Scribd
Upload
316 views1 page

M16x1.5 (MM)

This document provides specifications for M16 x 1.5-6g and M16 x 1.5-6H metric screw threads, including dimensions for the external and internal threads, wire diameters, constants, and tap drill sizes. Key dimensions listed are the major diameter, minor diameter, pitch diameter, root radius, and height for both external and internal threads. Tolerances are provided for pitch diameters and other critical dimensions.

Uploaded by

cafortin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
316 views1 page

M16x1.5 (MM)

This document provides specifications for M16 x 1.5-6g and M16 x 1.5-6H metric screw threads, including dimensions for the external and internal threads, wire diameters, constants, and tap drill sizes. Key dimensions listed are the major diameter, minor diameter, pitch diameter, root radius, and height for both external and internal threads. Tolerances are provided for pitch diameters and other critical dimensions.

Uploaded by

cafortin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Metric M Profile - Coarse And Fine Pitch Series

Data for M16 x 1.5-6g and M16 x 1.5-6H


Values are displayed in metric units. Pre-coat values are in parentheses.
External PD tolerance is based on a length of engagement of 10.800
Internal PD tolerance is based on a length of engagement of 10.800

External Thread Internal Thread


M16 x 1.5-6g M16 x 1.5-6H Wire Diameters
Max . . . . . . . . . . . 1.5156
Allowance . . . . . . . . . 0.032 Allowance . . . . . . . . . 0.000 Min . . . . . . . . . . . 0.7577
Best . . . . . . . . . . . 0.8654
Major Diameter Minor Diameter Alternate . . . . . . . . 0.8654
Max . . . . . . . . . . . 15.968 Min . . . . . . . . . . . 14.376
Min . . . . . . . . . . . 15.732 Max . . . . . . . . . . . 14.676 Constants
Mean . . . . . . . . . . . 15.866 Mean . . . . . . . . . . . 14.526 Best . . . . . . . . . . . 1.2986
Alternate . . . . . . . . 1.2986
Pitch Diameter Pitch Diameter
Max . . . . . . . . . . . 14.994 Min . . . . . . . . . . . 15.026 Measurement Over Wires
Min . . . . . . . . . . . 14.854 Max . . . . . . . . . . . 15.216 Max . . . . . . . . . . . 16.293
Tol . . . . . . . . . . . . 0.140 Tol . . . . . . . . . . . . 0.190 Min . . . . . . . . . . . 16.153

Minor Diameter Major Diameter


Max . . . . . . . . . . . 14.344 Min . . . . . . . . . . . 16.000
Min . . . . . . . . . . . 13.930 Max . . . . . . . . . . . 16.407

Threads Per Inch . . . . . . --


Root Radius Height
Pref . . . . . . . . . . . 0.217 Basic . . . . . . . . . . . 0.812 Starts . . . . . . . . . . . . 1
Min . . . . . . . . . . . . 0.188
Coating Buildup Pitch . . . . . . . . . . . 1.500
Max . . . . . . . . . . . . 0.000
Height Lead . . . . . . . . . . . 1.500
Min . . . . . . . . . . . . 0.000
Basic . . . . . . . . . . . 0.920
Lead Angle . . . . . . . . 1.824

Coating Buildup Included Angle . . . . . . . 60°


Tap Drills-Cut Tap Percent Thread
Max . . . . . . . . . . . . 0.000
Drill Size Diameter Percent Diameter Spec . . . . . ASME B1.13M-2005
Min . . . . . . . . . . . . 0.000
14.25mm --- 14.250 100% -- 14.050
9/16 --- 14.288 90% -- 14.245
14.30mm --- 14.300 80% -- 14.440
The screw thread dimensions 14.40mm --- 14.400
75% -- 14.537
displayed here are calculated 70% -- 14.635
using data and formulas found 14.50mm --- 14.500
65% -- 14.732
in recognized national and 14.60mm --- 14.600 60% -- 14.830
international standards and 37/64 --- 14.684 55% -- 14.927
specifications.
14.70mm --- 14.700 50% -- 15.025

You might also like