32pfl4764 f7 QSG Aen

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

4764 series

4664 series
32PFL4764
32PFL4664
24PFL4664
Product design and user interface are for
illustrative purposes only. Actual product
and user interface may vary.

Quick start guide


If you have any questions or need a detailed manual, please visit our support website at
www.philips.com/support
For further assistance, please call the customer support in your country or check the Philips website for
chat support.
To obtain assistance, contact Philips customer care center;
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands

Call us: Scan to call us: Chat with us: Scan to chat with us:

1-866-309-5962 http://tinyurl.com/y2e29xsq

What’s in the box

32PFL4764/ Quick start guide

32PFL4664: M4 x 0.709 ” (18 mm)


24PFL4664: M4 x 0.551 ” (14 mm)
AAA
AAA

TV TV remote with TV stands Screws Quick start guide


batteries

1  What you need (not included)

• Phillips screw driver •W


 ireless router • Internet connection •C
 omputer, tablet, or smartphone
(needed to connect your TV (needed for streaming) (needed for setup)
to the Internet)
• Roku account (needed for the Smart TV content)

For additional support, please see online owner’s manual at www.philips.com/support


Key things to know: A paid subscription or other payments may be required for some streaming channel content.
Channel availability is subject to change and varies by country.
2  Mount base onto TV

1 2 3 4

×2 Carefully lift and stand the


television or utilize a second person.
(For 32PFL4764/32PFL4664)

If you plan to wall mount your TV, refer to “Wall mount bracket kit” in this Quick start guide for recommended wall mount bracket kit.

3-1 Connections

USB port
Used to connect a USB flash drive to view personal
media or pause Live TV. A USB drive (16 GB or larger) is
required for the Live TV pause feature.

75 ohm cable / Antenna / Satellite box connection


Analog audio (L / R) input jacks

HDMI input jacks Digital audio (S/PDIF) output

* FInoraddition
HDMI 2 only
to normal HDMI and HDMI-DVI
To home theater or another digital audio system
Note: Use an optical (TOSLINK) to coaxial (RCA)
functionality, it outputs TV audio to an HDMI-ARC adapter (not included) for devices which only
compliant device, such as a home theater system. have a coaxial input.

Composite video input jack

3-2  Control panel


Control panel is located on the back of the TV.

1 Press to turn the TV on/select connected device. SOURCE

Press and hold to turn the TV off. 1


2 Press once for factory reset*.
RESET
*Please be aware that all settings will be reset to its factory defaults. 2
3 Remote control sensor 3
4  Connect to external devices
High quality
Blu-ray Disc™ or DVD player / Home theater system / Cable, satellite or IPTV box / Gaming console / PC / Digital camera /
Camcorder / Tablet

HDMI

HDMI cable HDMI

Or

Standard quality
DVD player / Home theater system / Cable, satellite or IPTV box / Video cassette recorder / Gaming console

Audio cable

Video cable

USB memory stick Soundbar or Home Theater without ARC

Digital option

See the Roku website for supported file


formats and resolutions. DIGITA
AUDIO
L

https://go.roku.com/rokumediaplayer
IN
(OPTIC
AL)

Caution
Disconnect the AC power cord before connecting devices.

5  Place batteries in remote


Power your TV remote by inserting the included batteries carefully matching (+) and (-) indicated inside
the battery compartment.
If your remote gets warm / hot during use, discontinue use and contact customer support immediately
at www.philips.com/support.

Tip
Always replace used batteries with two brand-new batteries from the same
manufacturer. Never use damaged batteries.
6  Plug in and turn on TV
Connect the AC power cord to the AC outlet. Press the power button on the TV’s remote control.

