Power Factor Correction

(Capacitor,Capacitor Contactor Controller,Reactor)

About Himel

Himel is a multinational manufacturer and provider of electrical products

successfully combining global expertise with local knowledge.

Founded by a Spanish entrepreneur in 1958, the company pioneered in

exporting quality electrical enclosures, establishing Himel brand globally.

Today, our global footprint and technology enable us to provide the best

combination of affordable and reliable offers for Low Voltage Power

distribution, Industry Automation and Home Electric to our long-term

customers and partners in over 50 countries where we are present.

Himel. Reliable made affordable

Reactive Power Management Reactive Power Management: Why?
In electrical networks, reactive energy results in increased line currents All AC electrical networks consume two types of
for a given active energy transmitted to loads. power: active power (kW) and reactive power (kvar):

The main consequences are: Use of these products in the electrical installation will result in:
● Need for oversizing of transmission and distribution networks by utilities, ● Improved continuity of service;
● Increased voltage drops and sags along the distribution lines, ● Reduced power losses;
● Additional power losses. ● Guarantee of scalability;
● efficient monitoring and management.
● The active power P (in kW) is the real power transmitted to loads such as motors, lamps, heaters, computers, etc. The electrical
This results in increased electricity bills for industrial customers because of:
active power is transformed into mechanical power, heat or light.
● Penalties applied by most utilities on reactive energy,
● The reactive power Q (in kvar) is used only to power the magnetic circuits of machines, motors and transformers.
● Increased overall kVA demand,
● Increased energy consumption within the installations.
The apparent power S (in kVA) is the vector combination of active and reactive power.
In an electrical circuit, the reactive energy is supplied in addition to the active energy.
Reactive energy management aims to optimize your electrical installation by reducing energy consumption, and to improve power
availability.

Power Factor Correction

Every electric machine needs active power (kW) and reactive power (kvar) to operate. The power rating of the installation in kVA is
the combination of both: (kVA)² = (kW)² + (kvar)².
The Power Factor has been defined as the ratio of active power (kW) to apparent power (kVA). Power Factor = (kW) / (kVA).
The objective of Reactive Energy management is improvement of Power Factor, or “Power Factor Correction”.
This is typically achieved by producing reactive energy close to the consuming loads, through connection of capacitor banks to the
network.
For these reasons, there is a great advantage in generating reactive energy at the load level in order to P
Quality and Reliability prevent the unnecessary circulation of current in the network. This is what is known as “power factor
S‘
● Advanced impregnation technology ensures the stability of parraffin fill-in: reliable lifecycle. correction”.This is obtained by the connection of capacitors, which produce reactive energy in opposition to
● 100% testing in manufacturing plant. the energy absorbed by loads such as motors. Qc
Q S
● Design and engineering with the highest international standards. The result is a reduced apparent power, and an improved power factor P/S’ as illustrated in the diagram
opposite.
Safety The power generation and transmission networks are partially relieved, reducing power losses and making
● Explosion-proof equipment, and quick disconnection from power grid; additional transmission capacity available.
● No risk of oil leakage due to the application of microcrystalline wax as impregnation.

Efficiency and Productivity

● Product development including innovation in ergonomics and ease of installation and connection.
● Specially designed components to save time on installation and maintenance.

A Comprehensive Offer
Power Factor Correction capacitor with and without reactor form part of a comprehensive offer of products perfectly coordinated to
meet low-voltage power distribution needs.
Low-voltage Capacitor Detuned Reactors - Harmonic Blocking
The efficiency of power generation, transmission or conversion is improved when operated at near unity power factor. The least
expensive way to achieve the same is by installing Capacitors. Capacitors must be able to withstand high voltage transients and
power line variations without breakdown.

