Scribd
Upload
30 views

Filezilla Configuration

This document provides step-by-step instructions for setting up an FTP server on Windows using FileZilla to share files. It describes how to download and install FileZilla, designate a shared folder, configure user permissions, and secure the server by changing the listening port and implementing an IP filter. It also covers allowing the FTP port through Windows Firewall and mapping the shared folder on another computer.

Uploaded by

Electric Department
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Filezilla Configuration

This document provides step-by-step instructions for setting up an FTP server on Windows using FileZilla to share files. It describes how to download and install FileZilla, designate a shared folder, configure user permissions, and secure the server by changing the listening port and implementing an IP filter. It also covers allowing the FTP port through Windows Firewall and mapping the shared folder on another computer.

Uploaded by

Electric Department
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

How to Host an FTP Server on Windows with FileZilla

by Korbin Brown on March 13th, 2013

In this guide we’ll take you through the steps to setup a folder on your Windows computer as
an FTP repository, using a free program called FileZilla. FTP can be used to easily transfer a
lot of files between computers; the FTP repository can be mapped to multiple computers
across the Internet so that other people can access the directory right from Windows Explorer.

To start, you’ll need to download FileZilla server, available here.


After downloading the program, you can install it with all of the default settings. FileZilla will
install a service that runs whenever Windows boots up, so if you would rather only run the
FTP server manually, select the appropriate option from the drop down menu on the third
screen:

Apart from that setting, everything else can be left at the defaults for the purpose of this
tutorial. Once installation is complete, the FileZilla interface will open. Just click OK when this
window pops up right after installation:
Once the FTP server interface has loaded, we are ready to specify a directory as an FTP
repository. If the directory you want to use isn’t already created, minimize the interface and
create a folder where you want the FTP share to be. In this tutorial, we are going to use the
folder ‘FTP’ on our desktop. Its exact location will be “C:\Users\geek\Desktop\FTP”.
Click on Edit and then Users.

On the left side of the window that comes up, click on “Shared folders.”

Once there, click on “Add” underneath “Users.” Enter the username for an account that
another computer will be using to access the repository we’re setting up.

Click OK once you’re done entering the account name, and then click on “Add” underneath
the “Shared folders” section. Once you’ve done that, a window like the one below will pop up,
use it to select the directory you would like to share as an FTP repository.
Click OK. Now we need to assign the user permissions for this repository. By default, the user
we’ve created is able to read files, list directories, and list subdirectories. To give the user
further permissions, such as the ability to copy files to this repository, check the boxes
beneath ‘Files’ and ‘Directories.’

Click OK once you’re done setting the user permissions.


Securing Your FTP Server
Along with configuring the user(s) with a strong password, there are a few settings within
FileZilla that you can configure to further secure your new FTP server.
Hackers will constantly scan the internet for hosts listening on port 21, the default FTP port.
To avoid being detected by the thousands of hackers constantly scanning for people like you
with an FTP server, we can change the port that FileZilla listens on. Go to Edit and then
Settings. Under “General settings” you’ll see “Listen on these ports.” It should currently be on
21, but we recommend changing it to a random five digit number (nothing over 65535).

This doesn’t necessarily secure your server, but it obscures it and makes it harder to find.
Just remember that anyone determined to hack you will eventually find the port your FTP
server is listening on, so further measures must be taken.
As long as you know the IP’s (or at least the IP range) of the computers connecting to your
FTP server, you can set FileZilla to only respond to login requests from those IP addresses.
Under Edit > Settings, click on “IP Filter.”
In the first box, put an asterisk to block all IP’s from connecting to your server. In the second
box, add exceptions to this rule (IP’s or network ranges that should be allowed to connect).
For example, the following screenshot shows a configuration in which 10.1.1.120 and the
192.168.1.0/24 (in other words, 192.168.1.1 – 192.168.1.255) IP range would be able to
connect:
Along with secure passwords, that should be about all the security your FTP server will need.
There is a default Autoban setting already configured in FileZilla, so anyone who tries
connecting to your server too many times within a short period will be locked out for a while.
To tweak this setting, click on “Autoban” under Edit > Settings, but the default will suffice for
most people.
One last note on the security of this FTP server: transmissions are in clear-text, so don’t use
plain FTP to transfer anything confidential. SFTP or FTPS can be used for encrypting FTP
communications, but are beyond the scope of this guide and will be covered in future articles.
Windows Firewall Exception
If you have a third party firewall or anti-virus program, be sure that the port you’ve chosen to
run your FTP server on is allowed through it. If you have Windows Firewall enabled, you’ll
need to add an exception for the port. Go to your Start menu and type Windows Firewall, then
click on “Windows Firewall with Advanced Security.”

Click on “Inbound Rules” in the left column, and then “New Rule…” in the right column. We’ll
be allowing a port through the firewall, so select Port when the wizard asks “What type of rule
would you like to create” and then click next.
Type in the port you have chosen for your FTP server to run on (default is 21, but in this guide
we chose 54218).
Click next three times after entering your port number. Put in a name and description for this
exception so it’s easy to find in the future, and then click Finish.

Mapping the FTP Share on another Computer


Now that the FTP server is completely set up, we can have other people connect to it with the
user information we provide them (also make sure you have allowed their IP address). Others
could always use GUI applications such as FileZilla to connect to your FTP share, or they
could map it to their computer so it shows up in Explorer.
Open ‘Computer’ and right click in a blank area, then select “Add a network location.”

The “Add Network Location” wizard will appear, click next twice. Enter the IP address and port
of your FTP server, and click next.
Uncheck “Log on anonymously” and enter the username you have configured for your FTP
server. Click next twice and then click finish. It should ask you for your password, and then
you will be able to browse to the FTP share as if it were a local hard drive.

You might also like