ARABIAN CHEMICAL TERMINALS COMPANY L.L.

EPC for Greenfield Liquid Terminal at Khalifa

Port in Abu Dhabi (Phase- 1A/B)
DOCUMENT No.
MATERIAL APPROVAL REQUEST FOR
ACTAD-PH1-A001-PMD- Revision: A
TNK-MAR-0010 SEALANT

The Contractor is liable to complete the works in accordance

with Contract. The Review made by the COMPANY / PMC
does not relieve the CONTRACTOR of his Contractual
liabilities and / or responsibility to ensure or verify the
accuracy of the deliverables, WORK and existing features.

Surface preparation & application shall be in line

with Manufacturer recommendations.
Final acceptance subject to the effective
performance at site.
EPC for Greenfield Liquid Terminal at Khalifa Port in Abu Dhabi
(Phase- 1A/B) Project

Contract No: ACTAD-2020-001

MATERIAL APPROVAL REQUEST FOR SEALANT

A 10-05-2023 Issued for Review MP SVP CSK

REV. DATE REASON FOR SUBMISSION PRPD CHKD APPD

Amistad Project Number.: A02P3601 Page No.: 01 of 5

 ARABIAN CHEMICAL TERMINALS COMPANY L.L.C

EPC for Greenfield Liquid Terminal at Khalifa

Port in Abu Dhabi (Phase- 1A/B)
DOCUMENT No.
MATERIAL APPROVAL REQUEST FOR
ACTAD-PH1-A001-PMD- Revision: A
TNK-MAR-0010 SEALANT

Table of Contents Pages

1. PROJECT DESCRIPTION .............................................................................. 3
1.1 Introduction .......................................................................................... 3
1.2 Project Objectives ................................................................................ 3
1.3 Purpose of this Document.................................................................... 3

2. DEFINITIONS & ABBREVIATIONS................................................................ 4

2.1 Definitions ............................................................................................ 4
2.2 Abbreviations ....................................................................................... 4

3. ORDER OF PRECEDENCE............................................................................ 4

4. REFERENCE DOCUMENTS .......................................................................... 5

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND

PLAN FOR BUND A TANKS (ACTAD-PH1-A001-04DW1-0001) ................................ 5

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND

PLAN FOR BUND B TANKS (ACTAD-PH1-A001-04DW1-0002) ................................ 5

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND

PLAN FOR BUND C TANKS (ACTAD-PH1-A001-04DW1-0003) ................................ 5

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND

PLAN FOR BUND D TANKS (ACTAD-PH1-A001-04DW1-0004) ................................ 5

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND

PLAN FOR FIRE WATER TANKS (ACTAD-PH1-A001-04DW1-0005) ........................ 5

5. ATTACHEMENTS .......................................................................................... 5

• TECHNICAL DATA SHEET ............................................................................ 5

Amistad Project Number.: A02P3601 Page No.: 02 of 5

 ARABIAN CHEMICAL TERMINALS COMPANY L.L.C

EPC for Greenfield Liquid Terminal at Khalifa

Port in Abu Dhabi (Phase- 1A/B)
DOCUMENT No.
MATERIAL APPROVAL REQUEST FOR
ACTAD-PH1-A001-PMD- Revision: A
TNK-MAR-0010 SEALANT

1. PROJECT DESCRIPTION

1.1 Introduction

Arabian Chemical Terminals (ACT) is the developer and operator of the Bulk Liquid Chemical
Terminal (BLCT) facility located in Saudi Arabia. ACT erected and commissioned the first ever
commercial liquid chemical bulk storage terminal in Saudi Arabia. The facility was built in Yanbu
on the western coast, connecting the Red Sea. In July 2012, ACT commissioned its second tank
terminal in Jubail, on the Eastern coast of Saudi Arabia connecting the Arab Sea, the region’s
petrochemical hub. The tanks are leased to several third parties and allows for export and import
with distribution of liquid chemicals and minerals to the market in bulk form. Domestic distributions
are managed with road-tankers, ISOs, IBCs and drumming by 100% affiliate ICL.

Arabian Chemical Terminals Company LLC (ACTAD) hereafter referred to as COMPANY intent
to build, own and operate a Greenfield Bulk Liquid Terminal in Khalifa Port in Abu Dhabi, UAE to
support KIZAD, Zones Corp, ICAD industries, and the wider region’s liquid bulk logistics needs.

COMPANY has assigned M/s. Bilfinger Tebodin Middle East as Project Management Consultancy
for the Project.

COMPANY has awarded the Engineering, Procurement, Construction and Commissioning works
for the Project “GREENFIELD LIQUID TERMINAL AT KHALIFA PORT IN ABU DHABI (PHASE-
1A/B)” to M/s AMISTAD Oilfield Engineering Services L.L.C hereafter referred to as EPC
CONTRACTOR. EPC CONTRACTOR in turn assigned M/s. Tebodin Middle East Ltd, hereafter
referred as ENGINEERING CONSULTANT to provide the detailed engineering services for the
PROJECT.