Characteristic
• Low loss of medium and temperature with long serving time to save eleltricity bill.
• HIMEL Capacitors are made in accordance with Metallized Polypropelene technology with built-in SELF HEALING properties.
• Full specifications

HDCAP3 Series Influence of Harmonics

Capacity: 1~30kvar The growing use of power electronic devices is causing an increasing level of harmonic
Voltage: 230V, 400V, 450V, 525V distortion in the electrical systems, which frequently leads to problems with capacitor
Connection type: Three-phase installations. This is the reason why energy suppliers and actual conditions require the
Voltage: 230V, 400V, 450V, 525V usage of harmonic blocking reactors.
Connection type: Three-phase
A detuned capacitor system works out the function of power factor correction while
preventing any amplification of harmonic currents and voltages caused by resonance

HBSM Series between the capacitor and inductive impedances of the electrical system.

Capacity: 0.5~60kvar
Installation of a Detuned Harmonic Filters is recommended, which can restrain a low-
Voltage: 230V, 250V, 280V, 400V, 415V, 440V, 450V, 480V, 525V, 660V, 690V, 760V
pass resonant circuit (usually below the 5th) harmonics to flow into capacitors.
Connection type: Single-phase, three-phase, three-phase four-wire
Housing type: D, M and Q

Application
Capacitors get easily affected and damaged by harmonic current, inrush current, and due to over voltage in the reactive power
compensation system. Therefore, to avoid parallel resonance and the issue about amplified harmonic current, it is necessary to
be in series reactor along with the capacitors. Reactors are applied to avoid excessive amplification of power grid harmonics
and resonance resulting from the connection of capacitor banks to prolong the service time of capacitors.

Single-phase D Type Three-phase D Type Three-phase Four-wire D Type Features

Reactors adopt three-phase three-column type structure:
• The gap of the iron core adopts epoxy resin impreged glass cloth laminated sheet as the spacer.
High-impact binder is applied (high-temperature tolerance) to ensure that gaps of reactors do not change and there is no
noise during the operation.
• Coils are tightly wound with enameled flat wires to ensure that coils of reactors do not vibrate during the operation(foil
winding is used when current is more than 100A).
• Advanced low-loss silicon steel sheet is used. Fast punching mode is applied to ensure that products have high efficiency and
low loss.

Three-phase M Type Three-phase Four-wire Q Type Three-phase Four-wire M Type

POWER FACTOR CORRECTION

Power Factor Correction Solution

POWER
Standard: IEC60947-4-1, IEC60947-5-1 FACTOR
CORRECTION
Reactive Power Compensation Solution

0.4kV Busbar
End-user
load HDCAP3 Low-voltage Capacitor NE W HJKF Reactive Power Compensation Controller

Current transformer HLMK: NE W

Isolating switch: HDGL
Current sampling

HDCAP3 HJKF
Reactive power
compensation Rated Operating Voltage: AC 400V, 450V, 525V 01 Rated operating voltage: AC400V (±15%) 12
controller: Rated Capacity: 1~30kvar Rated current: ≤5A
HJKL Fuse: HRT Fuse: HRT Connection Type: Three-phase Output Loops: 12 loops
HJKF Rated Frequency: 50Hz Four running output modes: circulate switching, coding
Appearance: Cylinder switching, cut-on first and then cut-off, optimization
Inside Dipping Material: Polypropylene Metallized Film switching
Ambient Temperature: -25°C ~+50°C Frequency:50 / 60Hz

Capacitor switching
contactor: HDC19s HBSM Low-voltage Capacitor HKSG Three-phase Serial Reactor NE W

Serial reactor: HKSG HBSM HKSG

Rated Operating Voltage: AC 230V,250V,280V,400V,415V,
440V,450V,480V,525V, 660V,690V,750V Rated Operating Voltage: AC0.48kV, AC0.525kV 15
Rated Capacity: 0.5~60kvar Detuning: 7% and 14%
Connection Type: Single-phase,three-phase, Connection Type: Three-phase
three-phase four-wire Rated Frequency: 50Hz
Rated Frequency: 50/60Hz
Appearance: Box
Capacitor bank Capacitor: Capacitor: Inside Dipping Material: Polypropylene Metallized Film
HDCAP3 HBSM Ambient Temperature: -25°C ~+50°C 02 HDC19s Capacitor Switching Contactor

HJKL Reactive Power Compensation Controllers

System solution for reactive power compensation cabinet.

