Homac RAB 350 Series Aluminum Flood-Seal Multi-Port Connectors

—
PRODUCT BROCHURE
Homac® RAB 350 series aluminum

Flood-Seal® multi-port connectors
2 H O M A C ® R A B 3 5 0 S E R I E S A L U M I N U M F L O O D - S E A L® M U LT I - P O R T C O N N E C T O R S
—
Install reliable, submersible and resealable
URD connections with ease.
It’s easier to do the job right when you have the right tools for the job. With the
proven performance of Homac RAB 350 series connectors, you’ve got just that.
These innovative connectors were designed with the installer in mind. They offer ease of use
to aid in making hassle-free, long-lasting and reliable multi-service connections in secondary
underground distribution systems.
Tethered pull-tab caps

on screw ports provide torque ratings molded right
into the tether for clear visibility throughout installation.
Cable towers
feature molded-in strip length
indicators and service port
numbers on the exterior for
easy visibility.
Inward-sealing rockets Wide-spaced cable ports Tethered sealing caps

are clearly marked with (13⁄16" on center) help speed on cable towers remove
both AWG and metric installation of #12 AWG to and reinstall by hand — no
size cable cut rings. They 350 kcmil cables, even with pliers required — and won’t
funnel stripped cable lineman’s gloves. get lost during installation.
easily into the connector They can also be resealed if
for quick installation. a cable is removed.
ARTICLE OR CHAPTER TITLE 3
The ease of use and reliability of the innovative resealable RAB 350
series connectors facilitate proper installation.
Ease of use
• Pull tab caps and tethers allow for easy hand Reliability
removal and reinstallation of the tether plug • Easy-to-find torque ratings: Molded-in torque
vs. having to be removed with pliers rating indicators on every tether, instead of
• Attached tether prevents loss of plug on the back of the connector, ensure quick
during installation determination of proper torque rating for
• Sealing caps have tether/dust cover each port
• Easy-to-find strip length indicator: Molded-in • Through-hole cable port design extends cable
strip length indicators on every cable tower, through the bar, not dead-ended, to help ensure
instead of on the back of the connector, ensure full screw contact even if the cable end is not
quick determination of proper strip length for cut square
every cable
• Inward-seal rockets enable easy cable insertion, Innovation
while the attached plugs allow conductor ports • Sealing caps have robust tether plug/dust cover
to be resealed • All caps are tethered and resealable
• Tethered screw plugs assist quick removal
and insertion, while preventing loss Continuous operation
• Installation instructions are molded right • Re-enterable and re-sealable
on the connector • No new rocket required to reseal if the cable to be
• Cut rings are clearly marked on the rocket reinstalled is the same size as the original or larger
in both AWG and metric cable sizes
• Cut rings are 3⁄8" long to allow for a wide margin Safety
of error when cutting • Environmentally sealed and suitable for use in
• Wide 13⁄16" cable port spacing facilitates easier below-grade boxes, above-ground pedestals,
installation, even with lineman’s gloves direct burial and street light applications
• Each tower is clearly numbered to allow
for tracking of installed services
RAB 4 C RAB 8 C
—
Homac RAB 350 series aluminum Flood-Seal multi-port connectors are designed
with the installer in mind, offering hassle-free, long-lasting and reliable multi-service
connections in secondary underground distribution systems.
Applications
Homac RAB 350 series connectors are typically used in 600
volt underground residential distribution (URD) systems,
specifically to distribute power from a transformer to multiple
residential, commercial or industrial services. The connectors
may be used in a radial feed or daisy-chained to extend service
distance and are designed to withstand harsh, wet, below-
grade conditions.
• URD direct burial
• URD below-grade boxes
• URD above-grade pedestals
• Street light taps
—
Specifications
Material High-strength, high-conductivity —

6061-T6 aluminum alloy bar with tin- Homac RAB 350 series aluminum Flood-Seal multi-port
plated screws and high-performance connectors with oxide inhibitor — for use with #12 AWG
TPE compound insulation solid to 350 kcmil aluminum or copper conductors
Testing 100% hi-pot tested 4000 V for Length

60 seconds to ensure safety
Cat. no. Outlets in. mm UPC no.
and performance
RAB 2 C 2 2.44 62 783786-74506
Voltage rating 600 V
RAB 3 C 3 3.63 92 783786-74510
Temperature range -40 °F to 194 °F (-40 °C to 90 °C)
RAB 4 C 4 4.82 122 783786-74517
Cable range #12 AWG solid through 350 kcmil,
copper or aluminum RAB 5 C 5 6.00 152 783786-74527
Dimensions (W x H) 4.60" x 2.90" (117 mm x 74 mm) RAB 6 C 6 7.19 183 783786-74533
Certifications and standards RUS accepted RAB 8 C 8 9.56 243 783786-74543
ANSI C119.1 compliant RAB 10 C 10 11.94 303 783786-74484
— —
ABB Inc. We reserve the right to make technical We reserve all rights in this document
Electrification Products
7TKK000034 9.2018
changes or modify the contents of this and in the subject matter and illustrations
860 Ridge Lake Blvd. document without prior notice. With regard contained therein. Any reproduction or
Memphis, TN 38120 to purchase orders, the agreed particulars utilization of its contents – in whole or in
Customer Service: 800-816-7809 shall prevail. ABB Inc. does not accept any parts – is forbidden without prior written
responsibility whatsoever for potential consent of ABB Inc.
solutions.abb/ errors or possible lack of information in Copyright© 2018 ABB
cable-accessories-apparatus this document. All rights reserved

Homac RAB 350 Series Aluminum Flood-Seal Multi-Port Connectors

Uploaded by

Copyright:

Available Formats

Homac RAB 350 Series Aluminum Flood-Seal Multi-Port Connectors

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Homac RAB 350 Series Aluminum Flood-Seal Multi-Port Connectors

Uploaded by

Copyright:

Available Formats

—

Homac® RAB 350 series aluminum

Tethered pull-tab caps

Inward-sealing rockets Wide-spaced cable ports Tethered sealing caps

Material High-strength, high-conductivity —

Testing 100% hi-pot tested 4000 V for Length

You might also like