Design Critique :

Form Manipulation
Architectural examples that exhibit how they were able to incorporate
the discussed considerations in their form conceptualization and design

BAHATAN, AKEMI ANNE V.

AR 302-ARCH32S5
Architectural examples of form
manipulation incorporating
topographical considerations

Source: https://www.archdaily.com/989525/architecture-and-landscape-10-projects-integrated-in-the-topography
Ncaved House /
MOLD Architects
-Agios Sostis, Greece

"The need to create a

protected shelter, at
a location of
disarming view, but
openly exposed to
strong north winds,
led us to the decision
to drill the slope,
instead of arranging a
set of spaces in line
at ground level.".
Aguacates House
/ Francisco
Pardo Arquitecto
- Valle de Bravo, Mexico

"The main idea was to have a view

of the forest, but the client
also wanted to leave the avocado
field intact,” explains Pardo,
“which is how we arrived at the
decision of burying the house.”
Avocado trees sprout above the
concealed and unassuming
structure, which overlooks the
treetops of the forest. The
client, Pardo tells, practices
hang gliding, and so the pair
took a special interest in what
they deemed “the fifth facade” —
the view from the sky. The
intention to have a minimal
impact from that perspective
became the project’s defining
characteristic.
Residência GN / Miguel
Pinto Guimarães
Arquitetos Associados
- Itaipava, Brasil

"As the topography and the

structural design suggested a
building with a great
personality, we chose to make
the other annex disappear,
taking advantage of a gap to fit
the building into the terrain.
The garden roof is connected to
this land, eliminating the
presence of architecture for
those who come from the top and
only see the access stairs or
another gentle slope where you
can descend to enter the toy
house."
Ktima House /
Camilo Rebelo +
Susana Martins
- Antiparos, Greece

"The main idea of the project

was based in two elements:
the existing walls, at
different levels, and the
platforms created by those
walls. The elevations of the
two house levels are broken
lines that were created as
continuation of the existing
site walls. The topography
helps to dissimulate the
house."
Encaved Stone
Villa / Tsolakis
Architects
- Antiparos, Greece

"The project refers to a

vacation house that is
developed in multiple
levels, on a steep slope
on the island of
Antiparos. Οriented
towards the East, the plot
offers a direct view of
the island of Paros, as
well as visibility to the
islands of Cyclades
nearby."
House in Ribela
- Ribela, Spain

"Integrating the house

into the landscape is a
design decision. The plot
forms part of the limit of
the rural nucleus and an
effort is made to minimize
its landscape impact. This
is a very anthropized
territory. The
agricultural terraces, so
common on the banks of the
Miño and Sil, showed us
how the insertion of the
house should be in the
topography."
The Lap Pool
House /
Aristides Dallas
Architects
- Tinos, Greece

"The house in Tinos, inspired

by the cavities and ledges of
the rocks, emerges from the
natural landscape as a man-
made cave, re-creating
spatial points of exposure
and introversion. The
entrance is found in the back
of the building, through an
earth crack, while different
cuts in the roof allow light
and air to enter the
building."
House in
Monsaraz / Aires
Mateus
-Monsaraz, Portugal

"It uses the terrain to

cast a dome that covers
the social areas and is
the life centre of the
house. An inverted dome
intersects it and
creates an opening that
lights the space,
shaping its precise
geometry and limits."
Subterranean
Private Villa in
Antiparos / Tsolakis
Architects
- Antiparos, Greece

"The main idea is to integrate

the building into the landscape.
The variant volumes in
combination with the
subterranean parts of the house
correspond to the concept of
embracing the rocky topography.
Thus, the fragments οf the
design create a mild
architectural intervention,
emphasizing to the
transformation of the terrainl.
Three subeterranean dwellings
emerge through the design
process."
Aloni
- Antiparos, Greece

"The terrain is a natural valley

where two slopes meet. On the North-
South axis the slope rises between
two hills while on the East-West
axis the slope drops, opening up to
the sea view. Two long stone walls
bridge the hills, allowing the house
to nestle into the interior space,
maintaining the continuity of the
landscape that flows over it. This
simple strategy blurs the boundaries
of the house and makes its mass
inconspicuous within the island's
general panorama."
Architectural examples of form
manipulation incorporating energy
efficiency

Source: https://housely.com/energy-efficient-buildings/
 One Angel Square, Manchester, United Kingdom

