Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    INVB4000 LED Eng

    Uploaded by

    Андрей Олененко
    The document describes an inverter model INVB4000. It provides specifications for the inverter including its efficiency over 88%, integrated static bypass, high frequency switching end stage, and 19" plug-in housing. It lists electrical safety certifications and input/output power specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    INVB4000 LED Eng

    Uploaded by

    Андрей Олененко
    35 views1 page
    The document describes an inverter model INVB4000. It provides specifications for the inverter including its efficiency over 88%, integrated static bypass, high frequency switching end stage, and 19" plug-in housing. It lists electrical safety certifications and input/output power specifications.

    Original Title

    INVB4000_LED_Eng

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes an inverter model INVB4000. It provides specifications for the inverter including its efficiency over 88%, integrated static bypass, high frequency switching end stage, and 19" plug-in housing. It lists electrical safety certifications and input/output power specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views1 page

    INVB4000 LED Eng

    Uploaded by

    Андрей Олененко
    The document describes an inverter model INVB4000. It provides specifications for the inverter including its efficiency over 88%, integrated static bypass, high frequency switching end stage, and 19" plug-in housing. It lists electrical safety certifications and input/output power specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Inverter INVB4000

    Efficiency > 88 %

    Built-in electronic, static bypass

    Without 50 Hz transformer

    High-frequency switching of the end stage

    Robust IGBT end stage

    Low output impedance Picture may differ from actual device

    19" plug-in case

    Specifications
    General Housing 19''- plug-in case
    Electrical safety EN 60950, VDE 0805 Size 3 U / 84 HP, 360 mm depth
    Efficiency > 88 % at nominal load Weight approx. 13.5 kg
    Galvanic isolation 3.75 kVDC Classification IP 20
    EMC (emission) EN 50081-1 Cooling 2 internal, regulated fans
    curve EN 55022A
    EMC (immunity) EN 50082-2 Electrical connections
    Operating temperature -5°C to +50°C, non condensing Input DC 3 high current terminal blocks
    +50°C to +70°C, 2%/K derating Phoenix HDFK 16 mm2
    Input AC Phoenix Power-Combicon plug
    Input DC Output AC Phoenix Power-Combicon plug
    INVB4000-48/60 48/60 VDC (38 – 72 VDC) Alarm Binder round connector
    INVB4000-110 110 VDC (88 – 132 VDC)
    INVB4000-125 125 VDC (88 – 148 VDC) All electrical connections are located on the front.
    INVB4000-220 220 VDC (178 – 264 VDC)
    Special features
    Output AC Inverter with integrated static bypass for automatic load
    Voltage 230 VAC switch from mains to inverter or vice versa (with voltage
    failure tolerance +/-5% synchronization).
    Frequency 50 Hz (60 Hz),
    sinewave processor controlled Switching time: typically 4 ms
    Output power 4 kVA / 3200 W
    Power factor 0.8 The LED bar on the front panel displays the output power
    Load range 0 – 100 % of the inverter. Each LED signals 25 % of the nominal
    Crestfactor > 2.5 load.
    Harmonic distortion <2%

    Signals
    Visual LEDs for load display, bypass Warranty 24 months
    status and “Power Good”/ON
    Electrical potential-free alarm contacts for Order code INVB4000-48/60-230
    “Power Good” and bypass status INVB4000-110-230
    INVB4000-125-230
    Operation battery switch, INVB4000-220-230
    push button for setup

    Subject to change without notice. © Power Innovation GmbH Version 2.4

    Power Innovation GmbH Telefon: +49 (0) 4202 5117-0 Amtsgericht Walsrode Geschäftsführer:
    Rehland 2 Fax: +49 (0) 4202 5117-70 HRB 121695 Dipl.-Ing. Bernhard Böden
    28832 Achim eMail: [email protected] Steuer Nr. 48-201-24705
    Internet: www.powerinnovation.com UST-ID DE 114 426 732

    You might also like