HDC19s

Rated Operating Voltage: 380/400V 19

HJKL Frame Current: 25A,32A,43A,63A,95A,115A,150A,170A
Poles: 3P
Sampling voltage: AC 380V/220V±15% 11 Rated Frequency: 50Hz, 50/60Hz
Sampling current: n/5A ( ls≤5A ) Coil Voltage: 24V, 36V, 48V, 110V, 127V, 220/230V, 240V,
Output loops: 4, 6, 8, 10, 12 loops 380/400V, 415V, 440V
Certificate: CE
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

HDCAP3 Low-voltage Capacitors HBSM Low-voltage Capacitors

Standard: IEC60831 Standard: IEC60831

Range Presentation Features Online Content Range Presentation Features Online Content

Power Factor Correction capacitors with and ◆ Low loss of medium and temperature with Power Factor Correction capacitors with and ◆ Low loss of medium and temperature with long serving
without reactor form part of a comprehensive offer long serving time to save electricity bill. without reactor form part of a comprehensive time to save electricity bill.
of products perfectly coordinated to meet low- ◆ Metallized Polypropylene technology with offer of products perfectly coordinated to ◆ Metallized Polypropylene technology with built-in SELF
voltage power distribution needs. built-in SELF HEALING properties. meet low-voltage power distribution needs. HEALING properties.
◆ Full specifications: ◆ Full specifications:
HDCAP3: Cylinder type ● HDCAP3 HDCAP3 HBSM: Box type ● HBSM: Capacity: 0.5~60kvar HBSM

Capacity: 1-30kvar Voltage: 230V, 250V, 280V, 400V, 415V, 440V,

Voltage: 400V, 450V, 525V 450V, 480V, 525V, 660V, 690V, 760V
Connection type: Three-phase Connection type: Single-phase, three-phase,
three-phase four-wire
Housing type: D, M and Q
Selection Code Single-Phase
HDCAP3 series Rated
With or without Compensation
Rated compensation Range Name Rated Voltage compensation Housing type
Range name Rated voltage Compensation method reactor method
capacity capacity

HDCAP3 400 5 3 HBSM 0 02500 0150 1 D

HBSM: Box type 0: Without reactor 02500: 250V 0020: 2kvar 1: Single-phase D: D type
HDCAP3: Cylinder type 0400: 400V 005: 5kvar 3: Three-phase compensation 0030: 3kvar compensation
0450: 450V 705: 7.5kvar 0040: 4kvar
0525: 525V 010: 10kvar 0050: 5kvar
025: 25kvar 0080: 8kvar
030: 30kvar 0100: 10kvar
0120: 12kvar
0150: 15kvar

Technical Parameters 0200: 20kvar M: M type

Low-voltage Capacitor HDCAP3
*For other voltages(230V, 280V, 400V, 415V, 450V, 480V, 525V), please consult local Himel office.
Rated Voltage(AC) 400V, 450V, 525V

Rated Capacity 1-30kvar Three-phase

Capacity deviation (μF) 0~+10% of the rated capacity Rated
With or without Compensation
Loss angle tangent (tan) At the rated power-frequency voltage, 20°C tan õ≤0.2% Range Name Rated Voltage compensation Housing type
reactor method
capacity
Connection Type Three-phase

Rated Frequency 50Hz HBSM 0 04500 0150 3 D

Ambient Temperature -25°C~+50°C
HBSM: Box type 0: Without reactor 04000: 400V 0005: 0.5kvar 3: Three-phase D: D type
AC withstand voltage Inter-electrode: 2.15Un/10s
04150: 415V … compensation
Between shell and phase: 3kV/10s 04500: 450V 0200: 20kvar
Allowable over-voltage (Un) 1.10 of rated voltage (not greater than 8h in 24h) 05250: 525V …

Allowable over-current (In) 1.43 of rated current 0320: 32kvar

Altitude ≤2000m 0300: 30kvar M: M type

0350: 35kvar
≤50% at 40°C
Relative humidity 0400: 40kvar
≤90% at 20°C

Appearance Cylinder 0400: 40kvar Q: Q type

0450: 45kvar
Inside Dipping Material Polypropylene metallized film
0500: 50kvar
The residual voltage reduces to 50V or below from √ 2Un after 3 minutes in case of
Self discharge characteristic 0600: 60kvar
power failure
Standard IEC60831
*For other voltages(230V, 250V, 440V, 480V, 690V, 750V), please consult local Himel office.

