Scribd
Upload
49 views3 pages

Watchguard System Config Mib

This document defines a MIB module for WatchGuard Firebox system configuration. It describes objects used for system-wide traps, including alarm ID, label, time, level, hostname, and message. It also defines traps that are sent for alarms, SNMP shutdown, and SNMP start. Trap generation for alarms can be enabled or disabled.

Uploaded by

sushriya14
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
49 views3 pages

Watchguard System Config Mib

This document defines a MIB module for WatchGuard Firebox system configuration. It describes objects used for system-wide traps, including alarm ID, label, time, level, hostname, and message. It also defines traps that are sent for alarms, SNMP shutdown, and SNMP start. Trap generation for alarms can be enabled or disabled.

Uploaded by

sushriya14
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

WATCHGUARD-SYSTEM-CONFIG-MIB DEFINITIONS ::= BEGIN

IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32,
Integer32, Unsigned32, IpAddress, Gauge32,
enterprises, NOTIFICATION-TYPE FROM SNMPv2-SMI
watchguard FROM WATCHGUARD-SMI;

wgSystemConfigMIB MODULE-IDENTITY
LAST-UPDATED "200811100000Z"
ORGANIZATION "WatchGuard Technologies, Inc."
CONTACT-INFO
" WatchGuard Technologies, Inc.

505 Fifth Avenue South


Suite 500
Seattle, WA 98104
United States

+1.206.613.6600 "

DESCRIPTION
"This MIB module defines WatchGuard Firebox system
configuration."
REVISION "200701251200Z"
DESCRIPTION
"Initial revision."
REVISION "200811100000Z"
DESCRIPTION
"Updated CONTACT-INFO."
::= { watchguard 2 }

-- significant branches

wgSysTraps OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object for system wide traps
in this entity."
::= { wgSystemConfigMIB 3 }

wgSysTrapObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object for objects which are used
as part of traps."
::= { wgSystemConfigMIB 4 }

wgSysTrapControl OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all objects
which are trap control for the entity."
::= { wgSystemConfigMIB 5 }

--
-- wgSysTraps
--
-- object used in trap reporting

wgAlarmId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the alarm that generates a trap."
::= { wgSysTrapObjects 1 }

wgAlarmLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the alarm that generates a trap."
::= { wgSysTrapObjects 2 }

wgAlarmTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time of the alarm that generates a trap."
::= { wgSysTrapObjects 3 }

wgAlarmLevel OBJECT-TYPE
SYNTAX INTEGER {
normal(4),
warning(3),
error(2),
critical(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level of an alarm generated."
::= { wgSysTrapObjects 4 }

wgAlarmHostname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The host name of the system where alarm occurred"
::= { wgSysTrapObjects 5 }

wgAlarmMsg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The message describing the nature of this alarm."
::= { wgSysTrapObjects 6 }

--
-- trap control
--
wgAlarmTrapEnable OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether wgAlarmTrap trap should be generated."
DEFVAL { true }
::= { wgSysTrapControl 1 }

--
-- traps themselves
--

wgSysTrapsPrefix OBJECT-IDENTITY
STATUS current
DESCRIPTION ""
::= { wgSysTraps 0 }

wgAlarmTrap NOTIFICATION-TYPE
OBJECTS {
wgAlarmId,
wgAlarmLabel,
wgAlarmTime,
wgAlarmLevel,
wgAlarmHostname,
wgAlarmMsg
}
STATUS current
DESCRIPTION
"An alarm was raised by Monitoring Agent of this
WatchGuard entity."
::= { wgSysTrapsPrefix 1 }

wgSnmpShutdown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap is sent when the snmp terminates."
::= { wgSysTrapsPrefix 2 }

wgSnmpStart NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap is sent when the snmp starts."
::= { wgSysTrapsPrefix 3 }

END

You might also like