Scribd Logo
Upload

Welcome to Scribd!

  • 99 views

    Precast Inspection Form (GFM)

    Uploaded by

    Kin Hamzah
    This document is an inspection checklist for pre-cast aluminium formwork. It contains 6 sections that describe key areas to check, including setting-out, vertical elements and components, slab elements and components, staircases, working platforms, and other items. For each item, the inspector indicates whether it meets specifications by checking "YES" or "NO" and providing remarks. The purpose is to ensure the pre-cast formwork is properly installed according to design and standards operating procedures before concrete is poured.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Precast Inspection Form (GFM)

    Uploaded by

    Kin Hamzah
    99 views2 pages
    This document is an inspection checklist for pre-cast aluminium formwork. It contains 6 sections that describe key areas to check, including setting-out, vertical elements and components, slab elements and components, staircases, working platforms, and other items. For each item, the inspector indicates whether it meets specifications by checking "YES" or "NO" and providing remarks. The purpose is to ensure the pre-cast formwork is properly installed according to design and standards operating procedures before concrete is poured.

    Original Title

    Precast Inspection Form(Gfm)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is an inspection checklist for pre-cast aluminium formwork. It contains 6 sections that describe key areas to check, including setting-out, vertical elements and components, slab elements and components, staircases, working platforms, and other items. For each item, the inspector indicates whether it meets specifications by checking "YES" or "NO" and providing remarks. The purpose is to ensure the pre-cast formwork is properly installed according to design and standards operating procedures before concrete is poured.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    99 views2 pages

    Precast Inspection Form (GFM)

    Uploaded by

    Kin Hamzah
    This document is an inspection checklist for pre-cast aluminium formwork. It contains 6 sections that describe key areas to check, including setting-out, vertical elements and components, slab elements and components, staircases, working platforms, and other items. For each item, the inspector indicates whether it meets specifications by checking "YES" or "NO" and providing remarks. The purpose is to ensure the pre-cast formwork is properly installed according to design and standards operating procedures before concrete is poured.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    REF NO.

    : /

    ALUMINIUM PRE-CAST INSPECTION/CHECKLIST

    DATE: TIME OF INSPECTION:


    MAIN CONTRACTOR: PROJECT CODE:
    SUB CONTRACTOR: BLOCK/LEVEL/ZONE/UNIT:
    NO. DESCRIPTION: YES NO REMARKS
    SETTING -OUT
    Are the props securely held in position?
    Is the propping installed as per design
    1 props on a solid base?
    Are the props plum and not damaged?

    Is the formwork/ deck complete?


    VERTICAL ELEMENT AND COMPONENT
    Verticality
    Formwork installation from offset line (300mm)

    Formwork surface (cleaned, coated with approved


    mould oil)
    Horizontal steel hollow bracing support(walls and
    columns, beams) for internal & external
    Steel ties and PVC sleeve installed correctly (wall
    and column, beam)
    2
    Pin and Wedge are installed accordingly (1pc every
    300mm)
    All wall and column rockers have been installed
    Timbers workers have been properly secured
    (composite formwork)
    Gaps between rockers and floor slab properly sealed
    by timber and cement mortar
    Has the required bracing been installed as SOP?
    (1200-1400mm gap from first layer 150mm-300mm)
    SLAB ELEMENT AND COMPONENT
    Proper level of soffit installation (level soffit checked)

    Formwork surface (cleaned, coated with approval


    mould oil)
    3
    Proper installation of kicker panel
    DROP installation follow drawing ( level &
    dimension)
    Pin and Wedges are installed properly
    NO. DESCRIPTION: YES NO REMARKS
    STAIRCASE
    Thread and Riser are properly secured (complete
    pin
    4 Props or support check for (Verticality, Stability,
    Tightening)
    Bracing wall to wall (horizontal bracing 600mm gap
    to each bracing)
    WORKING PLATFORM
    Fastening tie rod (wall and beam)
    Tie rod use the correct type (Not T-tie rod)

    5
    OTHERS
    All aluminium rubbish are clear away from casting
    zone
    6 Unused formwork and accessories (pin, wedge, tie,
    pvc sleeve, bolts, nuts ) to be collected form casting
    zone prior to concreting.
    transfer box location

    Comment:

    PREPARE BY:
    (GFM REPRESENTATIVE) (ACKNOWLEDGE BY
    )

    NAME: NAME:
    POSITION: POSITION:
    DATE: DATE:

    You might also like