01 02
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

HBSM Low-voltage Capacitors selection guide

Standard: IEC60831 Standard: IEC60831

Three-phase four-wire HDCAP3 50/60Hz Selection Guide

Rated
With or without Compensation Commercial Ue 50Hz 60Hz
Range Name Rated Voltage compensation Housing type Description
reactor method Reference (V) kvar Ie (A) Contact kvar Ie (A) Contact
capacity

HBSM 0 02503 0150 4 D HDCAP304000053

HDCAP304007053
HDCAP3-400V-5kvar-3phase

HDCAP3-400V-7.5kvar-3phase
400

400
5

7.5
7.2

10.8
HDC19s-25

HDC19s-25
6

9
8.7

13
HDC19s-25

HDC19s-25

HBSM: Box type 0: Without reactor 02303: 230√3V 0030: 3kvar 4: Three-phase four- D: D type HDCAP304000103 HDCAP3-400V-10kvar-3phase 400 10 14.4 HDC19s-25 12 17.3 HDC19s-32
02503: 250√3V … wire compensation
0180: 18kvar 3YN HDCAP304000123 HDCAP3-400V-12kvar-3phase 400 12 17.3 HDC19s-32 14.4 20.8 HDC19s-32

HDCAP304000143 HDCAP3-400V-14kvar-3phase 400 14 20.2 HDC19s-32 16.8 24.2 HDC19s-43

0200: 20kvar M: M type HDCAP304000153 HDCAP3-400V-15kvar-3phase 400 15 21.7 HDC19s-43 18 26 HDC19s-43

0240: 24kvar
HDCAP304000163 HDCAP3-400V-16kvar-3phase 400 16 23.1 HDC19s-43 19.2 27.7 HDC19s-43

HDCAP304000183 HDCAP3-400V-18kvar-3phase 400 18 26 HDC19s-43 21.6 31.2 HDC19s-63

0250: 25kvar Q: Q type HDCAP304000203 HDCAP3-400V-20kvar-3phase 400 20 28.9 HDC19s-63 24 34.6 HDC19s-63
0300: 30kvar
0400: 40kvar HDCAP304000253 HDCAP3-400V-25kvar-3phase 400 25 36.1 HDC19s-63 30 43.3 HDC19s-95
0450:45kvar
HDCAP304000303 HDCAP3-400V-30kvar-3phase 400 30 43.3 HDC19s-95 36 52 HDC19s-95

HDCAP304500053 HDCAP3-450V-5kvar-3phase 450 5 6.4 HDC19s-25 6 7.7 HDC19s-25

HDCAP304507053 HDCAP3-450V-7.5kvar-3phase 450 7.5 9.6 HDC19s-25 9 11.5 HDC19s-25

*For other voltages(280√3V,400√3V),please consult local Himel office.
HDCAP304500103 HDCAP3-450V-10kvar-3phase 450 10 12.8 HDC19s-25 12 15.4 HDC19s-25

HDCAP304500123 HDCAP3-450V-12kvar-3phase 450 12 15.4 HDC19s-25 14.4 18.5 HDC19s-32

Technical Parameters HDCAP304500143 HDCAP3-450V-14kvar-3phase 450 14 18 HDC19s-32 16.8 21.6 HDC19s-43

Low-voltage Capacitor HBSM HDCAP304500153 HDCAP3-450V-15kvar-3phase 450 15 19.2 HDC19s-32 18 23.1 HDC19s-43
Single-phase 230V,250V,280V,400V,415V,450V,480V,525V
HDCAP304500163 HDCAP3-450V-16kvar-3phase 450 16 20.5 HDC19s-32 19.2 24.6 HDC19s-43
Rated Voltage(AC) Three-phase 230V,250V,400V,415V,440V,450V,480V,525V
HDCAP304500183 HDCAP3-450V-18kvar-3phase 450 18 23.1 HDC19s-43 21.6 27.7 HDC19s-43
Three-phase four-wire 400V(230√3V),450V(250√3V),480V(280√3V),690V(400√3V)