7  Follow the on-screen instructions

1. Once your Roku TV powers on, follow the on-screen instructions. Your Roku TV will walk you through initial setup and help
connect to your preferred wireless network.
2. Your TV will automatically detect wireless networks in your area. Have your network name and password handy and follow
the easy on-screen instructions.
If you are not ready to connect your TV to a wireless network, you can still use it as a regular TV by selecting “Connect to the
Internet later”.
3. Once connected your TV will automatically update with the latest software. This can take a few minutes to update.
Once you complete guided setup, your TV will automatically update with the latest software. Your new Philips Roku TV
automatically receives regular software updates in the background when it’s connected to the Internet. This allows it to give
you a better experience over time.

8  Activate your smart TV


You need a Roku account to activate your Roku TV and to access entertainment across thousands of streaming channels.

Your Roku account


Follow the on-screen instructions on your Roku TV. You will need to activate your Roku TV using your smartphone, tablet, or
computer to link to a Roku account. See more information below.
• Roku accounts are free, and while a valid credit card number is not required to create your account, providing your credit
card information makes renting and purchasing entertainment from the Roku Channel Store fast and convenient.
• If you choose to provide a payment method, you will be able to seamlessly rent content, download channels and subscribe
to services without having to enter your credit card information each time.
• A unique PIN can be added to the account to prevent unauthorized purchases.

Tip
Roku does not charge for activation support — beware of scams.
9  Connect antenna or cable (optional)
With the tuner built-in you can connect your TV to antenna or cable (free cable only, does not work with cable TV using a set-top
box) and enjoy over-the-air entertainment.

1. When the setup wizard is complete, select the Antenna TV tile from
the home screen.
2. Follow the on-screen instructions.
3. Whenever you want to watch local broadcast TV, select this tile.

Antenna TV tile

• User interface may vary.

Tip
While in the antenna TV input, you can use your remote to access additional features.
• D-Pad left: Pressing this key brings up the smart guide, a list of antenna TV channels.
• Play/Pause: Pause live TV for up to 90 minutes when a 16 GB USB drive is connected.
• RWD scan and FWD scan: Allows you to fast forward and rewind while using the Live TV pause feature.
• D-Pad left and right: Allows you to scroll through the paused Live TV and select scenes.

•L
 ive TV Pause can pause content received on the antenna TV input for up to 90 minutes and requires a 16 GB or larger USB
drive and a valid Roku account. All data on the USB drive will be deleted prior to use.

10  Download the Roku mobile app (optional)


The free Roku mobile app allows you to use your mobile device as a fully functioning remote control with voice search and
keyboard.
• Download the Roku mobile app on your smartphone or tablet through Google Play or Apple App Store.
• Simply search for “Roku app” and choose the “Roku” app provided by Roku Inc.
• Follow the on-screen prompts and you are on your way.

• Follow the on-screen prompts and you are on your way.

Caution
Funai Corporation, Inc. does not warrant access to the portal or to any of the services, content, software and advertising. Funai
Corporation, Inc. may, in its sole discretion, add or remove access to any specific services, content, software and advertising
at any time. Although Funai Corporation, Inc. will strive to provide a good selection of services, content or software, Funai
Corporation, Inc. does not warrant continued access to any specific services, and content or software.

Funai Corporation, Inc. does not warrant Wireless Screencasting compatibility with all source devices such as smartphones,
tablets, laptops, etc. due to large variability in hardware, firmware, drivers, software and implementation of wireless casting
applications on these source devices. Although Funai Corporation, Inc. will strive to enhance compatibility and performance
across a range of source devices, Funai Corporation, Inc. does not warrant compatibility with specific source devices.
11  Using the remote control
This remote control is designed to be incredibly intuitive for watching TV and navigating on-screen menus.

A
B C
D
E M
K
F G*
H J
I
L

Here are some buttons you should know about.


RWD scan: Rewind streaming video, scroll left one page
A Power: Turn TV on and off H at a time

Play / Pause: Start or pause playback. This button is also


B Back: Return to previous screen I used to pause live TV for up to 90 minutes when a 16 GB
USB drive is attached to the TV.

