Scribd
Upload
139 views1 page

Generator Controls Panal

Uploaded by

And jaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
139 views1 page

Generator Controls Panal

Uploaded by

And jaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Home Products Parts & Services Rentals Resources Locations Contact Current Inventory

GENERATOR CONTROLS
Home / Generator Controls

TAYLOR POWER®
Generators Controls

Anyone who depends on a generator for emergency power understands


that the generator is only as good as its control unit. The control unit must
be dependable when switching from utility to standby power. At Taylor
Power Systems, we understand this and have designed control units with
the user in mind. Our Microprocessor-based Control systems provide a
versatile system for gen-set control, protection, and monitoring. The
panel's back-lit LCD display provides readout of all critical information with
digital accuracy - assuring complete engine protection. The
A RELIABLE GENERATOR CONTROL IS ESSENTIAL. microprocessor design allows customization of the controller's functions
to fit virtually every application's needs.

CONTACT US FOR MORE INFORMATION ON OUR CONTROLS

Taylor Power Locations

DIGITAL CONTROL PANEL


DGC-2020
The DGC-2020 is a microprocessor based generator set controller that incorporates advanced
technology and features into a user friendly rugged design. The DGC-2020 provides integrated
engine-genset control, protection, and metering. Front panel controls and indicators enable quick
and simple operation.This device is encapsulated and is the most rugged genset controller found
anywhere. It can sense engine parameters directly via analog senders, or it can communicate with
engines ECU using SAE J1939 CANBUS communications.

Important Features
Generator Metering
Engine Metering
Genset Control
Engine Protection
Generator Protection (27,59,81O,81U)
SAE J1939 Engine ECU Communications
Remote communications to (optional) RDP-110 Remote Annunciator
Extremely rugged, fully encapsulated design
16 programmable contact inputs
2 Contact outputs: (1) 30 Adc Generator Run (1) programmable 2 Adc rated contact
Wide Ambient Temperature range
Modbus Communications with RS-485
Battery Backup for Real Time Clock
LCD Heater
UL recognized
HALT tested
IP54 front panel rating
NFPA 110 compatible

OPTIONAL CONTROL PANEL


The RDP-110 is used in conjunction with the DGC family of Digital Genset Controllers to provide
remote annunciation of the emergency standby generator system. This panel complies with the
requirements of NFPA 110. The DGC detects an alarm or pre-alarm condition and communicates via
RS-485 to the RDP-110. The RDP-110 is available in two mounting configurations, surface and semi-
flush mount.

TAYLOR POWER DGC-2020 TECH DATA

TAYLOR POWER RDP-110 REMOTE DISPLAY PANEL TECH DATA

ANALOG CONTROL PANEL


Our analog control panels are built for dependability and ruggedness, with large analog gauges that
enable the user to monitor load and other functions at a glance. Our analog control panel will
automatically start and monitor engine conditions in order to protect your investment.

The three large analog gauges, at the top of the unit, display the generator output in voltage,
the speed of the generator set in Hertz, and the percentage of load on the generator.
The Control Toggle Switch enables the user to switch the generator from off to the manual or
auto position.
The Running Time Meter displays the number of hours the generator set has run.
The ECU provides complete automation and safety monitoring of the engine. It controls the
starter and fuel. A built in speed switch controls both starter disengagement and overspeed
protection. The ECU automatically cranks, runs, and monitors the engine for overcrank,
overspeed, high water temperature and low oil pressure.

Terms of Use | Privacy Policy

Copyright © Taylor Power Systems, Inc 2023


YOUR COMPLETE GENERATORS SOLUTION

"Taylor Power Systems, Inc." is a proud member of The Taylor Group of Companies
All trademarks and registered trademarks are the property of their respective owners.

You might also like