Rated Capacity 0.5-60kvar HDCAP304500203 HDCAP3-450V-20kvar-3phase 450 20 25.7 HDC19s-43 24 30.8 HDC19s-63

Capacity deviation (μF) 0~+10% of the rated capacity HDCAP304500253 HDCAP3-450V-25kvar-3phase 450 25 32.1 HDC19s-63 30 38.5 HDC19s-63

Loss angle tangent (tan) At the rated power-frequency voltage, 20°C tan õ≤0.2% HDCAP304500303 HDCAP3-450V-30kvar-3phase 450 30 38.5 HDC19s-63 36 46.2 HDC19s-95
Connection Type Single-phase, three-phase, three-phase four-wire
HDCAP305250053 HDCAP3-525V-5kvar-3phase 525 5 5.5 HDC19s-25 6 6.6 HDC19s-25
Rated Frequency 50/60Hz
HDCAP305257053 HDCAP3-525V-7.5kvar-3phase 525 7.5 8.2 HDC19s-25 9 9.9 HDC19s-25
Ambient Temperature -25°C ~+50°C

Inter-electrode: 2.15Un/10s HDCAP305250103 HDCAP3-525V-10kvar-3phase 525 10 11 HDC19s-25 12 13.2 HDC19s-25

AC withstand voltage
Between shell and phase: 3kV/10s HDCAP305250123 HDCAP3-525V-12kvar-3phase 525 12 13.2 HDC19s-25 14.4 15.8 HDC19s-25

Allowable over-voltage (Un) 1.10 of rated voltage (not greater than 8h in 24h) HDCAP305250143 HDCAP3-525V-14kvar-3phase 525 14 15.4 HDC19s-25 16.8 18.5 HDC19s-32
Allowable over-current (In) 1.43 of rated current
HDCAP305250153 HDCAP3-525V-15kvar-3phase 525 15 16.5 HDC19s-25 18 19.8 HDC19s-32
Altitude ≤2000m
HDCAP305250163 HDCAP3-525V-16kvar-3phase 525 16 17.6 HDC19s-32 19.2 21.1 HDC19s-32
≤50% at 40°C
Relative humidity
≤90% at 20°C HDCAP305250183 HDCAP3-525V-18kvar-3phase 525 18 19.8 HDC19s-32 21.6 23.8 HDC19s-43
Appearance Box
HDCAP305250203 HDCAP3-525V-20kvar-3phase 525 20 22 HDC19s-43 24 26.4 HDC19s-43
Inside Dipping Material Polypropylene metallized film
HDCAP305250253 HDCAP3-525V-25kvar-3phase 525 25 27.5 HDC19s-43 30 33 HDC19s-63
The residual voltage reduces to 50V or below from √ 2Un after 3 minutes in case of
Self discharge characteristic
power failure HDCAP305250303 HDCAP3-525V-30kvar-3phase 525 30 33 HDC19s-63 36 39.6 HDC19s-63
Standard IEC60831