FWD scan: Fast forward streaming video, scroll right one


C Home: Return to Roku Home screen J page at a time

D OK: Select an option from a menu K Sleep: Set the sleep timer

Up or Down: Move up or down; Left or Right: Move left Featured channel shortcut: Lets you directly access
E or right L featured channels

Instant replay: Replay the last few seconds of streaming Volume / Mute: Increase / Decrease volume and mutes
F video M the TV sound

Options: Access to picture settings, move streaming


G channel icons and more

*The gives you easy access to picture settings, display options and more. Try it on every screen.
Safety instruction Important safety instructions
Register online at www.philips.com/welcome today 1. Read these instructions.
to get the most benefits from your purchase. 2. Keep these instructions.
3. Heed all warnings.
Registering your model with Philips makes you eligible for all of the 4. Follow all instructions.
valuable benefits listed below, so don’t miss out. 5. Do not use this apparatus near water.
Register online at www.philips.com/welcome to ensure: 6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
* Product safety notification * Additional benefits manufacturer’s instructions.
By registering your product, you’ll Registering your product guarantees 8. Do not install near any heat sources such as radiators, heat registers,
receive notification - directly from the that you’ll receive all of the privileges stoves, or other apparatus (including amplifiers) that produce heat.
manufacturer - in the rare case of a to which you’re entitled, including 9. Do not defeat the safety purpose of the polarized or grounding-type
product recall or safety defect. special money-saving offers. plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
Know these safety symbols The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for

CAUTION
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
RISK OF ELECTRIC SHOCK the apparatus.
DO NOT OPEN 11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
CAUTION: T
 O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE When a cart is used, use caution when moving the cart /
COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. apparatus combination to avoid injury from tip-over.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 13. Unplug this apparatus during lightning storms or when
The caution marking is located on the rear or bottom of the cabinet. unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
The lightning flash with arrowhead symbol, within an when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
equilateral triangle, is intended to alert the user to the have fallen into the apparatus, the apparatus has been exposed to
presence of uninsulated “dangerous voltage” within rain or moisture, does not operate normally, or has been dropped.
the apparatus’s enclosure that may be of sufficient
Note to the CATV system installer:
magnitude to constitute a risk of electric shock to persons. This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
The exclamation point within an equilateral triangle is and, in particular, specifies that the cable ground shall be connected
intended to alert the user to the presence of important to the grounding system of the building, as close to the point of cable
entry as practical.
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus. Example of antenna grounding as per NEC - National Electric Code

WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to GROUND CLAMP
ANTENNA LEAD IN WIRE
rain or moisture. Apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION: ANTENNA DISCHARGE UNIT


To prevent electric shock, match wide blade of plug to wide slot, fully insert. (NEC SECTION 810-20)

