Revit MEP
Syllabus
1. MEP Essentials
o Linking Discipline Models
o Using the System Browser
o Using the Project Browser
o Creating and Modifying Levels
o Controlling Datum Visibility
o Using Scope Boxes
o Creating and Tagging Spaces
Placing Space
Separators
o Creating Color Schemes for Lighting Averages
o Creating Legends
o Creating HVAC Zones
o Setting and Showing the Active Work Plane
o Creating Reference Planes
o Modeling Accurately with Length and Angle
o Working with Object Snaps and Snap Increments
o Modify Ribbon Tools
o Using Visualization Aids When Working in 3D Views
o Tagging MEP Elements
o Coordinating Between Mechanical and Electrical Disciplines
o Interference Check
o Interference Check Documentation
o HVAC Airside
o Adding Mechanical Equipment
o Placing Air Terminals
o Placing Air Terminals on Ducts
o Creating Duct Systems
o Splitting Duct Systems
o Duct Settings
o Modeling Ductwork
o Placing Duct Placeholders
o Defining Duct Routing Preferences Generating Duct Layouts
o Sizing Ductwork
o Adding Duct Accessories
o Modifying Ductwork and Fittings
o Adding Duct Insulation
o Checking Duct Systems
o Analyzing Duct Systems and Pressure Loss Reports
o Understanding HVAC Airside Scheduling
o Understanding HVAC Airside Tags
3. General Piping
o Pipe Settings
o Modeling Piping
o Placing Pipe Placeholders
o Defining Pipe Routing Preferences
o Adding Pipe Accessories
o Modifying Piping and Fittings
o Adding Pipe Insulation
o Creating Parallel Pipes
o Modeling Sloped Pipe
4. HVAC Piping
o Creating Piping Systems
o Generating Pipe Layouts
o Sizing Pipe
o Analyzing Piping Systems
o Creating Pipe Pressure Loss Reports
o Understanding HVAC Piping Tags
o Plumbing
o Adding Plumbing Fixtures
o Using Copy and Monitor for Plumbing Fixtures o Placing Pipe Connectors
o Creating Plumbing Piping Systems o Splitting Piping Systems
o Creating Piping System Types
o Working with Piping Components
o Laying Out Plumbing Systems
o Creating Risers and Underfloor Views
o Understanding Plumbing Scheduling
o Understanding Plumbing Tags
5. Electrical
o Electrical Settings
o Specifying Demand Factors and Load Classifications
o Cable Tray and Conduit Settings
o Voltage Definitions
o Distribution Systems
o Assigning Secondary Systems
o Wire Types and Sizes
o Modeling Cable Trays Modeling Conduit
o Creating Parallel Conduits
o Adding Electrical Devices Annotation Symbols
o Applying Panel Schedule Template
o Mounting Heights Parameter
o Electrical Label Parameters
o Fire Alarm Devices
o Grounding Symbols
o Settings for Grounding Wire
o Power
o Reference Planes and Levels
o Placing Electrical Fixtures
o Creating and Naming Circuits
o Wiring Settings
o Wiring Circuits
o Checking Circuits
o Circuit and Pole Breakers
o Creating Power Circuits
o Creating Lighting Circuits
o Creating Switch Systems
o Annotation - Tagging
o Wire Placement
o Panel Naming
o Creating Panel Schedules
o Editing Panel Schedule Template Options
6.Lighting
o Lighting Fixtures and Photometric Data
o Placing Lighting Fixtures - Reference Planes
o Placing Unhosted Lighting Fixtures
o Emergency Lighting Fixtures
o Luminaire Schedules
o Mounting Parameters
o Using Copy and Monitor for Lighting Fixtures
o Adding Lighting Switches
o Creating a Switch System
o Powering Lighting Systems Analyzing Lighting Systems
o Rendering Views to Analyze Lighting
o Managing Lighting with Groups
o Understanding Lighting Scheduling
o Lighting Tags
o Cable Trays, Conduit and Busway
o Placing Cable Tray or Conduit
o Placing Conduit Underground
o Selecting Types
o Adding/Changing Fittings
o Routing Methods
o Changing Justifications
o Avoiding Obstacles
o Creating Service Type Filters
o Spot Elevations for Bottom of Cable Tray
o Annotation - Tagging
o Creating Parallel Conduit Runs
o Views and Sheets
o Plan Views
o Reflected Ceiling Plan Views
o Creating Section Views
o Segmenting Section Views
o Creating Callout Views
o Sketching a Callout View
o Creating Drafting Views
o Setting Up Detail Views
o Importing Details
o Creating a Reference View
o Duplicating Views
o Creating Match lines and View References
o Creating and Using Sheets
o Working with Viewports on Sheets
o Aligning Views on Sheets
o Using a Sheet List
o Creating Custom Title blocks
o Creating a Key Plan
o Creating Revision Clouds and Tags
o Managing Sheet Issues and Revisions
o Adding a Revision Schedule to a Title block
o Printing and Publishing
o Printing and Managing Print Settings
o Printing to PDF
o Publishing Files to Buzzsaw
o Managing Your Projects
o Managing Project Information
o Specifying a Project Location and Weather
o Understanding Coordinate Systems
o Relocating a Project
o Rotating True North and Project North
o Mirroring a Project
o Managing Project Browser View Organization
o Using Parameters and Filters for Browser Organization
o Managing Project Browser Sheet Organization
o Project Template Files
o Transferring Project Standards
o Deleting Unused Items from a Project
o Setting the Starting View
o Interoperability
o Importing and Managing Image Files
o Linking and Importing CAD Files
o Managing Linked CAD Files
o Controlling the Coordinates of Linked CAD Files
o Managing Imported CAD Files
o Controlling Line Weights in Imported CAD Files
o Working with Point Clouds
o Working with IFC
o Exporting to 2D CAD Formats
o Exporting to 3D CAD
o Exporting Views to Image Files
o Exporting to IFC