Manchester’s One Angel Square is the headquarters of The Co-Operative

Group, and it stands at 15 stories tall. A heat recovery system helps
increase energy efficiency, as does One Angel Square’s rainwater and
greywater recycling systems. Low energy LED lights and IT setups and a
combined heat and power plant inside provide practical, cost saving
benefits. The building was rated as Outstanding by BREEAM, the Building
Research Establishment Environmental Assessment Method.
 David & Lucile Packard Foundation
Headquarters, Los Altos, California

The David & Lucile Packard Foundation headquarters is modern, beautiful, and
super energy efficient. It’s actually the largest Net-Zero Energy certified
building in the world. The California complex is made up of 95 percent recycled
materials from deconstructed buildings. It provides all of its energy needs and
has a total of 915 photovoltaic panels on its roof. One of the things that
makes the Foundation’s headquarters work so well is its effective use of
daylight and rooftop gutters that collect a massive 20,000 gallons of
rainwater, which is used for irrigation and the building’s bathrooms.
 One Embankment Place, London, United Kingdom

One Embankment Place in the UK has been around since the early 1990s and went
through a massive overhaul in the 2000s. As a result, it received BREEAM’s highest
recorded score worldwide in 2013. One Embankment Place proves that buildings can
successfully be refurbished and reused, instead of being torn down and tons of
materials being sent to the dump. The energy efficient London building has one of
the largest tri-generation systems in the world, which allowed it to reduce its
carbon emissions by an impressive 51 percent.
 Powerhouse Kjorbo, Oslo, Norway

Oslo’s Powerhouse Kjorbo was the recipient of the 2014 Norwegian Technology Award
because it’s so great at being energy efficient. The building is actually
comprised of two buildings that were renovated and then rebuilt from recycled
materials with the goal of sustainability in mind. The project was a success and
the new building’s energy consumption has been reduced by a whopping 90 percent.
Ground wells heat its radiators and serve as a water supply, and the building’s
unique charred wood exterior is not only eco-friendly but easy to maintain.
 Manitoba Hydro Place, Manitoba, Canada

Not many buildings in the world have received Platinum Certification from
LEED, but Manitoba Hydro Place has. The Canadian office tower is the most
energy efficient building on the North American continent, and it saves
over 70 percent more energy than other commercial and office buildings
due to its incredible design. A 115 meter solar chimney gives the
building passive ventilation while a double skin facade with motorized
computer-controlled vents make regulating temperature a cinch.
 The Edge, Amsterdam, Netherlands

The Edge in Amsterdam has the distinction of receiving the highest score ever
recorded by the BREEAM certification system. It’s also the first building in the
world to employ LED lights powered by Philips Ethernet. This means that workers in
the building can regulate the climate and lighting in their individual work spaces
by using an app on their smartphones — how amazing would it be if people around
the world could do this? In addition, The Edge is energy neutral and has a bevy of
rooftop solar panels.
 The Bullitt Centre, Seattle, Washington

Seattle’s Bullitt Centre opened in 2013 and has since become one of the greenest commercial
buildings in the entire world. It really is the epitome of energy efficient and derives 100
percent of its power from renewable energy. Not only is the Bullitt Centre naturally lit during
the daytime, it’s ventilated to make it super comfortable and increase the productivity of the
workers inside it. It’s a great example of what work offices will be in the coming years: smartly
designed, efficient, and attractive. Compared to the other commercial offices and buildings in
Seattle, the Bullitt Centre is 83 percent more energy efficient on average. As a bonus, it
provides a terrific view of the city’s famed skyline.
 New Orleans BioInnovation Center, New Orleans,
Louisiana

Not far from New Orleans’ fabulous French Quarter is the BioInnovation Center, a
hub for biotech startups that aims to bring innovation and economic empowerment to
the area. Its design is both elegant and smart, and the BioInnovation Center is
becoming a key part of the revitalization of the neighborhood that surrounds it.
 Empire State Building, New York City, New York

Not many people immediately think of sustainability or energy efficiency when they
look at the Empire State Building, but this world famous New York landmark certainly
is. $550 million was put into renovating the building and making it more green, which
allowed the Empire State Building to earn a LEED Gold Certification in 2011. The
revamp cut the building’s energy use and expenses by $4.4 million annually, and
within the next decade it’s expect to reduce its carbon footprint by at least 105,000
tons. One of the most daunting parts of making the Empire State Building more energy
efficient was replacing all 6,514 of its glass windows.
International Renewable Energy Agency Headquarters,
Abu Dhabi, United Arab Emirates