GROUNDING CONDUCTORS
For fastest support visit us online for chat and self service (NEC SECTION 810-21)
solutions at www.philips.com/support
GROUND CLAMPS
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS POWER SERVICE GROUNDING ELECTRODE
ELECTRIC SERVICE EQUIPMENT SYSTEM (NEC ART 250, PART H)
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer electronics industry
are committed to making home entertainment safe and enjoyable. Wall mount bracket kit
• As you enjoy your television, please note that all televisions – new and
old- must be supported on proper stands or installed according to the Brand Model # Screw dimension
manufacturer’s recommendations. Televisions that are inappropriately 32PFL4764/F7 A
situated on dressers, bookcases, shelves, desks, speakers, chests, carts,
etc., may fall over, resulting in injury. 32PFL4664/F7 A SANUS AST16 M4 x 1.378 ” (35 mm)
24PFL4664/F7
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the safe
installation of your television. •Y  our TV meets the VESA standard for wall mounting. Consult with your
• ALWAYS read and follow all instructions for proper use of your television. local dealer for a wall mount bracket which is compatible with your
• NEVER allow children to climb on or play on the television or the TV model.
furniture on which the television is placed. • The recommended wall mount bracket kit (sold separately) allows the
• NEVER place the television on furniture that can easily be used as steps, mounting of the TV on the wall.
such as a chest of drawers. • For detailed information on installing the wall mount, refer to the wall
• ALWAYS install the television where it cannot be pushed, pulled over or mount instruction book.
knocked down. • Funai Corporation is not responsible for any damage to the product
• ALWAYS route cords and cables connected to the television so that they or injury to yourself or others if you elect to install the TV wall mount
cannot be tripped over, pulled or grabbed. bracket or mount the TV onto the bracket on your own.
• The wall mount bracket must be installed by experts.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional installation if you have Funai Corporation is not liable for any accidents or injuries incurred while
any doubts about your ability to safely mount your television. installing this product, including but not limited to those noted below:
• ALWAYS use a mount that has been recommended by the television • Install the wall mount bracket on a sturdy vertical wall.
manufacturer and has a safety certification by an independent • If installed onto a ceiling or slanted wall, the TV and wall mount bracket
laboratory (such as UL, CSA, ETL). may fall which could result in a severe injury.
• ALWAYS follow all instructions supplied by the television and mount • Do not use screws that are longer or shorter than their specified length.
manufacturers. If screws too long are used this may cause mechanical or electrical
• ALWAYS make sure that the wall or ceiling where you are mounting the damage inside the TV set. If screws too short are used this may cause
television is appropriate. Some mounts are not designed to be mounted the TV set to fall.
to walls and ceilings with steel studs or cinder block construction. If you • Do not fasten the screws by excessive force. This may damage the
are unsure, contact a professional installer. product or cause the product to fall, leading to an injury.
• Televisions can be heavy. A minimum of two people is required for a • For safety reasons use 2 people to mount the TV onto a wall mounting
wall or ceiling mount installation. bracket.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME • Do not mount the TV onto the wall mounting bracket while your TV is
• Many new television buyers move their older CRT televisions into a plugged in or turned on. It may result in an electrical shock injury.
secondary room after the purchase of a flat-panel television. Special When installing the unit on the wall, allow this much space.
care should be made in the placement of older CRT televisions. Top : 11.8 ” (30 cm)
• ALWAYS place your older CRT television on furniture that is sturdy and
appropriate for its size and weight. Left and right side : 5.9 ” (15 cm)
• NEVER place your older CRT television on a dresser where children may Bottom : 3.9 ” (10 cm)
be tempted to use the drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the
edge of your furniture.
Notice Positioning the TV
• Large screen TVs are heavy. 2 people are required to
carry and handle a large screen TV.
Trademarks are the property of Koninklijke Philips N.V. or their respective • Make sure to hold the upper and bottom frames of the
owners. Funai Corporation reserves the right to change products at any unit firmly as illustrated.
time without being obliged to adjust earlier supplies accordingly. • Install the unit in a horizontal and stable position.
The material in document is believed adequate for the intended use of • Do not install the unit in direct sunlight or in a place
the system. If the product or its individual modules or procedures are subject to dust or strong vibration.
used for purposes other than those specified herein, confirmation of their • Depending on the environment, the temperature of this unit may
validity and suitability must be obtained. increase slightly. This is not a malfunction.
Funai Corporation warrants that the material itself does not infringe any • When installing this unit in a temperate environment, avoid a place with
United States patents. rapid temperature changes.
