Atlas Copco Underground Loaders

Scooptram® ST2D
Technical specification
W

ST-2D
Scooptram

The Scooptram ST2D is a reliable 3600 kg tramming capacity

Scooptram for smaller sized operations that range from narrow
vein mines to construction sites. This vehicle has built its repu-
tation bucket by bucket throughout the world .

Features
Load frame:
• A parallel boom design matched to an aggressive bucket • High ground clearance protects the machine from dam-
configuration provide for efficient mucking operations age
• Three point mounting and anti-skip protection provides
Operator’s Compartment: safe access for operators and service personnel
• Side seated operator position for efficient bi-directional
operation with maximum visibility General:
• Ergonomic operator seat with seat belt for comfort during • Long life roller bearing centre articulation joint
a full operating shift • Central manual lubrication

Power frame:
• Conventional and proven components are well protected
within the frame
 Scooptram® ST2D

Specifications
Capacities Motion times
SAE regulations Boom
Tramming capacity 3600 kg Raising 3.7 seconds
Breakout force, hydraulic 9060 kg Lowering 3.0 seconds
Breakout force 5936 kg Bucket
Dumping 6.4 seconds

Engine (standard) Electrical system

• Deutz Diesel ............................................................. F6L-912W • System Voltage ..................24 Volt starting, 24 Volt accessories
• MSHA Rating at 2,300 rpm.............................................. 63 kW
• Maximum torque at 1,500 rpm.......................................292 Nm
Tires
• Number of Cylinders......................................................6 in line • Nylon, smooth tread design for underground mine service, on
• Dislacement.........................................................................5.6 L demountable rims
• Cooling...................................................................................Air • Tire size, front and rear........12.00x24, 16 ply STMS L-5S , TT
• MSHA Part 7 ventilation
Vent Rate........................................................ 127 m3/min * As applications and conditions vary, Atlas Copco recommends
Particulate index............................................. 142 m3/min that the user consults with tire suppliers to obtain the optimum
tire selection.
Axles
Spicer 14D: Spiral bevel differential, full floating, planetary Operator’s compartment
wheel end drive • Side seated operator for bi-directional operation and maximum
• Differentials: visibility
Front.....................................................................no spin • Canopy: MSHA approved
Rear.....................................................................standard • Monostick steering control
• Degree of rear axle oscillation.......... Total 16° (8° on each side) • Dual lever dump and hoist control

Brakes Hydraulic system

• Service................................................................................. LCB
• Heavy duty gear type pumps
Hydraulically applied spring released: , fully enclosed wet discs
• Cylinders.............................Double acting, chrome plated stems
at each wheel end
• Cylinder diameter
• Parking and emergency: Spring applied, hydraulically released,
Steer cylinder (1), diameter.......................................127 mm
multiple wet discs, built into transmission
Hoist cylinder (1), diameter......................................178 mm
System Dump cylinder (1), diameter.....................................178 mm
• Pumps
• Fire extinguisher, 6 kg Dump /hoist............................. 91 + 91 L/min (at 2,300 rpm)
• Central manual lubrication Steering.......................................... 91 L/min (at 2,300 rpm)
• Filtration................................................ Suction line: 25 micron
Torque converter • Dump /hoist system pressure........................................11.4 MPa
Single stage
• Spicer...................................................................... C-270 Series
Tank capacities
• Fuel ..............................................................................148 litres
Transmission • Hydraulic .....................................................................144 litres
Modulated power shift, 4 speeds forward and reverse
• Spicer................................................................... R32000 Series Steering
Articulated hydraulic power steering, pilot operated
Exhaust system monostick control
• Turning angle............................................. 81° (40.5° each way)
Catalytic purifier plus exhaust silencer
• System pressure......................................... 13.1 Mpa (1,900 psi)
 Scooptram® ST2D

Left turning radius Drift size

2880

3090

R2668

R4766 2370
Rear view

• Turning angle +/-40.5°

1638
• Dimensions shown are based on standard vehicle con-
2880
figuration with 27 mm tire deflection.
• All dimensions are shown in millimeters.

Grade performance
Percent grade 0.0 2.0 4.0 6.0 8.3 10.0 12.5 14.3 16.0 18.0 20.0 25.0 30.0
Ratio 1:12 1:10 1:8 1:7 1:5 1:4

1st gear (km/h) 3.4 3.3 3.2 3.2 3.1 3.1 3.1 3.0 3.1 2.9 2.9 2.8 2.8

2nd gear (km/h) 6.9 6.6 6.5 6.3 6.1 6.0 5.8 5.7 5.6 5.2 4.9 4.0 3.2

3rd gear (km/h) 11.4 10.9 10.5 10.1 9.5 8.6 7.2 6.3

4th gear (km/h) 19.5 18.2 15.8

Standard configuration, bucket empty

Percent grade 0.0 2.0 4.0 6.0 8.3 10.0 12.5 14.3 16.0 18.0 20.0 25.0 30.0
Ratio 1:12 1:10 1:8 1:7 1:5 1:4

1st gear (km/h) 3.3 3.2 3.2 3.1 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.7 2.5

2nd gear (km/h) 6.7 6.5 6.3 6.1 5.9 5.8 5.3 4.9 4.5 4.0 3.6 2.7 2.0

3rd gear (km/h) 11.2 10.6 10.1 9.2 7.6 6.4 5.1 4.2 3.5 2.6 1.7

4th gear (km/h) 18.9 16.6 12.0 8.4 5.2 2.6

Standard configuration, bucket loaded

Optional equipment
Main frame options • 12.00R24 Michelin X Mine Control and instruments • Parts manual - Plasticised
• Boom Up Lock device D2+ options • Service manual - Plasti-
• Wheel Chocks and Chock • 12.00x24 Bridgestone MLS • Block out 3rd and/or 4th gears cised
Brackets • Low hydraulic level warning
• Dump cylinder rod protector System options • Single Lever Dump and Hoist Hydraulic system options
• Knockdown - Specify weight • Ansual Single bottle fire Control • EOD hydraulics & controls
and dimension limitations suppression w/Engine kill only
• Shipping covers • Lincoln auto lube w/Timer Power unit options
• EOD bucket • Manual hydraulic tank fill • Engine shutdown system Drive train options
pump • Oil bath air cleaner • Posi-Stop Brakes
Ergonomic option • Exhaust purifier and fume
• Wheel Steering Control Electrical system options diluter Miscellaneous options
• Audio - visual Reverse • Tool box
Tires Alarm Documentation options
• 12.00R24 Michelin X Mine • Gauge Lights • LinkOne parts book CD
D2 • LinkOne viewer
 3733

2544

Side view
1443
1467
W

L1
890
40°
*Standard equipped vehicle with empty bucket

• All dimensions are shown in millimeters.

Dimensions and weights

1270
• Approximate net weight..................................11 540 kg*

6645
267

1270
1921
ST-2D

• Dimensions shown are based on standard vehicle configuration with 27 mm tire deflection.
Scooptram

20°
610
1548
2052
2086
Scooptram® ST2D

9851 2251 01 © Copyright 2006, Atlas Copco Rock Drills AB, Örebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.
12/2006 llustrations and photos in this brochure may show equipment with optional extras. Specifications and equipment subjects to change without notice. Consult your Atlas Copco Customer Center for specific information.