Scribd Logo
Upload

Welcome to Scribd!

  • 62 views

    TDS - LUBRILOG Distributed by TOTAL - LUBRICLEAN EP - F6N - 201401 - EN

    Uploaded by

    Daniel Caviedes
    LUBRICLEAN EP is a solvent made from vegetable chemistry that is chlorine, aromatic, and VOC free. It evaporates slowly leaving behind an oily film with extreme pressure properties that can be emulsified with water. LUBRICLEAN EP is used to clean dirty metallic surfaces covered in hydrocarbons and petrol residues on items like chains, gears, cables, and racks between 20-60°C. It has a kinematic viscosity of 2.95 mm2/s, flash point of 130°C, passes a 4 ball weld test over 500 daN, and is over 95% biodegradable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TDS - LUBRILOG Distributed by TOTAL - LUBRICLEAN EP - F6N - 201401 - EN

    Uploaded by

    Daniel Caviedes
    62 views1 page
    LUBRICLEAN EP is a solvent made from vegetable chemistry that is chlorine, aromatic, and VOC free. It evaporates slowly leaving behind an oily film with extreme pressure properties that can be emulsified with water. LUBRICLEAN EP is used to clean dirty metallic surfaces covered in hydrocarbons and petrol residues on items like chains, gears, cables, and racks between 20-60°C. It has a kinematic viscosity of 2.95 mm2/s, flash point of 130°C, passes a 4 ball weld test over 500 daN, and is over 95% biodegradable.

    Original Description:

    Lubriclean

    Original Title

    TDS_LUBRILOG distributed by TOTAL_LUBRICLEAN EP_F6N_201401_EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    LUBRICLEAN EP is a solvent made from vegetable chemistry that is chlorine, aromatic, and VOC free. It evaporates slowly leaving behind an oily film with extreme pressure properties that can be emulsified with water. LUBRICLEAN EP is used to clean dirty metallic surfaces covered in hydrocarbons and petrol residues on items like chains, gears, cables, and racks between 20-60°C. It has a kinematic viscosity of 2.95 mm2/s, flash point of 130°C, passes a 4 ball weld test over 500 daN, and is over 95% biodegradable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    62 views1 page

    TDS - LUBRILOG Distributed by TOTAL - LUBRICLEAN EP - F6N - 201401 - EN

    Uploaded by

    Daniel Caviedes
    LUBRICLEAN EP is a solvent made from vegetable chemistry that is chlorine, aromatic, and VOC free. It evaporates slowly leaving behind an oily film with extreme pressure properties that can be emulsified with water. LUBRICLEAN EP is used to clean dirty metallic surfaces covered in hydrocarbons and petrol residues on items like chains, gears, cables, and racks between 20-60°C. It has a kinematic viscosity of 2.95 mm2/s, flash point of 130°C, passes a 4 ball weld test over 500 daN, and is over 95% biodegradable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Version : January 2014

    DESCRIPTION
    LUBRICLEAN EP is a “green” solvent issued from vegetable chemistry. LUBRICLEAN EP is
    certified without chlorine, aromatics and none VOC (volatile organic compounds). After
    application on surfaces to be cleaned, LUBRICLEAN EP evaporates slowly at ambient
    temperature and leaves a thin oily film with extreme pressure properties. The film is easily
    TECHNICAL DATA SHEET

    emulsifiable with water if complete degreasing is required.

    TYPICAL APPLICATIONS
    LUBRICLEAN EP scours and cleans, during running under heavy loads, the dirty metallic
    surfaces covered by hydrocarbons and petrol cockefied residues as calcined lacquer such as:
    - All size chains.
    - Open gears.
    - Cables and racks gearing.
    LUBRICLEAN EP can be used by average pressure spray gun on metallic parts which are to be
    treated on the temperature range of 20 to 60°C.

    TECHNICAL CHARACTERISTICS

    PROPERTIES VALUES UNITS STANDARDS


    Colour amber (visual)
    Base oil vegetal
    Kinematic viscosity (40°C) 2.95 mm²/s ISO 3104
    Flash point 130 °C ISO 2592
    4 balls weld test >500 daN ASTM D 2596
    Copper corrosion 1b quote ISO 2160
    Biodegradibility >95 % OECB 301 B

    All information contained here is given in good faith. It is provided without warranty, express or implied, and is subjected to change without notice.

    You might also like