No further warranty is expressed or implied. • This unit should not be used in a tropical environment as it has not been
Funai Corporation cannot be held responsible neither for any errors in evaluated under such conditions.
the content of document nor for any problems as a result of the content • No objects should be placed directly on or under this unit, especially
in document. Errors reported to Funai Corporation will be adapted and lighted candles or other flaming objects.
published on the Funai Corporation support website as soon as possible. • Depending on your external devices, noise or disturbance of the picture
Pixel characteristics and / or sound may be generated if the unit is placed too close to them.
This LCD product has a high number of color pixels. Although it has In this case, please ensure enough space between the external devices
effective pixels of 99.999 % or more, black dots or bright points of light and the unit.
(red, green or blue) may appear constantly on the screen. This is a • Do not insert the AC power cord into the power socket outlet before all
structural property of the display (within common industry standards) and the connections are made.
is not a malfunction. • Ensure that you always have easy access to the AC power cord and
outlet to disconnect the TV from the AC outlet.
Warranty • Before you move the TV, disconnect attached cables to prevent damage
No components are user serviceable. Do not open or remove covers to to connectors, especially the TV tuner.
the inside of the product. Repairs may only be done by service centers • Be sure to unplug the AC power plug from the AC outlet before moving
and official repair shops. Failure to do so shall void any warranty, stated or carrying the unit.
or implied. • When moving the TV and then setting it down, please be careful not to
Any operation expressly prohibited in document, any adjustments or pinch the AC power cord under the unit.
assembly procedures not recommended or authorized in document shall
void the warranty. Regulatory notices
WARNING: To prevent injury, this apparatus must be securely attached to
Federal communications commission notice the furniture / wall in accordance with the instructions.
This equipment has been tested and found to comply with the limits for a Tipping, shaking or rocking the unit may cause injury / death.
Class B digital device, pursuant to part 15 of the FCC Rules. WARNING: Never place a TV in an unstable location. A TV may fall,
These limits are designed to provide reasonable protection against causing serious personal injury or death. Many injuries,
harmful interference in a residential installation. This equipment particularly to children, can be avoided by taking simple
generates, uses and can radiate radio frequency energy and, if not precautions such as:
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no – Using cabinets or stands recommended by the manufacturer
guarantee that interference will not occur in a particular installation. of the TV.
If this equipment does cause harmful interference to radio or television – Only using furniture that can safely support the TV.
reception, which can be determined by turning the equipment off and on, – Ensuring the TV is not overhanging the edge of the
the user is encouraged to try to correct the interference by one or more of supporting furniture.
the following measures: – Not placing the TV on tall furniture (for example, cupboards
• Reorient or relocate the receiving antenna. or bookcases) without anchoring both the furniture and the
• Increase the separation between the equipment and the receiver. TV to a suitable support.
• Connect the equipment into an outlet on a circuit different from that to – Not placing the TV on cloth or other materials that may be
which the receiver is connected. located between the TV and supporting furniture.
• Consult the dealer or an experienced radio or television technician for – Educating the children about the dangers of climbing on
help. furniture to reach the TV or its controls.
This device complies with part 15 of the FCC rules. Operation is subject If your existing TV is being retained and relocated, the same
to the following two conditions: (1)This device may not cause harmful considerations as above should be applied.
interference, and (2)This device must accept interference received,
including interference that may cause undesired operation. Do not place the unit on the furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing or climbing on it. A falling unit
Declaration of conformity can cause serious injury or even death. In order to avoid interruption of
Trade name: PHILIPS ventilation, this unit should not be placed in built-in equipment such as a
Responsible party: Funai Corporation, Inc. book cabinet, rack, etc., and the vents of this unit should not be covered
Model: 32PFL4764/F7 A, 32PFL4664/F7 A, 24PFL4664/F7 with anything such as a tablecloth, curtain, newspaper, etc. Make sure
Address: 12489 Lakeland Road, Santa Fe Springs, CA 90670, USA that there is enough ventilation space (4 inches / 10 cm or more) around
Telephone number : 1 866 309 5962 this unit.
Modifications Press B to turn the unit on and go into standby mode. To completely turn
This apparatus may generate or use radio frequency energy. Changes or off the unit, you must unplug the AC power plug from the AC power outlet.
modifications to this apparatus may cause harmful interference. Disconnect the AC power plug to shut the unit off when trouble is found or
Any modifications to the apparatus must be approved by Funai
Corporation.
En
not in use. The AC plug shall remain readily available.