03 04
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

selection guide selection guide

Standard: IEC60831 Standard: IEC60831

HBSM 50/60Hz Selection Guide Three-phase, 415V

Single-phase , 250V 50Hz 60Hz
Commercial Description
50Hz 60Hz Reference Three-phase △ 415V kvar Ie (A) Contact kvar Ie (A) Contact
Commercial Description
Reference Single-phase △ 250V kvar Ie (A) Contact kvar Ie (A) Contact HBSM00415000303D HBSM-0-415V-3kvar-3phase-D 3 4.2 HDC19s-25 3.6 5 HDC19s-25
HBSM00415000503D HBSM-0-415V-5kvar-3phase-D 5 7 HDC19s-25 6 8.4 HDC19s-25
HBSM00250000201D HBSM-0-250V-2kvar-1phase-D 2 8 HDC19s-25 2.4 9.6 HDC19s-25
HBSM00415000753D HBSM-0-415V-7.5kvar-3phase-D 7.5 10.4 HDC19s-25 9 12.5 HDC19s-25
HBSM00250000251D HBSM-0-250V-2.5kvar-1phase-D 2.5 10 HDC19s-25 3 12 HDC19s-25
HBSM00415000803D HBSM-0-415V-8kvar-3phase-D 8 11.1 HDC19s-25 9.6 13.3 HDC19s-25
HBSM00250000301D HBSM-0-250V-3kvar-1phase-D 3 12 HDC19s-25 3.6 14.4 HDC19s-25
HBSM00415001003D HBSM-0-415V-10kvar-3phase-D 10 13.9 HDC19s-25 12 16.7 HDC19s-32
HBSM00250000401D HBSM-0-250V-4kvar-1phase-D 4 16 HDC19s-25 4.8 19.2 HDC19s-32 HBSM00415001203D HBSM-0-415V-12kvar-3phase-D 12 16.7 HDC19s-32 14.4 20 HDC19s-32
HBSM00250000501D HBSM-0-250V-5kvar-1phase-D 5 20 HDC19s-32 6 24 HDC19s-43 HBSM00415001403D HBSM-0-415V-14kvar-3phase-D 14 19.5 HDC19s-32 16.8 23.4 HDC19s-43
HBSM00415001503D HBSM-0-415V-15kvar-3phase-D 15 20.9 HDC19s-32 18 25.1 HDC19s-43
HBSM00250000801D HBSM-0-250V-8kvar-1phase-D 8 32 HDC19s-43 9.6 38.4 HDC19s-63
HBSM00415001603D HBSM-0-415V-16kvar-3phase-D 16 22.3 HDC19s-43 19.2 26.8 HDC19s-43
HBSM00250001001D HBSM-0-250V-10kvar-1phase-D 10 40 HDC19s-63 12 48 HDC19s-95
HBSM00415002003D HBSM-0-415V-20kvar-3phase-D 20 27.8 HDC19s-43 24 33.4 HDC19s-63
HBSM00250001201D HBSM-0-250V-12kvar-1phase-D 12 48 HDC19s-95 14.4 57.6 HDC19s-95 HBSM00415002503D HBSM-0-415V-25kvar-3phase-D 25 34.8 HDC19s-63 30 41.7 HDC19s-63
HBSM00250001501D HBSM-0-250V-15kvar-1phase-D 15 60 HDC19s-95 18 72 HDC19s-115 HBSM00415003003D HBSM-0-415V-30kvar-3phase-D 30 41.7 HDC19s-63 36 50.1 HDC19s-95

HBSM00250002001M HBSM-0-250V-20kvar-1phase-M 20 80 HDC19s-150 24 96 HDC19s-150 HBSM00415003503M HBSM-0-415V-35kvar-3phase-M 35 48.7 HDC19s-95 42 58.4 HDC19s-95
HBSM00415004003M HBSM-0-415V-40kvar-3phase-M 40 55.6 HDC19s-95 48 66.8 HDC19s-115

Three-phase, 400V HBSM00415004503Q HBSM-0-415V-45kvar-3phase-Q 45 62.6 HDC19s-95 54 75.1 HDC19s-115

HBSM00415005003Q HBSM-0-415V-50kvar-3phase-Q 50 69.6 HDC19s-115 60 83.5 HDC19s-150
Commercial Description 50Hz 60Hz HBSM00415006003Q HBSM-0-415V-60kvar-3phase-Q 60 83.5 HDC19s-150 72 100.2 HDC19s-170
Reference Three-phase △ 400V kvar Ie (A) Contact kvar Ie (A) Contact
Three-phase, 450V
HBSM00400000103D HBSM-0-400V-1kvar-3phase-D 1 1.4 HDC19s-25 1.2 1.7 HDC19s-25

