Cl/SfB

PRODUCT DATASHEET
PR

Bridgemaster®
COMBINED WATERPROOFING & SURFACING

DESCRIPTION  High mechanical strength

 Can be tailored to individual project requirements
 Trafficable within one hour
 Quality assured - applied only by Stirling Lloyd authorised and
trained contractors
SURFACE PREPARATION
All substrates must be clean, dry and structurally sound. They must
be free from laitance, oils and other surface contaminants.
Concrete
New concrete decks should be a minimum of fourteen days old. If
additives, cement replacement or curing agents have been used
please contact us.
All concrete decks must be prepared by suitable mechanical means
such as vacuum blasting to provide a sound surface.
Rapid repairs to damaged concrete can be made using Metaset®
rapid repair products.
Bridgemaster is a fast curing, waterproof, skid resistant wearing Where the use of a non-structural screed or a lightweight concrete
course for the protection of bridge decks, where light weight allied substrate is proposed, please seek advice from us first.
to durability is required. Based on Stirling Lloyd’s advanced resin
technology and extensive experience in the development of Steel
infrastructure waterproofing and trafficked surfaces, Bridgemaster All surfaces must be free from rust, dirt, scale and other
comprises an impermeable, flexible resin screed with an aggregate contaminants. The surface finish shall comply with Swedish
overscatter and durable sealer coat. Standard SIS 05 59 00 (1967) Sa 2.5.
APPLICATION
USES
Primer
Bridgemaster can be used to surface and protect a wide variety of
Concrete substrates must be primed using PAB1 Primer.
structures operating under a range of climatic environments and
Steel substrates must be primed with ZED S94 Primer.
traffic conditions, from light duty pedestrian structures to major
Please refer to the relevant datasheet for further information.
bridges and viaducts subject to heavy vehicular traffic. It is suitable
for application to concrete, steel and aluminium substrates. Bridgemaster
Bridgemaster is available in two standard grades: The standard application temperature range for Bridgemaster is 0°C
(32°F) to 35°C (86°F). For temperatures outside this range please
PD Grade – For pedestrian areas. A 4mm screed plus aggregate
contact Stirling Lloyd.
and sealer.
Bridgemaster is a three-part screed, supplied in pre-weighed
HD Grade – For vehicular trafficked areas. A 6mm screed plus quantities ready for on-site mixing. Application is by pouring and
aggregate and sealer. spreading using a toothed rake or trowel, followed by a spiked
roller.
Bridgemaster is designed for use on gradients up to 1:12. For
gradients greater than this please contact us. Once rollered the screed is blinded with dry aggregate.
Typical applications include: Once the screed has cured the excess aggregate should be
removed.
 Road Bridges  Loading Bays
 Bascule bridges  Footbridges A coat of SL Sealer Matt Clear is then applied to enhance
 Swing bridges  Walkways aggregate retention and help maintain a clean surface. The system
can be trafficked once the SL Sealer Matt Clear has fully cured.
 Roll-on/off ramps  Steps
 Marine structures  Stadium Spectator areas
COVERAGE

FEATURES Thickness Binder Aggregate Sealer

 Waterproof 6 mm 12.6 kg/m² 4-7 kg/m²

0.3-0.5
 High friction surface kg/m²
 Durable 4 mm 8.4 kg/m² 4-7 kg/m²
0.3-0.5
 Rapid cure even at low temperatures kg/m²
 Economical and easily maintained The binder coverage rate will vary with surface texture.
 Lightweight Aggregate and sealer consumption will vary depending upon the
 Aids composite action size of aggregate used.
 High bond strength to substrate

MA105 Bridgemaster Datasheet Issue 9

Page 1 of 2
 Cl/SfB

PRODUCT DATASHEET
PR

Bridgemaster®
COMBINED WATERPROOFING & SURFACING

AGGREGATES & COLOUR

The current aggregates acceptable for use are Chinese Bauxite,
Guyanan Bauxite and Green Granite. Use of any other aggregate is
prohibited unless approval has been granted by us. Please see our
Aggregate Price List for further details.
The Bridgemaster resin is available is black and neutral colours.
CLEANING
All tools and equipment should be cleaned with Stirling Lloyd
Solvent No.1 (Acetone) before the material is allowed to cure.
PACKAGING & STORAGE
Primer: 5 & 20kg kits
Screed: 24kg kits
Aggregate: 25kg bags (typically)
SL Sealer Matt Clear (Resin): 5 & 20kg
(BPO): 150g & 600g bags
All components of the Bridgemaster system should be stored in
cool, dry, protected conditions, out of direct sunlight and in
accordance with the relevant Health & Safety regulations. Storage
temperatures must not exceed 25oC. Do not store near naked
flames or foodstuffs.
Stored in unopened containers, under the correct conditions, the
components have a minimum shelf life of six months. If your
product is more than six months old you must contact us before
use.
ANCILLARIES
Stirling Lloyd produces a range of products to compliment the
Bridgemaster system. These include:

 Metaset Scratch Coat – a rapid cure, levelling screed.

 Metaset – a range of resin based rapid repair mortars.
 Safetrack® LM – a flexible, bright, abrasion resistant line
marking available in a range of colours.
 Sealants – a range of flexible sealants for all joints and cracks.
 Sentinel® - a range of mechanical joints.

HEALTH & SAFETY

Please refer to our Safety Data Sheets for further information.


GENERAL INFORMATION
Bridgemaster is one of a wide range of specialist waterproofing,
surfacing and repair materials manufactured and supplied by
Stirling Lloyd. If you require any further information on this or any
other of our products, please contact us or visit our website:
www.stirlinglloyd.com. ® BRIDGEMASTER, METASET, SAFETRACK & SENTINEL are registered
trademarks of Stirling Lloyd Polychem Ltd
© 2015 Stirling Lloyd Polychem Ltd

The information presented herein is accurate to the best of our knowledge. We pursue a
progressive research and development policy and reserve the right to alter any of the
details herein without notice. The information given must not be taken in any way to form
a specification. All technical properties quoted are from laboratory prepared samples. We
will not accept liability whatsoever arising out of the use of the information contained
herein.

Union Bank, King Street, Knutsford, Cheshire, WA16 6EF, England

Tel: +44 (0) 1565 633111 Fax: +44 (0) 1565 633555
E-Mail: [email protected]
Website: www.stirlinglloyd.com

MA105 Bridgemaster Datasheet Issue 9

Page 2 of 2