The International Renewable Energy Agency Headquarters is one of the most futuristic and energy
efficient buildings on the planet. It entered Abu Dhabi’s skyline in 2015 and has already won a
number of prestigious international awards for its innovative, sustainable design and features. Its
external screen maximizes light while also minimizing the amount of heat inside. The windows block 90
percent of solar radiation and the building’s rooftop has a photovoltaic system to help it produce
its own energy
Architectural examples of form
manipulation incorporating the selection
of structural system

Source: https://www.architecturaldigest.com/story/buildings-redefined-architecture-past-5-years
 Fondation Louis
Vuitton (204) by
Frank Gehry (Paris)
Due to its strict building codes, and architectural
pedigree, Paris is among the world's most difficult
places to successfully design modern architecture.
Yet, leave it to the most lyrical of all
starchitects, Frank Gehry, and his phenomenal
Fondation Louis Vuitton, to accomplish such a feat.
Completed in 2014, the vessel-shaped glass
structure sits among the trees and lawns of Paris's
Bois de Boulogne. The building is filled with
LVMH’s impressive art collection, with works
ranging from Kusama and Abramovi´c to Matisse and
Giacometti spread throughout the 126,000-square-
foot, two-and-a-half-story space. For his
inspiration, Gehry looked back to several great
designs of the 19th century. "I’ve always loved the
glass greenhouse buildings in French and British
gardens. When we were confronted with a site in the
Bois de Boulogne, glass seemed like the best way to
add a structure to the beautiful garden," says
Gehry. "Of course, in a museum structure, you can’t
hang paintings on glass, so we had to design a more
enclosed building inside the glass exterior." This
play between solid and glass works to perfection
within the verdant atmosphere of the Bois de
Boulogne. It's a structure that's both whimsical
and sturdy, much like the meandering paths and
endless row of trees that surround it.
 Shanghai Tower
(2015) by Gensler
(Shanghai)
Designed by Gensler and completed in 2015, the
2,073 foot-tall Shanghai Tower (pictured in
the center) has a seemingly endless list of
records: tallest building in China, second
tallest in the world, world's tallest
observation deck, and the world's second-
fastest elevator system. Yet, shockingly, that
list almost pales in comparison with the fact
that the firm's design of the building—an
asymmetrical form with rounded corners—saved
some $58 million in material cost versus a
traditional angular build of the same size.
"The tower’s asymmetrical form, its tapering
profile, and its rounded corners allows the
building to withstand the typhoon-force winds
that are common in Shanghai," says Xiaomei
Lee, Gensler's regional managing principal in
China, and project director of the Shanghai
Tower. "Using a wind tunnel test conducted in
a Canadian lab, Gensler refined the tower’s
form, which reduced building wind loads by 24
percent. The result came in the form of a
lighter structure, saving $58 million in costs
for required materials."
 432 Park Avenue
(2015) by Rafael
Viñoly (New York)
Rafael Viñoly's 432 Park Avenue is the tallest completed
residential building in the Western Hemisphere, and as
such, demands one's attention in a way that no
residential building ever has. Located in the heart of
midtown Manhattan, the 1,396 foot-tall skyscraper can be
seen from all five boroughs. Its silhouette dominates
New York's skyline from every angle—in cars, trains, and
airplanes alike—a fact that was not lost on the world-
renowned Uruguayan architect. "To make such a prominent
and lasting mark on the most iconic skyline in the world
is a great responsibility. From the start, I was aware
that it needed to have a timeless quality—as free as
possible of passing aesthetic fads," says Viñoly.
Proponents of the design will say that there's a certain
elegance to the all-white, uniform shape, while skeptics
argue it lacks character. Whatever the case may be, the
feat of engineering needed to build this structure has
taken architecture to a higher level. Or, as Viñoly
says, "The design simply expresses the structural
solution to an enormous engineering challenge, while
also reflecting the other defining urban feature of New
York, the city’s grid." The building is essentially six
separate structures built atop each other, with a
central, uninterrupted core that consists of the
elevator shafts and all the building's mechanical
services. Outside of this backbone, all the livable
space fills in the structure. While there has been some
criticism of Viñoly's design, there's no doubting the
fact that his vision has ushered in a new era of slender
super towers.
The Broad (2015) by Diller
Scofidio + Renfro in
collaboration with Gensler
(Los Angeles)
In many ways, the architects at Diller Scofidio + Renfro
are modern-day magicians. Take, for example, their
design of The Broad in Los Angeles. The structure itself
holds a nearly 2,000-piece collection of contemporary
art, making it, in theory, like any other museum in the
world. Yet, that's where the similarities abruptly end.
The 50,000-square-foot building acts as a seamless
buffer between the inside and outside world. "Most
museums are opaque to the street and inwardly focused.
