This document provides details of a V-belt calculation for transferring power between two pulleys. It lists the specifications of the V-belt and pulleys used, including the belt type, length, speed of each pulley, and their diameter and distance between centers. Calculations are shown for the forces on the belt during operation and while under pretension, both based on catalog values and accounting for the coefficient of friction.
This document provides details of a V-belt calculation for transferring power between two pulleys. It lists the specifications of the V-belt and pulleys used, including the belt type, length, speed of each pulley, and their diameter and distance between centers. Calculations are shown for the forces on the belt during operation and while under pretension, both based on catalog values and accounting for the coefficient of friction.
This document provides details of a V-belt calculation for transferring power between two pulleys. It lists the specifications of the V-belt and pulleys used, including the belt type, length, speed of each pulley, and their diameter and distance between centers. Calculations are shown for the forces on the belt during operation and while under pretension, both based on catalog values and accounting for the coefficient of friction.
This document provides details of a V-belt calculation for transferring power between two pulleys. It lists the specifications of the V-belt and pulleys used, including the belt type, length, speed of each pulley, and their diameter and distance between centers. Calculations are shown for the forces on the belt during operation and while under pretension, both based on catalog values and accounting for the coefficient of friction.
Length factor [c3] 0.980 Load coefficient for input to the fast [f2] 1.000 Nominal power acc. catalogue (kW) [P] 2.560 Additional power due to ratio (kW) [dP] 0.213
1/3 Belt speed (m/s) [v] 7.85 Frequency of bending (Hz) [fB] 11.22 Slip (%) [s] 0.57 Circumferential force (from torque) (N) [Fu] 254.67 Centrifugal force (N) [Ff] 4.44
PRETENSION ACCORDING CATALOGUE
Test force (N) [Fe] 25.00
Slack (mm) [te] 10.65 End of rope force in stand (N) [Fstat] 204.94 End of rope force in no load / load (N) [Ft] 73.17 / 327.83 Critical speed for no load / load (m/s) [vcrit] 32.83 / 67.93 Tension distance (mm) [sw] 3.26
Sheave 1 Sheave 2 ------- ------- Radial force in service (N) [Fab] 399.59 399.59 Radial force standing. (N) [Fas] 407.47 407.47
PRETENSION ACCORDING CALCULATION WITH COEF. OF FRICTION (MIN: VALUES)
(Calculation according Niemann, Book III, with rope friction law)
Coefficient. of friction [my] 1.30 End of rope force in stand (N) [Fstat] 137.59 End of rope force in no load / load (N) [Ft] 5.82 / 260.48 Critical speed for no load / load (m/s) [vcrit] 11.94 / 60.66 Tension distance (mm) [sw] 2.19
Sheave 1 Sheave 2 ------- ------- Radial force in service (N) [Fab] 266.17 266.17 Radial force standing. (N) [Fas] 273.56 273.56
