8/22/23, 10:51 AM What is GD&T?

| GD&T Basics

About Us Contact Us Course Login Industries

Training Free GD&T Symbols GET GD&T

Pricing TRAINING
Options Resources Guide

← Back to Blog

What is Geometric Dimensioning

and Tolerancing (GD&T)?
by Crystal Bemis on June 9, 2021.

What is GD&T? If you are involved in design or manufacturing, you may be familiar with the
term, “GD&T,” or “Geometric Dimensioning and Tolerancing”. Geometric Dimensioning and
Tolerancing is a set of rules and GD&T symbols used on a drawing to communicate the
intent of a design, focusing on the function of the part. Using GD&T results in a more
accurate design, larger tolerances for less important design features, and cost savings for
manufacturing.

History of GD&T
How did GD&T come about? Near the beginning of World War II, a man named Stanley
Parker was working at the Royal Torpedo Factory in Alexandria, West Dunbartonshire,
https://www.gdandtbasics.com/what-is-gdt/ 1/7
8/22/23, 10:51 AM What is GD&T? | GD&T Basics

Scotland. Parker realized that there were parts that met functional requirements that were
being rejected due to out of tolerance measurements. He went on to develop tolerancing
practices to address the functional requirements of a part. Parker published the first work on
GD&T in 1940, titled, “Notes on Design and Inspection of Mass Production Engineering
Work.” He published another title in 1956, “Drawings and Dimensions.” Parker developed
the concept of “True Position” and is credited with being the originator of GD&T.

The first standards for GD&T were developed by the US military in the 1940s. MIL-STD-8
was published in 1949, and was revised in 1953 to include GD&T “Rule 1.” Then in 1957,
the American Society of Mechanical Engineers (ASME) published their first standard
incorporating GD&T, ASA Y14.5. The ASME Y14.5 standard has been revised approximately
every 10 years to address new concepts and new technology, with the most recent revision
released in 2018.   Another popular set of GD&T standards in use worldwide has been
published by the International Organization for Standardization (ISO). In 1996, the ISO
Technical Committee 213 was formed to create and maintain ISO Geometrical Product
Specifications (GPS). For a comparison of ASME and ISO GD&T standards and their
usage, check out “A Comparison of GD&T Standards: ISO GPS vs. ASME Y14.5.”

Benefits of GD&T
Many companies from a variety of industries are using GD&T. ASME lists several well-
known companies that have purchased the GD&T standard, ASME Y14.5, including General
Electric, Honeywell, Lockheed Martin, Ford Motor, Eastman Kodak, Hewlett-Packard, and
many more.

So, why are so many successful companies using GD&T, rather than simple coordinate
dimensioning and tolerancing? GD&T allows the designer to communicate the design intent,
and is a focus on the function of the part. By focusing on the function of a part, less
important tolerances may be loosened. Loosened tolerances result in a part that is easier
and cheaper to produce.

The design of a mirror is a great example of this concept. The intent of the design of a mirror
is for it to be flat to prevent a distorted reflection. Using coordinate dimensioning and
tolerancing, you could try to avoid a wavy surface by adding a tight thickness tolerance to
the drawing. However, the thickness could be measured at several points, each point
passing inspection, and the mirror still have a wavy surface. This situation is prevented
using GD&T. As seen in Figure 1, a flatness symbol would be used to show the intent of the
design. By focusing on the function and indicating the desired form (a flat surface), the
thickness tolerance could be loosened, resulting in a part that meets the function
requirements and is easier to produce.

https://www.gdandtbasics.com/what-is-gdt/ 2/7
8/22/23, 10:51 AM What is GD&T? | GD&T Basics

Figure 1: Drawing of a Mirror Using GD&T

For more information on the advantages using of GD&T, including benefits to inspection and
an in-depth discussion of tolerance, see “Advantages of GD&T vs. Coordinate Tolerancing.”

Basics of GD&T
As mentioned previously, Geometric Dimensioning and Tolerancing is used to show the
intent of a design that coordinate dimensioning and tolerances alone do not show. This is
done by considering SLOF when creating the design, and by applying geometric controls to
the drawing.

What is SLOF? There are four components to making sure that your drawing indicates the
geometric and size requirements of each feature. These four requirements are known as
SLOF: size, location, orientation, and form.

https://www.gdandtbasics.com/what-is-gdt/ 3/7
8/22/23, 10:51 AM What is GD&T? | GD&T Basics

Figure 2: What is SLOF?

Size refers to the physical size of a feature. This is usually controlled by the normal ±
tolerancing you are used to seeing, although Profile can also control size.

Location is the location of the feature in 3D space, relative to other features. Most
commonly Position is used for this type of control.

Orientation is how your part is angled, or oriented in 3D space, relative to other features.
Orientation symbols are used as a further refinement of location. Commonly, Parallelism,
Perpendicularity, and Angularity are used to control these. Although many other symbols
also will indirectly control the orientation, such as Runout.

Finally, Form refers to the overall shape of the feature. Form symbols, such as straightness,
flatness, circularity, and cylindricity, are final refinements and are only used when
functionally necessary.

For the best free GD&T guide and a comprehensive overview of each callout – visit our
GD&T symbols page.

To apply the geometric controls to a feature on a GD&T drawing, a feature control frame is
used. A feature control frame includes four pieces of information – the GD&T symbol, the
tolerance zone type and dimensions, tolerance zone modifiers, and datum references (when
required).

Figure 3 is an example of a feature control frame, and Figure 4 shows how this feature
control frame would be read.

https://www.gdandtbasics.com/what-is-gdt/ 4/7
8/22/23, 10:51 AM What is GD&T? | GD&T Basics

Figure 3: Feature Control Frame

Figure 4: Reading a Feature Control Frame

Meeting all four SLOF components and properly applying geometric controls to your
drawing will ensure that your part can be produced accurately and consistently.

Where to Learn More

If you are looking for more information on GD&T, you’re in the right place. GD&T Basics is
the #1 free online resource for Geometric Dimensioning and Tolerancing training. In addition
to our different training programs and courses, we offer tons of free resources.

Register today for your Free GD&T Wall Chart and receive exclusive training videos, weekly
industry insights, and other helpful tips. You can also visit our blog for best practices, helpful
explanations, and simple advice for using GD&T in the real world.

Want to get more GD&T training for free?

Download our free GD&T symbols chart when you subscribe to our weekly email
newsletter.
https://www.gdandtbasics.com/what-is-gdt/ 5/7
8/22/23, 10:51 AM What is GD&T? | GD&T Basics

GET MY FREE CHART

Share On

Categories

✱ GD&T & Print Reading Basics

Company GD&T Basics Training

About Us GD&T Training

GD&T Advice & Blog Plans & Pricing
Industries We Work With Corporate Training
FAQ Public Training
Careers GD&T Training in UK & Ireland
Engineer Essentials LLC -
creators of GD&T Basics UK & Ireland Partnership
1708-C Augusta St.
Suite 225
Greenville, SC 29605

Resources Contact Us

Student Login Companies & Groups

GD&T Symbols Chart PDF Academic Partnership Program
Learn GD&T Symbols General Questions
Guide to Team GD&T Training
GD&T Knowledge Quiz
https://www.gdandtbasics.com/what-is-gdt/ 6/7
8/22/23, 10:51 AM What is GD&T? | GD&T Basics

Print Reading Skills Quiz

Industry Readlines Newsletter

©GD&T Basics / Engineer Essentials LLC

Privacy Policy and Terms of Service

https://www.gdandtbasics.com/what-is-gdt/ 7/7