The Broad uses a semi-porous system—which we dubbed 'the
veil'—to foster more of an urban interface," says
Elizabeth Diller, partner and cofounder of the New York–
based firm, DS+R. "The veil's porosity suggests two-way
vision. It tempts you from the street through its lifted
corner, while views from within the gallery are oblique
so visitors are not distracted, without being entirely
cut off from the world." This honeycomb-like design also
enhances the artwork housed within the structure, making
the striking exterior multifunctional in its aesthetics.
"The veil's walls are also engineered so that, despite
the movement of the sun, no direct sunlight will ever
penetrate the space. The cellular structure all around
acts like a sponge absorbing and transmitting light as
needed."
 The Oculus (2016) by
Santiago Calatrava (New
York)
Santiago Calatrava has built a reputation for
creating structures so dynamic, they appear
poised to take flight at any moment. And the
Spanish-born's design of the Oculus is no
exception. While the structure is built of
steel, concrete, stone, and glass, it takes
the shape of a bird, specifically a phoenix,
in mid-flight. The symbolism of a phoenix
rising from the ashes is immediate, as the
building is located mere feet from the
September 11th Memorial and Museum in downtown
Manhattan. But it's not just the symbolism,
it's also the design—the ability of visitors
to move with ease through a space that
connects 11 subway lines and countless retail
and office spaces—that makes this
transportation hub such an architectural
marvel. "I wanted to build a station that
anyone can easily find their way around. Why?
Because finding one’s way in a station is
essential," explains Calatrava. "The idea of
going underground through long escalators,
entering dim places, this is our everyday life
in New York. But does it have to be so dark?
No. I wanted to create a place that delivers
the people a sense of comfort through its
orientation, while also delivering a sense of
security by opening everything to the naked
eye." For anyone who has visited Calatrava's
Oculus, it's evident he's done this in spades.
 Elbphilharmonie Hamburg
(2017) by Herzog & de
Meuron (Hamburg)
In its most basic form, Herzog & de Meuron's design for
the Elbphilharmonie Hamburg is physical evidence that
adaptive reuse can be done to stunning, head-turning
effect. Glass completely covers the upper portion of
the structure, making it appear more like an avant-
garde ship than a space for musical performances.
Completed in 2017, the bottom half of building (on
which Elbphilharmonie Hamburg sits atop) has a history
that actually dates back further than that. The
foundation of Herzog & de Meuron's design is a brick
building that was a former warehouse built in 1963. The
location of this warehouse was significant, as it sat
along the mouth of the Elbe river in the geographical
heart of the city. When the warehouse, along with many
other older 19th-century brick buildings, became
derelict, a plan was put in place to transform these
industrial spaces into popular waterfront developments.
No one could have predicted the popularity of the
Elbphilharmonie Hamburg. Tickets are constantly sold
out for its musical performances (due in part to the
affordable value of tickets in comparison with other
philharmonics around the world). The interior of the
venue is also democratic in layout, meaning that all
2,100 seats are situated around the main stage, making
each of them equal in status and in their quality of
experience. Adding to the buildings all-people-being-
equal ethos, in March 2017, during the height of what
many referred to as the refugee crisis in Europe, the
Elbphilharmonie used its popularity in a positive way:
by presenting a festival dedicated to Syrian music and
culture that brought together residents and new
arrivals to the city.
Apple Park (2017) by
Foster + Partners
(Cupertino, California)
For some, Apple Park will always be remembered as
the final vision of the firm's inimitable founder,
Steve Jobs. For countless more, however, Apple's
latest headquarters will be considered the
crowning architectural achievement for how the
campus of a forward-thinking company should be
designed. Created by the firm Foster + Partners,
the 175-acre campus was the culmination of a dream
that Jobs had in 2004 while walking through
London's Hyde Park. It was while there that the
iconic founder decided to house his company in a
new environment where the barrier between building
and nature seamlessly disappeared. To fulfill that
lofty ambition, Jobs turned to Pritzker Prize–
winning architect Norman Foster. "In my first
meeting with Steve Jobs in 2009, he recalled the
region [of central California] being the fruit
bowl of America and the idea was born of re-
creating such a landscape as an integral part of
the concept," says Foster. "In this approach the
buildings and their setting are inseparable and
specific to the needs of Apple. Steve and I shared
a vision for the project; Apple Park is the result
of the coming together of two teams to ultimately
become one." This vision includes a main, ring-
shaped building that runs on fully sustainable
energy, much of which comes from the solar panels
that line the top of the spaceship-like structure.
CopenHill (2017) by Bjarke
Ingels Group (Copenhagen)