1.2 Project Objectives

The objective of the PROJECT is to construct a bulk storage liquid terminal with all associated
facilities in Khalifa Port, UAE for export and import of liquid bulk products.

1.3 Purpose of this Document

The purpose of this document is to define the Material Approval Request for Sealant which is
to be used for Gap in between the Anchor Bolt & Drip ring Plate slot cut area in Carbon steel
Tanks and Stainless steel tanks for Green Field Liquid Terminal at Khalifa port Abu Dhabi
(Phase 1 A/B) Project.

Amistad Project Number.: A02P3601 Page No.: 03 of 5

 ARABIAN CHEMICAL TERMINALS COMPANY L.L.C

EPC for Greenfield Liquid Terminal at Khalifa

Port in Abu Dhabi (Phase- 1A/B)
DOCUMENT No.
MATERIAL APPROVAL REQUEST FOR
ACTAD-PH1-A001-PMD- Revision: A
TNK-MAR-0010 SEALANT

2. DEFINITIONS & ABBREVIATIONS

2.1 Definitions

COMPANY Arabian Chemical Terminals Company LLC (ACTAD)

PROJECT EPC for Greenfield Liquid Terminal at Khalifa Port in Abu Dhabi
(Phase- 1A/B) Project

PMC Bilfinger Tebodin Middle East Ltd. (BTME)

EPC CONTRACTOR AMISTAD Oilfield Engineering Services LLC

ENGINEERING Tebodin Middle East Ltd. (TME)

CONSULTANT

AGREEMENT Signature Agreement executed by the PARTIES, these Articles

and other documents part of Tender Package.

SHALL The use of the works “shall” indicate a mandatory requirement

SHOULD The use of the works “should” indicate a strong recommendation

to comply with the requirements of this document

2.2 Abbreviations

3. ORDER OF PRECEDENCE

The order of precedence shall be followed is:

• UAE Local statutory regulations

• International Codes & Standards

• Project Data sheet

• Project Specification

In case of conflict between this document and other specifications, codes or standards referred
in this document, the most stringent requirement as interpreted by COMPANY shall be
entertained and written COMPANY confirmation on the same shall be obtained before
proceeding. COMPANY decision shall be binding in this regard.

Amistad Project Number.: A02P3601 Page No.: 04 of 5

 ARABIAN CHEMICAL TERMINALS COMPANY L.L.C

EPC for Greenfield Liquid Terminal at Khalifa

Port in Abu Dhabi (Phase- 1A/B)
DOCUMENT No.
MATERIAL APPROVAL REQUEST FOR
ACTAD-PH1-A001-PMD- Revision: A
TNK-MAR-0010 SEALANT

4. REFERENCE DOCUMENTS

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND PLAN FOR BUND
A TANKS (ACTAD-PH1-A001-04DW1-0001)

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND PLAN FOR BUND
B TANKS (ACTAD-PH1-A001-04DW1-0002)

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND PLAN FOR BUND
C TANKS (ACTAD-PH1-A001-04DW1-0003)

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND PLAN FOR BUND
D TANKS (ACTAD-PH1-A001-04DW1-0004)

• GENERAL ARRANGEMENT DRAWING, ANCHOR CHAIR ELEVATION AND PLAN FOR FIRE
WATER TANKS (ACTAD-PH1-A001-04DW1-0005)