The user could lose the authority to operate this apparatus if an


unauthorized change or modification is made.
Cables
Connections to this device must be made with shielded cables with
AC power plug
metallic RFI / EMI connector hoods to maintain compliance with FCC rules
and regulations.
FCC statutory notice for wireless LAN adapter.
FCC caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
Never use a gas duster on this TV.
this equipment.
The gas trapped inside of this unit may cause ignition and explosion.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
FCC RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment should be installed and operated keeping the
radiator at least 20 cm or more away from your body.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed
down through the MAC, through the digital and analog baseband, and
finally to the RF chip. Several special packets are initiated by the MAC.
These are the only ways the digital baseband portion will turn on the RF
transmitter, which it then turns off at the end of the packet. Therefore,
the transmitter will be on only while one of the aforementioned
packets is being transmitted. In other words, this device automatically
discontinue transmission in case of either absence of information to
transmit or operational failure.
Environmental care
Limited warranty
LIMITED WARRANTY ONE (1) YEAR
WARRANTY COVERAGE:
The packaging of this product is intended to be recycled. This warranty obligation is limited to the terms as set forth below.
Contact your local authorities for information about how to recycle the
packaging. WHO IS COVERED:
For product recycling information, please visit - www.recycle.philips.com This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials and
End of life directives workmanship as based on the date of original purchase (“Warranty
Philips pays a lot of attention to produce environmental-friendly products Period”) from an Authorized Dealer. The original sales receipt showing
in green focal areas. Your new TV contains materials which can be the product name and the purchase date from an authorized retailer is
recycled and reused. At the end of its life, specialized companies can considered such proof.
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you WHAT IS COVERED:
dispose of your old TV according to local regulations. This warranty covers new products if a defect in material or workmanship
occurs and a valid claim is received within the Warranty Period. At its
# Batteries usage option, the company will either (1) repair the product at no charge, using
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace new or refurbished replacement parts, or (2) exchange the product with
only with the same or equivalent type. a product that is new or which has been manufactured from new, or
WARNING: Batteries (battery pack or battery installed) should not be serviceable used parts and is at least functionally equivalent or most
exposed to excessive heat such as sunshine, fire or the like. comparable to the original product in current inventory, or (3) refund the
• Do not mix old and new batteries. original purchase price of the product.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, Replacement products or parts provided under this warranty are covered
ni-mh, Li-ion, etc.) batteries. against defects in materials and workmanship from the date of the
Disposal of used batteries replacement or repair for ninety (90) days or for the remaining portion of
the original product’s warranty, whichever provides longer coverage for
The batteries supplied do not contain the heavy metals mercury and you. When a product or part is exchanged, any replacement item becomes
cadmium, however in certain localities, disposing batteries with household your property and the replaced item becomes company property. When a
waste is not permitted. Please ensure you dispose of batteries according refund is given, your product becomes company property.
to local regulations.
Note: Any product sold and identified as refurbished or renewed carries a
Downloading an electronic copy ninety (90) day Limited warranty.
To obtain a more detailed electronic copy of document:
Replacement product can only be sent if all warranty requirements are
1. Point your browser to : www.philips.com/support met. Failure to follow all requirements can result in delay.
2. Choose your country of location with language.
3. Enter the product name or number in the search field.Alternatively, you WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
can browse the catalog. This Limited warranty applies only to new company manufactured
4. Click the description or model. products that can be identified by the trademark, trade name, or logo
5. Under product support, click “User manual”. affixed to it. This Limited warranty does not apply to any hardware
Preparing to move / ship the unit product or any software, even if packaged or sold with the product, as
manufacturers, suppliers, or publishers may provide a separate warranty
Please pack the unit properly by following the diagram for their own products packaged with the bundled product.
on the carton (as noted below).
The company is not liable for any damage to or loss of any programs,
• To avoid damage to the screen, do not pack the data, or other information stored on any media contained within the
stand on the same side as the TV screen, refer to the product, or other additional product or part not covered by this warranty.