HBSM00400000203D HBSM-0-400V-2kvar-3phase-D 2 2.9 HDC19s-25 2.4 3.5 HDC19s-25 Commercial Description 50Hz 60Hz
Reference Three-phase △ 450V kvar Ie (A) Contact kvar Ie (A) Contact
HBSM00400000303D HBSM-0-400V-3kvar-3phase-D 3 4.3 HDC19s-25 3.6 5.2 HDC19s-25
HBSM00450000103D HBSM-0-450V-1kvar-3phase-D 1 1.3 HDC19s-25 1.2 1.6 HDC19s-25
HBSM00400000403D HBSM-0-400V-4kvar-3phase-D 4 5.8 HDC19s-25 4.8 7 HDC19s-25
HBSM00450000203D HBSM-0-450V-2kvar-3phase-D 2 2.6 HDC19s-25 2.4 3.1 HDC19s-25
HBSM00400000503D HBSM-0-400V-5kvar-3phase-D 5 7.2 HDC19s-25 6 8.7 HDC19s-25 HBSM00450000303D HBSM-0-450V-3kvar-3phase-D 3 3.8 HDC19s-25 3.6 4.6 HDC19s-25
HBSM00400000753D HBSM-0-400V-7.5kvar-3phase-D 7.5 10.8 HDC19s-25 9 13 HDC19s-25 HBSM00450000403D HBSM-0-450V-4kvar-3phase-D 4 5.1 HDC19s-25 4.8 6.1 HDC19s-25

HBSM00400000803D HBSM-0-400V-8kvar-3phase-D 8 11.5 HDC19s-25 9.6 13.8 HDC19s-25 HBSM00450000503D HBSM-0-450V-5kvar-3phase-D 5 6.4 HDC19s-25 6 7.7 HDC19s-25
HBSM00450000753D HBSM-0-450V-7.5kvar-3phase-D 7.5 9.6 HDC19s-25 9 11.5 HDC19s-25
HBSM00400001003D HBSM-0-400V-10kvar-3phase-D 10 14.4 HDC19s-25 12 17.3 HDC19s-32
HBSM00450000803D HBSM-0-450V-8kvar-3phase-D 8 10.3 HDC19s-25 9.6 12.4 HDC19s-25
HBSM00400001203D HBSM-0-400V-12kvar-3phase-D 12 17.3 HDC19s-32 14.4 20.8 HDC19s-32
HBSM00450001003D HBSM-0-450V-10kvar-3phase-D 10 12.8 HDC19s-25 12 15.4 HDC19s-25
HBSM00400001403D HBSM-0-400V-14kvar-3phase-D 14 20.2 HDC19s-32 16.8 24.2 HDC19s-43 HBSM00450001203D HBSM-0-450V-12kvar-3phase-D 12 15.4 HDC19s-25 14.4 18.5 HDC19s-32
HBSM00400001503D HBSM-0-400V-15kvar-3phase-D 15 21.7 HDC19s-43 18 26 HDC19s-43 HBSM00450001403D HBSM-0-450V-14kvar-3phase-D 14 18 HDC19s-32 16.8 21.6 HDC19s-43

HBSM00400001603D HBSM-0-400V-16kvar-3phase-D 16 23.1 HDC19s-43 19.2 27.7 HDC19s-43 HBSM00450001503D HBSM-0-450V-15kvar-3phase-D 15 19.2 HDC19s-32 18 23.1 HDC19s-43
HBSM00450001603D HBSM-0-450V-16kvar-3phase-D 16 20.5 HDC19s-32 19.2 24.6 HDC19s-43
HBSM00400001803D HBSM-0-400V-18kvar-3phase-D 18 26 HDC19s-43 21.6 31.2 HDC19s-63
HBSM00450001803D HBSM-0-450V-18kvar-3phase-D 18 23.1 HDC19s-43 21.6 27.7 HDC19s-43
HBSM00400002003D HBSM-0-400V-20kvar-3phase-D 20 28.9 HDC19s-63 24 34.6 HDC19s-63
HBSM00450002003D HBSM-0-450V-20kvar-3phase-D 20 25.7 HDC19s-43 24 30.8 HDC19s-63
HBSM00400002403D HBSM-0-400V-24kvar-3phase-D 24 34.6 HDC19s-63 28.8 41.5 HDC19s-63 HBSM00450002203D HBSM-0-450V-22kvar-3phase-D 22 28.2 HDC19s-43 26.4 33.8 HDC19s-63
HBSM00400002503D HBSM-0-400V-25kvar-3phase-D 25 36.1 HDC19s-63 30 43.3 HDC19s-95 HBSM00450002403D HBSM-0-450V-24kvar-3phase-D 24 30.8 HDC19s-63 28.8 37 HDC19s-63

