Data sheet 3RP1505-1BP30

Timing relay, Multifunction Phased-out product !!! For further information, please
contact our sales department 2 change-over contacts, 16 functions 15 time ranges
(0.05 s-100 h) 24 V 200-240 V AC and 24 V DC at 50/60 Hz AC with LED, Screw
terminal

product brand name SIRIUS

product designation timing relay
product type designation 3RP15
General technical data
product component
● relay output Yes
● semi-conductor output No
product extension required remote control No
product extension optional remote control No
power loss [W] maximum 2W
insulation voltage for overvoltage category III according to IEC 300 V
60664 with degree of pollution 3 rated value
test voltage for isolation test 2 kV
degree of pollution 3
surge voltage resistance rated value 4 000 V
protection class IP IP20
shock resistance according to IEC 60068-2-27 11g / 15 ms
vibration resistance according to IEC 60068-2-6 10 ... 55 Hz / 0.35 mm
mechanical service life (operating cycles) typical 10 000 000
electrical endurance (operating cycles) at AC-15 at 230 V 100 000
typical
adjustable time 0.05 ... 100 s
relative setting accuracy relating to full-scale value 5%
thermal current 5A
minimum ON period 35 ms
recovery time 150 ms
reference code according to IEC 81346-2 K
relative repeat accuracy 1%
influence of the surrounding temperature ±5 %
power supply influence ±1 %
Substance Prohibitance (Date) 05/28/2009
Control circuit/ Control
type of voltage of the control supply voltage AC/DC
control supply voltage 1 at AC
● at 50 Hz rated value 24 V
● at 60 Hz rated value 24 V
control supply voltage 2 at AC
● at 50 Hz 200 ... 240 V
● at 60 Hz 200 ... 240 V
control supply voltage frequency 1 50 ... 60 Hz
control supply voltage 1

3RP15051BP30 Subject to change without notice

5/9/2023
Page 1/5 © Copyright Siemens
 ● at DC rated value 24 V
operating range factor control supply voltage rated value at
DC
● initial value 0.85
● full-scale value 1.1
operating range factor control supply voltage rated value at
AC at 50 Hz
● initial value 0.85
● full-scale value 1.1
operating range factor control supply voltage rated value at
AC at 60 Hz
● initial value 0.85
● full-scale value 1.1
Switching Function
switching function
● ON-delay Yes
● ON-delay/instantaneous contact Yes
● passing make contact Yes
● passing make contact/instantaneous contact Yes
● OFF delay No
switching function
● flashing symmetrically with interval start/instantaneous Yes
● flashing symmetrically with interval start Yes
● flashing symmetrically with pulse start/instantaneous No
● flashing symmetrically with pulse start No
● flashing asymmetrically with interval start No
● flashing asymmetrically with pulse start No
switching function
● star-delta circuit with delay time No
● star-delta circuit Yes
switching function with control signal
● additive ON-delay Yes
● passing break contact Yes
● passing break contact/instantaneous Yes
● OFF delay Yes
● OFF delay/instantaneous Yes
● pulse delayed No
● pulse delayed/instantaneous No
● pulse-shaping Yes
● pulse-shaping/instantaneous Yes
● additive ON-delay/instantaneous Yes
● ON-delay/OFF-delay/instantaneous Yes
● passing make contact No
● passing make contact/instantaneous contact No
switching function of interval relay with control signal
● retrotriggerable with deactivated control No
signal/instantaneous contact
● retrotriggerable with switched-on control signal No
● retrotriggerable with switched-on control No
signal/instantaneous contact
● retriggerable with deactivated control signal No
design of the control terminal non-floating Yes
Short-circuit protection
design of the fuse link for short-circuit protection of the auxiliary fuse gL/gG: 4 A
switch required
Auxiliary circuit
material of switching contacts AgSnO2
number of NC contacts
● delayed switching 0
● instantaneous contact 0
number of NO contacts
● delayed switching 0

