SAMPLE MATERIAL TEST CERTIFICATE

[In Accordance with EN 10204 : 2004 (E) Type 3.1]

TC NO. :- PSI/QC/E/0544-A/2023 DATE :- 21.08.2023

CLIENT NAME :- M/S. Rawabi Al Mahfar Trading
PO NO. :- -- DATE :----
Item Details as follow :- TYPE :- SMLS PROCESS OF MANUFACTURING :- COLD FORMED
Qty
Sr.No. Material Specification ITEM DESCRIPTION Size Schedule / Class Heat /Lot No
Nos

ASME SA 403 Gr.WP 316-S

1 90 DEG ELBOW, LR NPS 2 X SCH 40S,BW 44 RC 358
ASME SEC II PART-A EDITION.2021

CHEMICAL ANALYSIS RESULT ( % ) :-

Heat /Lot No C Mn P S Si Cr Ni Mo - - - - - - -
RC 358 0.022 1.420 0.019 0.008 0.485 16.950 10.240 2.090 - - - - - - -

MECHANICAL TEST RESULT :- ( AS PER ASME SA 370 EDITION.2019) - SPECIMEN SIZE - WIDTH . 12.50 MM ( Longitudinal Direction )

ELONGATION
Heat /Lot 0.2 % / YS UTS REDUCTION HARDNESS
%
No ( Mpa) ( Mpa) IN AREA % IN BHN
ON GL 50 MM

RC 358 321.00 601.20 47.20 - 179, 176, 179

MARKING DETAIALS :- MANUFACTURE'S LOGO / SIZE & SCHEDULE / PRODUCT MATERIAL SPEC. / LOT NO.

RAW MATERIAL DETAILS :- SA312 TP316 EDGE PREPARATION STDANDARD :- BW ENDS AS PER B16.25

VISUAL EXAMINATION :- Found Satisfactory DIMENSION STANDARD :- ASME B16.9

HEAT TREATMENT DETAILS :- Solution Annealing at 1050 deg C & Water Quenched.

REMARK :- LPT Test :- FOUND SATISFACTORY ( 100% ON FULL SURFACE )

UT Test :- N.A.
MPI Test :- N.A.
PMI TEST :- Found Satisfactory ( 100% )
**We hereby certify that the fitting was manufactured, sampled, tested and inspected in the specification and was found to meet the requirements.
Above fittings also meets to the requirements of ASME SA 960M.

FOR PRAVIN STEEL INDIA

 SAMPLE MATERIAL TEST CERTIFICATE
[In Accordance with EN 10204 : 2004 (E) Type 3.1]

TC NO. :- PSI/QC/E/0544-A/2023 DATE :- 21.08.2023

CLIENT NAME :- M/S. Rawabi Al Mahfar Trading

PO NO. :- -- DATE :----
Item Details as follow :- TYPE :- SMLS PROCESS OF MANUFACTURING :- COLD FORMED

Qty
Sr.No. Material Specification ITEM DESCRIPTION Size Schedule / Class Heat /Lot No
Nos

ASME SA 403 Gr.WP 316-S

1 90 DEG ELBOW, LR NPS 2 X SCH 40S,BW 44 RC 358
ASME SEC II PART-A EDITION.2021

CHEMICAL ANALYSIS RESULT ( % ) :-

Heat /Lot No C Mn P S Si Cr Ni Mo - - - - - - -

RC 358 0.022 1.420 0.019 0.008 0.485 16.950 10.240 2.090 - - - - - - -

MECHANICAL TEST RESULT :- ( AS PER ASME SA 370 EDITION.2019) - SPECIMEN SIZE - WIDTH . 12.50 MM ( Longitudinal Direction )

ELONGATION
0.2 % / YS UTS REDUCTION HARDNESS
Heat /Lot No %
( Mpa) ( Mpa) IN AREA % IN BHN
ON GL 50 MM

RC 358 321.00 601.20 47.20 - 179, 176, 179

MARKING DETAIALS :- MANUFACTURE'S LOGO / SIZE & SCHEDULE / PRODUCT MATERIAL SPEC. / LOT NO.
RAW MATERIAL DETAILS :- SA312 TP316 EDGE PREPARATION STDANDARD :- BW ENDS AS PER B16.25

VISUAL EXAMINATION :- Found Satisfactory DIMENSION STANDARD :- ASME B16.9

HEAT TREATMENT DETAILS :- Solution Annealing at 1050 deg C & Water Quenched.

REMARK :- LPT Test :- FOUND SATISFACTORY ( 100% ON FULL SURFACE )

UT Test :- N.A.
MPI Test :- N.A.
PMI TEST :- Found Satisfactory ( 100% )
**We hereby certify that the fitting was manufactured, sampled, tested and inspected in the specification and was found to meet the requirements.
Above fittings also meets to the requirements of ASME SA 960M.

FOR PRAVIN STEEL INDIA