of stainless steel.
6. The box shall be compact in design and suitable for single
phase supply system.
7. The box shall be internally wired with copper crimping
socket of suitable size and rating.
8. MCB box shall be fixed on the wall / piller using proper
size and Nos. of screws.
9. The successful tenderer should submit delivery challan /
copy of original voucher of OEM / Authorized dealer to
EL-81-736-WA-81