3RP15051BP30 Subject to change without notice

5/9/2023
Page 2/5 © Copyright Siemens
 ● instantaneous contact 0
number of CO contacts
● delayed switching 2
● instantaneous contact 0
operational current of auxiliary contacts at AC-15
● at 24 V 3A
● at 250 V 3A
operational current of auxiliary contacts at DC-13
● at 24 V 1A
● at 125 V 0.2 A
● at 250 V 0.1 A
operating frequency with 3RT2 contactor maximum 5 000 1/h
contact reliability of auxiliary contacts one incorrect switching operation of 100 million switching operations (17 V, 5
mA)
contact rating of auxiliary contacts according to UL R300 / B300
Inputs/ Outputs
product function
● non-volatile No
Electromagnetic compatibility
EMC emitted interference according to IEC 61812-1 EN 61000-6-4(3)
EMC immunity according to IEC 61812-1 EN 61000-6-2
conducted interference
● due to burst according to IEC 61000-4-4 2 kV network connection / 1 kV control connection
● due to conductor-earth surge according to IEC 61000-4-5 2 kV
● due to conductor-conductor surge according to IEC 1 kV
61000-4-5
field-based interference according to IEC 61000-4-3 10 V/m
electrostatic discharge according to IEC 61000-4-2 4 kV contact discharge / 8 kV air discharge
Safety related data
protection class IP on the front according to IEC 60529 IP20
type of insulation Basic insulation
category according to EN 954-1 none
Connections/ Terminals
product component removable terminal for auxiliary and Yes
control circuit
type of electrical connection for auxiliary and control circuit screw-type terminals
type of connectable conductor cross-sections
● solid 1x (0.5 ... 4.0 mm²), 2x (0.5 ... 2.5 mm²)
● finely stranded with core end processing 1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.5 mm²)
● at AWG cables solid 2x (20 ... 14)
● at AWG cables stranded 2x (20 ... 14)
connectable conductor cross-section
● solid 0.5 ... 4 mm²
● finely stranded with core end processing 0.5 ... 2.5 mm²
AWG number as coded connectable conductor cross
section
● solid 20 ... 14
● stranded 20 ... 14
tightening torque 0.8 ... 1.2 N·m
design of the thread of the connection screw M3
Installation/ mounting/ dimensions
mounting position any
fastening method screw and snap-on mounting onto 35 mm DIN rail
height 102 mm
width 22.5 mm
depth 91 mm
required spacing
● with side-by-side mounting
— forwards 0 mm
— backwards 0 mm
— upwards 0 mm
— downwards 0 mm

3RP15051BP30 Subject to change without notice

5/9/2023
Page 3/5 © Copyright Siemens
 — at the side 0 mm
● for grounded parts
— forwards 0 mm
— backwards 0 mm
— upwards 0 mm
— at the side 0 mm
— downwards 0 mm
● for live parts
— forwards 0 mm
— backwards 0 mm
— upwards 0 mm
— downwards 0 mm
— at the side 0 mm
Ambient conditions
installation altitude at height above sea level maximum 2 000 m
ambient temperature
● during operation -25 ... +60 °C
● during storage -40 ... +85 °C
● during transport -40 ... +85 °C
relative humidity during operation 10 ... 95 %
Certificates/ approvals
General Product Approval EMC

Confirmation

Declaration of Conformity Test Certificates Marine / Shipping

Type Test Certific-

ates/Test Report

Marine / Shipping other Railway

Confirmation Miscellaneous Special Test Certific-

ate

Further information
Siemens has decided to exit the Russian market (see here).
https://press.siemens.com/global/en/pressrelease/siemens-wind-down-russian-business
Siemens is working on the renewal of the current EAC certificates.
Please contact your local Siemens office on the status of validity of the EAC certification if you intend to import or offer to supply these products to an
EAC relevant market (other than the sanctioned EAEU member states Russia or Belarus).
Information on the packaging
https://support.industry.siemens.com/cs/ww/en/view/109813875
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RP1505-1BP30
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RP1505-1BP30
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RP1505-1BP30
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RP1505-1BP30&lang=en
Characteristic: Derating
https://support.industry.siemens.com/cs/ww/en/ps/3RP1505-1BP30/manual

3RP15051BP30 Subject to change without notice

5/9/2023
Page 4/5 © Copyright Siemens
 86
65
23 5 36
4 7

92
110x15

102
74
120

83
68
87

last modified: 11/21/2022

3RP15051BP30 Subject to change without notice

5/9/2023
Page 5/5 © Copyright Siemens