Scribd Logo
Upload

Welcome to Scribd!

  • 118 views

    Nuflo 1502 Weco Union Liquid Turbine Flow Meter Datasheet

    Uploaded by

    Pad Tru
    The document describes the NUFLO 1502 WECO Union high-pressure liquid turbine flowmeter. It can withstand rugged oilfield conditions due to its tungsten carbide shaft and bearings. As liquid flows through it, the rotor turns at a speed proportional to flow rate. This generates electrical pulses transmitted to readout equipment. It provides accurate and repeatable measurement for applications like well cleanouts and cementing. It has a 2-4 inch connection, temperature range of -55 to 232°C, and is certified for hazardous locations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Nuflo 1502 Weco Union Liquid Turbine Flow Meter Datasheet

    Uploaded by

    Pad Tru
    118 views3 pages
    The document describes the NUFLO 1502 WECO Union high-pressure liquid turbine flowmeter. It can withstand rugged oilfield conditions due to its tungsten carbide shaft and bearings. As liquid flows through it, the rotor turns at a speed proportional to flow rate. This generates electrical pulses transmitted to readout equipment. It provides accurate and repeatable measurement for applications like well cleanouts and cementing. It has a 2-4 inch connection, temperature range of -55 to 232°C, and is certified for hazardous locations.

    Original Title

    Nuflo-1502-Weco-union-liquid-turbine-flow-meter-datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the NUFLO 1502 WECO Union high-pressure liquid turbine flowmeter. It can withstand rugged oilfield conditions due to its tungsten carbide shaft and bearings. As liquid flows through it, the rotor turns at a speed proportional to flow rate. This generates electrical pulses transmitted to readout equipment. It provides accurate and repeatable measurement for applications like well cleanouts and cementing. It has a 2-4 inch connection, temperature range of -55 to 232°C, and is certified for hazardous locations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    118 views3 pages

    Nuflo 1502 Weco Union Liquid Turbine Flow Meter Datasheet

    Uploaded by

    Pad Tru
    The document describes the NUFLO 1502 WECO Union high-pressure liquid turbine flowmeter. It can withstand rugged oilfield conditions due to its tungsten carbide shaft and bearings. As liquid flows through it, the rotor turns at a speed proportional to flow rate. This generates electrical pulses transmitted to readout equipment. It provides accurate and repeatable measurement for applications like well cleanouts and cementing. It has a 2-4 inch connection, temperature range of -55 to 232°C, and is certified for hazardous locations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    MEASUREMENT SOLUTIONS

    NUFLO 1502 WECO Union


    High-pressure liquid turbine flowmeter

    APPLICATIONS The NUFLO 1502 WECO Union* high-pressure liquid


    + High-pressure water injection trials turbine flowmeter incorporates a tungsten carbide shaft
    + Scale inhibitor treatments and bearings to withstand rugged oilfield conditions while
    + Well cleanouts with coiled tubing maintaining operational and measurement integrity.
    + Tubing valve opening and closing
    As liquid flows through the meter and over the rotor, the rotor turns at a speed that is
    + Mud and cementing operations
    directly proportional to the flow rate. A magnetic pickup senses the rotor blades as they
    (displacement volume monitoring)
    pass and generates an electrical (sine wave) signal. Then, these electrical pulses are
    + Flowback of treatment fluids transmitted to the flow measurement readout equipment. Optional rotor configurations
    and finishes enable the metering of erosive or corrosive fluids such as mud or cement
    BENEFITS
    slurries and acids. The meter should be flushed with clean water following the use of
    + Rugged enough to withstand any erosive or corrosive fluids.
    continual rig-up and rig-down
    + Accurate and repeatable
    measurement
    + Quick installation
    + Minimized maintenance requirements
    + Long service life, even in severe
    applications

    NUFLO 1502 WECO Union high-pressure liquid turbine flowmeter


    NUFLO 1502 WECO Union

    Specifications
    Accuracy, % ±1.0 standard grade
    Repeatability, % ±0.05
    End connections 2-in, 3-in, or 4-in 1502 WECO Union (10K sour service or 15K sweet service)
    3-in 2002 WECO Union (20K sweet service)
    Magnetic pickups × 2 for local and remote monitoring
    Temperature range (magnetic pickup), degF [degC] Standard: –67 to 250 [–55 to 121]
    Medium: –67 to 450 [–55 to 232] (requires high-temperature magnetic pickup)
    Mating output connection AN3106A-10SL-4S
    Compliances CSA Certified Hazardous Locations Class I, Group A, B, C, D
    CE marked for Pressure Equipment Directive (PED)

    Materials of Construction
    Meter body A286 stainless steel
    Meter vanes 316L stainless steel
    Rotor shaft and bearings Tungsten carbide
    Union nut Carbon steel
    Magnetic pickup receptacle 316L stainless steel

    Upstream: 10 diameters Downstream: 5 diameters

    Straight pipe must be installed upstream and downstream of the flowmeter

    Meter Options Installation


    + Binderless carbide shaft for enhanced corrosion resistance + The meter should be installed with the arrow on the meter body
    to selected chemicals corresponding to flow direction of the line.
    + Silver-brazed shaft to withstand temperatures to 450 + A length of straight pipe—usually a pup joint of 2-, 3-, or
    degF [232 degC] and chemicals that attack bearing 4-in 1502 treating iron—must be installed upstream and
    bonding materials downstream of the flowmeter.
    + Nickel-plated rotors for enhanced corrosion resistance to + Valves or chokes should be located downstream of the
    selected chemicals (especially acids that corrode ferrous flowmeter.
    materials)
    + Modified rotors for cement slurry or mud applications
    + Internal sets for measuring high-pressure gases, including
    nitrogen and carbon dioxide
    NUFLO 1502 WECO Union

    Linear Flow Range †, ‡, §


    Flowmeter Flow Rate Nominal‡ Calibration Maximum Output ΔP at Maximum
    Size§, in [mm] galUS/min m3/h bbl/d Factor, Pulses/galUS Frequency, Flow‡, psi [kPa]
    [Pulses/1,000/m3] Pulses/s
    1 [25] 5–50 1.14–11.36 170–1,700 900 [238] 750 20 [138]
    1.50[38] 15–180 3.41–40.88 515–6,000 325 [86] 975 16 [110]
    2 [51] 40–400 9.09–90.85 1370–13,700 55 [14.5] 365 22 [152]
    3 [76] 80–800 18.16–181.66 2750–27,500 57 [15.2] 760 20 [138]
    4 [102] 100–1,200 22.71–272.55 3400–41,000 30 [7.9] 600 10 [69]
    † The linear flow range of liquids with nonlubricating characteristics is limited to the upper 60% of rating.
    ‡ Based on water.
    § Consult a Sensia representative for liquid applications with viscosity above 5 centistokes.
    Note: The meter will remain accurate at flow rates higher than its rating, but bearing wear and pressure drop across the meter can shorten the life span of the meter.
    Flowmeters can be overranged by 10% for short periods without significant effect. Traceability of pressure-containing components available on request.

    sensiaglobal.com
    Add intelligent action to your oil & gas solutions
    © Sensia LLC 2021. All rights reserved. 276A-CO-0921-PS
    * Mark of Sensia. Other company, product, and service names are the properties of their respective owners.

    You might also like