Bjarke Ingels, the founding partner and creative

director of Bjarke Ingels Group (BIG), is no
stranger to radical architecture. The 44-year-old
architect has a résumé that would satisfy
architects twice his age. Yet, it's the design of
CopenHill, a structure in his hometown of
Copenhagen, that displays the sheer genius of the
young architect. At its core, CopenHill is proof
that eco-friendly architecture can be accomplished
with high design. To that end, the eco-friendly
waste-to-energy power plant emits no toxins into
the atmosphere. Far from it. The structure can burn
400,000 tons of waste annually into enough clean
energy to power 60,000 homes in the area. But it's
not just about waste management—it's about having
fun too. While Denmark receives a healthy amount of
snow, the country is rather flat and not an ideal
terrain for ski lovers. BIG took that fact and used
it as an asset in its scheme. Atop the CopenHill
roof is a nearly 1,500-foot-long ski slope, which
is accessible through an elevator inside the
building. There are three paths for skiers: one for
beginners, another for intermediates, and, finally,
one for experts.
 National Museum of Qatar
(2019) by Jean Nouvel
(Doha, Qatar)
If the public was hoping to see the billions of dollars
of Western art the Qatari's had purchased in the past
few decades, then it would seem the construction of a
national museum in their country was a necessity. And
while that occurred in 2019, with the opening of
National Museum of Qatar, the many Picassos, Rothkos,
Pollocks, and Cézannes were nowhere to be found. What
the public may have gotten though, in the form of a
stunning new Jean Nouvel–designed building, might have
been even better. The 361,861-square-foot structure
contains the many artifacts, stories, and images—from
the discovery of oil to life by the Persian Gulf—that
encompass the creation of modern-day Qatar (a list of
the wings include: The Formation of Qatar, Qatar's
National Environments, and Qatar Today). Yet, many if
not all national museums around the world, in some
form, tout the history of their people from their
beginnings to modern times. What separates the National
Museum of Qatar from any other museum, of course, is
its revolutionary architecture. There are the facts
about the building which are easy to rattle off: The
exterior consists of 539 disks, with 76,000 patterned
cladding elements throughout; the interiors twist and
turn, with the ceiling rising and dipping, constantly
keeping visitors surprised through the eleven linked
galleries. That, however, is where any simple
explanation ends. What made Nouvel's task of designing
this museum so difficult is what was being asked of
him—to create a building that, by shape and formation,
would become the very embodiment of Qatari identity.
 The Shed (2019) by Diller
Scofidio + Renfro and
David Rockwell (New York)
In many ways, the goal of New York's new $475
million cultural center seems impossible: How does
anything, let alone a cultural center, entertain
jaded New Yorkers who believe they have seen it
all? Answer: Place a building on wheels so that it
can multiply into two while also providing
arguably the most diverse lineup of performances
the city has ever witnessed. The Shed, which
opened in the spring of 2019, starts as a static
200,000-square-foot cultural space. Yet, the
structure consists of an outer shell (made of
lightweight, luminescent ETFE panels) that sits on
a set of wheels connected to a short track. Once
activated by way of a 121-horsepower engine (the
same horsepower of a 2019 Toyota Prius), the shell
moves away from the main frame of the building, in
effect creating an entirely new building that is
part of the original one. "Often, flexible
buildings are generic in form. We wanted to make a
flexible building that can have a strong
architectural character," says Elizabeth Diller, a
partner at Diller Scofidio + Renfro, which as the
lead architecture firm worked with Rockwell Group,
the collaborating architects, in designing The
Shed. "Our goal was to create a building that
would be so flexible, it would adapt to a future
it does not now know. It would be so flexible, it
could even change its footprint."
 -end-
“I affirm that I have not given or received any unauthorized help in this activity and that this work is
my own.”