illustration. Recovery or reinstallation of programs, data or other information is not
covered under this Limited warranty.
This warranty does not apply (a) to damage caused by accident, abuse,
misuse, neglect, misapplication, or non-supplied product, (b) to damage
caused by service performed by anyone other than company approved
Authorized Service Location, (c) to a product or a part that has been
modified without written company permission, or (d) if any serial number
has been removed or defaced, or (e) product, accessories or consumables
Copyright sold “AS IS” without warranty of any kind by including refurbished product
All other registered and unregistered trademarks are the property of their sold “AS IS” by some retailers.
respective owners. This Limited warranty does not cover:
• Shipping charges to return defective product.
The terms HDMI and HDMI High-Definition • Labor charges for installation or setup of the product, adjustment of
Multimedia Interface, and the HDMI Logo are customer controls on the product, and installation or repair of antenna /
trademarks or registered trademarks of HDMI signal source systems outside of the product.
Licensing Administrator, Inc. in the United States • Product repair and / or part replacement because of improper installation
and other countries. or maintenance, connections to improper voltage supply, power line surge,
lightning damage, retained images or screen markings resulting from
Manufactured under license from Dolby viewing fixed stationary content for extended periods, product cosmetic
Laboratories. Dolby, Dolby Audio, and the appearance items due to normal wear and tear, unauthorized repair or
double-D symbol are trademarks of Dolby other cause not within the control of the company.
Laboratories Licensing Corporation. • Damage or claims for products not being available for use, or for lost
data or lost software.
• Damage from mishandled shipments or transit accidents when returning
Portions of this software are copyright © The FreeType Project (www. product.
freetype.org). • A product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was designed,
The American Academy of Pediatrics discourages television viewing for manufactured, approved and / or authorized, or repair of products
children younger than two years of age. damaged by these modifications.
Some features may require an always-on broadband internet • A product used for commercial or institutional purposes (including but
connection, firmware update and / or a minimum bandwidth. Internet not limited to rental purposes).
services vary by location. • Product lost in shipment and no signature verification receipt can be
provided.
Funai Corporation, Inc. does not warrant access to the portal or to any • Failure to operate per document.
of the services, content, software and advertising. Funai Corporation,
Inc. may, in its sole discretion, add or remove access to any specific TO OBTAIN ASSISTANCE…
services, content, software and advertising at any time. Although Funai Contact the customer care center at: 1 866 309 5962
Corporation, Inc. will strive to provide a good selection of services, Chat with us in English: https://tinyurl.com/y2e29xsq
content or software, Funai Corporation, Inc. does not warrant continued REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
access to any specific services, and content or software. THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING
Funai Corporation, Inc. does not warrant Wireless Screencasting COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
compatibility with all source devices such as smartphones, tablets, DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
laptops, etc. due to large variability in hardware, firmware, drivers, THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
software and implementation of wireless casting applications on these LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
source devices. Although Funai Corporation, Inc. will strive to enhance FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN
compatibility and performance across a range of source devices, Funai DURATION TO THE DURATION OF THIS WARRANTY.
Corporation, Inc. does not warrant compatibility with specific source Some states do not allow the exclusions or limitation of incidental or
devices. consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights. You may have other rights
which vary from state / province to state / province.
Funai Service Corporation
2425 Spiegel Drive, Groveport, OH 43125, USA
For further assistance, call customer support in your country;
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands 1 866 309 5962
We also offer chat for products sold in the U.S. and Canada at https://tinyurl.com/yd277459
Enter below the model and serial numbers located on the left side and the rear of the TV cabinet.

Model:
Serial:

(To find your Philips Roku TV model number, go to Home > Settings > System > About)

For complete instructions, please visit www.philips.com/support to download the full version of the User manual.
This product has been manufactured by and is sold under the responsibility of Funai Corporation, Inc., and Funai Corporation,
Inc. is the warrantor in relation to this product.
The Philips trademark and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V. used under license.
ROKU, ROKU TV and the ROKU logo are the trademarks or registered trademarks of Roku, Inc. All other trademarks and logos
herein are the property of their respective owners.

You might also like