Scribd
Upload
473 views7 pages

I1profiler - Instruction - Eng

1. The document provides instructions for measuring color accuracy using two different profiling devices, i1Profiler and Curve4. 2. For i1Profiler, the instructions are to load a workflow, select a measurement tool, click measure, save as a CGATS file and check the reflectance spectrum option. 3. For Curve4, the instructions are to create a new calibration, select a measurement page, choose a tool and test chart, select a measurement mode, then export and import the measurement file into a G7 expert report.

Uploaded by

hung nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
473 views7 pages

I1profiler - Instruction - Eng

1. The document provides instructions for measuring color accuracy using two different profiling devices, i1Profiler and Curve4. 2. For i1Profiler, the instructions are to load a workflow, select a measurement tool, click measure, save as a CGATS file and check the reflectance spectrum option. 3. For Curve4, the instructions are to create a new calibration, select a measurement page, choose a tool and test chart, select a measurement mode, then export and import the measurement file into a G7 expert report.

Uploaded by

hung nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 7

Measured by using i1Profiler

1. Activate i1Profiler
2. Choose: Advanced Mode, CMYK Printer
and Measure Reference Chart

CMYK
Printer
Advanced
Measure Mode
Reference
Chart
Measured by using i1Profiler
3. Click the “Load Workflow” button at the bottom
right, choose P2P51/ P2P25.rwxf document
4. Choose the measurement tool, then click
the circle button at the bottom right
Choose the
measurement
tool

Circle button

Load Workflow button


Measured by using i1Profiler
5. Click the Measured button under the test chart
6. When finished the measurement, please click
the “Save” button under the Test Chart
7. Save the document as i1Profiler CGATS Custom
（*.TXT ）
8. In the Custom CGATS setup dialog box, you
need to check “Reflectance Spectrum” every
time when you save the measurement setting
Measured by using i1Profiler

Reflectance
Spectrum
Measured by using Curve4
1. Create a new calibration
2. Choose “Measure”, then open the
measurement page
Measured by using Curve4
1 2
1. Choose
measurement
tool under the
Measurement
Window
2. Choose the
test chart
3. Choose
measurement
mode “M0, M1
or M2”
Measured by using Curve4
• After measured by Curve4, choose
“Export Measurement File” under “File”
• Then import the measurement file to G7
expert report

You might also like