5. ATTACHEMENTS

• TECHNICAL DATA SHEET

Amistad Project Number.: A02P3601 Page No.: 05 of 5

Technical Datasheet
Create Date: 16.11.2017 - Seite 1/2

Flex 310 M® Stainless Steel

Gap filling up to max. 5 mm

Gap width up to max. 25 mm

Shelf life (+5°C to +25°C / +41°F to +77°F) 12 months

Shore A hardness (DIN 5355 / ASTM D 224) ± 5 45

Elongation at break (DIN 53504/ASTM D 2240) ± 5 280 %

Tensile strength of pure adhesive and sealant 3,1 N/mm²

Average tensile shear strength (DIN 53283 / ASTM D 12) 2,5 N/mm²

Tear strength (DIN 53515/ASTM D 1002) 11 N/mm²

Movement capacity max. 20 %

Building material category (DIN 412) B2

Temperature resistance -40 to +90 (briefly up to +120) °C

ISSA-Code 75.634.33

IMPA-Code 81 52 74

*Measured at 50% relative air humidity and +23°C

suitable for universal use
WEICON Flex 310 M Stainless-Steel adhesive and sealant is non-
corrosive, strong, overpaintable (wet in wet), sandable, resistant to Surface pre-treatment
aging and UV rays and is free of silicone, isocyanate, halogens or The surfaces must be clean and grease-free. Many surface
solvents. contaminants, e.g. oil, dust and dirt, can be removed with
WEICON Surface Cleaner. For heavily soiled metal surfaces, we
WEICON Flex 310 M Stainless-Steel has an ISEGA certificate and
recommend WEICON Cleaner Spray S; WEICON Sealant and
can be used as an adhesive in food technology.
Adhesive Remover is suitable for removing old paint or adhesive
Flex 310 M Stainless-Steel can also be used in all application residues. Most materials can be bonded well to themselves and
fields where the colour of the adhesive and sealant must match the among each other. For certain materials or extreme requirements,
surface material (e. g. stainless steel, aluminium, etc.). we recommend the use of an adhesion agent (primer). Detailed
information on this subject is contained in the Primer selection
WEICON Flex 310 M Stainless-Steel can be used in metal table. A mechanical surface pretreatment, e.g. sanding or sand-
construction, tank and apparatus engineering, food industry, in blasting, can considerably improve the adhesion.
kitchen and sanitary installations, ventilation and air conditioning
systems, and in all applications where silicones or products Processing
containing silicones are not suitable. Application methods

Professional cartridge gun for 310 ml cartridges, compressed air

Technical Data gun (we recommend a variation with piston rod), automatic dosing
Composition 1 C.-MS Polymer systems.
density 1,08 g/cm³
Joining the parts to be bonded
Viscosity adhesive pasty

Stability/Run-off (ASTM D 222) < 1 mm

To ensure optimal wetting, the parts must be joined before the first
skin has been formed on the adhesive (skin-overtime).
Processing temperatur +5 to +30 °C

Cure type By humidity Storage

When unopened and stored in a normal climate (+23°C and 50
Curing condition +5 to +40°C and 30% to 95% rel. humidity
% rel. humidity), WEICON elastic one-component adhesives and
Skin-overtime* 15 min. sealants have a shelf life of 12 months.
Cure speed (first 24h) 3 mm

Volume change (DIN 52451) -1 %

Note
The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application
conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical
tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications.

WEICON GmbH & Co. KG WEICON Middle East L.L.C. WEICON Inc. WEICON Kimya Sanayi Tic. Ltd. Şti. WEICON Romania SRL
(Headquarters) United Arab Emirates Canada Turkey Romania
Germany phone +971 4 880 25 05 phone +1 877 620 8889 phone +90 (0) 212 465 33 65 phone +40 (0) 3 65 730 763
phone +49 (0) 251 9322 0 [email protected] [email protected] [email protected] [email protected]
[email protected] www.weicon.ca www.weicon.com.tr

WEICON SA (Pty) Ltd WEICON South East Asia Pte Ltd WEICON Czech Republic s.r.o. WEICON Ibérica S.L.
South Africa Singapore Czech Republic Spain
phone +27 (0) 21 709 0088 phone (+65) 6710 7671 phone +42 (0) 417 533 013 phone +34 (0) 914 7997 34
[email protected] [email protected] [email protected] [email protected]
Technical Datasheet
Create Date: 16.11.2017 - Seite 2/2

Safety and health

When using WEICON products, the physical, safety technical,
toxicological and ecological data and regulations in our EC safety
data sheets (www.weicon.com) must be observed.

Available sizes:
13656310 Flex 310 M® Stainless Steel 310 ml

Accessories:
11202400 Sealant and Adhesive Remover, 400 ml
11207400 Surface Cleaner, 400 ml
11850200 Hand Protective Foam, 200 ml
13250000 Cartridge Cutter,
13250001 Cartridge Gun,
13250002 Cartridge Gun Special,
13250009 Compressed Air Cartridge Gun,
13550125 Primer M 100, 250 ml
13550225 Primer K 200, 250 ml
13550325 Primer S 300, 250 ml
13550425 Primer P 400, 250 ml
13559500 Smoothing Agent,
13955031 V-Joint Nozzle,

Note
The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application
conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical
tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications.

WEICON GmbH & Co. KG WEICON Middle East L.L.C. WEICON Inc. WEICON Kimya Sanayi Tic. Ltd. Şti. WEICON Romania SRL
(Headquarters) United Arab Emirates Canada Turkey Romania
Germany phone +971 4 880 25 05 phone +1 877 620 8889 phone +90 (0) 212 465 33 65 phone +40 (0) 3 65 730 763
phone +49 (0) 251 9322 0 [email protected] [email protected] [email protected] [email protected]
[email protected] www.weicon.ca www.weicon.com.tr

WEICON SA (Pty) Ltd WEICON South East Asia Pte Ltd WEICON Czech Republic s.r.o. WEICON Ibérica S.L.
South Africa Singapore Czech Republic Spain
phone +27 (0) 21 709 0088 phone (+65) 6710 7671 phone +42 (0) 417 533 013 phone +34 (0) 914 7997 34
[email protected] [email protected] [email protected] [email protected]