Scribd
Upload
243 views1 page

Analog Component Trainer Kit

The DTK-03B is an analog component trainer on a single board used to educate engineers about active and passive components. It contains resistor, capacitor and inductor banks, voltage regulators, transistors, diodes, a relay, and other components. Students can perform experiments by connecting the components via 2mm banana sockets. The trainer kit comes with a user manual and sample experiment programs.

Uploaded by

Anil Fauzdar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
243 views1 page

Analog Component Trainer Kit

The DTK-03B is an analog component trainer on a single board used to educate engineers about active and passive components. It contains resistor, capacitor and inductor banks, voltage regulators, transistors, diodes, a relay, and other components. Students can perform experiments by connecting the components via 2mm banana sockets. The trainer kit comes with a user manual and sample experiment programs.

Uploaded by

Anil Fauzdar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DIGITAL/ANALOG LAB

.....a total solution for Educational Lab Trainers

DTK-03B on 2mm banana sockets


! On board Two Input Switches & Two Output
ANALOG COMPONENT TRAINER
Led Indicator
! Variable potentiometers of 1K, 100K
provided on board
! 20 Pin Vero Socket with output terminated in
2mm Socket
! Fixed DC Power Supply: ±12V.
! Variable DC Power supply of 0 to +15V & 0
to 30V.
! AC Power Supply of 15V-0-15V-
! All interconnections are made using 2mm
socket.
! All ICS are mounted on IC Sockets.
! Bare board Tested Glass Epoxy SMOBC
DTK-03B is a Single Board Trainer Kit which PCB is used.
is widely used to train engineers to ! Attractive ABS Enclosure.
Develop/Study hardware for any Active & ! User’s Manual with sample experimental
Passive components in laboratory. This board programs
having Resistor bank, capacitor bank,
Inductor bank, Regulators, Transistors,
Diodes, Relay etc for experimenting the
active & Passive component techniques. .
Specifications
! Resistor Bank ranging from 10 ohm to 1M
ohm
! Capacitor Bank ranging from 1Kpf - 1micro
farad
! Inductor Bank (10nos)
! Voltage regulators one each IC-7805, 7905
! Transistors one each NPN-BC547,SL100,
PNP-BC558,SK100
! JFET 2N3819, MOSFET BS170, DIAC
DB3, UJT 2N6027, SCR TYN612, TRAIC
BT136
! Diodes 1N 4007 (4 Nos.), Diode 1N4148,
Diode OA79, Zener Diodes 1.2V, 5.1V, 12V
! 12V SPDT Relay with outputs NC, NO &
Common terminated on 2mm banana
sockets
! On board Thermistor, Photodiode & LDR.
! One 8ohm Speaker with outputs on 2mm
banana sockets
! One five mm LED with outputs terminated

Note : Specifications can be altered without notice in our constant efforts for improvement.

Kitek Technologies Pvt. Ltd., B-4, Lotus C.H.S., Plot No. 8, Sector - 7, Airoli, Navi Mumbai - 400708.
Tel.: 65116548 u Telefax : 27694323 u Email: [email protected] u Web : www.kitektechnologies.com

You might also like