HBSM00400002803D HBSM-0-400V-28kvar-3phase-D 28 40.4 HDC19s-63 33.6 48.5 HDC19s-95 HBSM00450002503D HBSM-0-450V-25kvar-3phase-D 25 32.1 HDC19s-63 30 38.5 HDC19s-63
HBSM00450002803D HBSM-0-450V-28kvar-3phase-D 28 35.9 HDC19s-63 33.6 43.1 HDC19s-95
HBSM00400003003D HBSM-0-400V-30kvar-3phase-D 30 43.3 HDC19s-95 36 52 HDC19s-95
HBSM00450003003D HBSM-0-450V-30kvar-3phase-D 30 38.5 HDC19s-63 36 46.2 HDC19s-95
HBSM00400003003M HBSM-0-400V-30kvar-3phase-M 30 43.3 HDC19s-95 36 52 HDC19s-95
HBSM00450003003M HBSM-0-450V-30kvar-3phase-M 30 38.5 HDC19s-63 36 46.2 HDC19s-95
HBSM00400003503M HBSM-0-400V-35kvar-3phase-M 35 50.5 HDC19s-95 42 60.6 HDC19s-95 HBSM00450003203D HBSM-0-450V-32kvar-3phase-D 32 41.1 HDC19s-63 38.4 49.3 HDC19s-95
HBSM00400004003M HBSM-0-400V-40kvar-3phase-M 40 57.7 HDC19s-95 48 69.3 HDC19s-115 HBSM00450003503M HBSM-0-450V-35kvar-3phase-M 35 44.9 HDC19s-95 42 53.9 HDC19s-95

HBSM00400004503Q HBSM-0-400V-45kvar-3phase-Q 45 65 HDC19s-115 54 78 HDC19s-150 HBSM00450004003M HBSM-0-450V-40kvar-3phase-M 40 51.3 HDC19s-95 48 61.6 HDC19s-95
HBSM00450004503Q HBSM-0-450V-45kvar-3phase-Q 45 57.7 HDC19s-95 54 69.3 HDC19s-115
HBSM00400005003Q HBSM-0-400V-50kvar-3phase-Q 50 72.2 HDC19s-115 60 86.6 HDC19s-150
HBSM00450005003Q HBSM-0-450V-50kvar-3phase-Q 50 64.2 HDC19s-115 60 77 HDC19s-150
HBSM00400006003Q HBSM-0-400V-60kvar-3phase-Q 60 86.6 HDC19s-150 72 103.9 HDC19s-170
HBSM00450006003Q HBSM-0-450V-60kvar-3phase-Q 60 77 HDC19s-150 72 92.4 HDC19s-150

05 06
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

selection guide Overall Dimension

Standard: IEC60831 Standard: IEC60831

HBSM 50/60Hz Selection Guide HDCAP3 Overall Dimension

Three-phase, 525V
Model Overall dimensions Mounting dimensions Capacitance
D*H(mm) (μF)
Commercial Description 50Hz 60Hz
HDCAP3-0.4-5-3 76*245 M12×16 99.47
Reference Three-phase △ 525V kvar Ie (A) Contact kvar Ie (A) Contact
HDCAP3-0.4-7.5-3 76*245 M12×16 149.21
HBSM00525000303D HBSM-0-525V-3kvar-3phase-D 3 3.3 HDC19s-25 3.6 4 HDC19s-25 HDCAP3-0.4-10-3 76*245 M12×16 198.95
HBSM00525000503D HBSM-0-525V-5kvar-3phase-D 5 5.5 HDC19s-25 6 6.6 HDC19s-25 HDCAP3-0.4-12-3 76*245 M12×16 238.74
HDCAP3-0.4-14-3 86*245 M12×16 278.53
HBSM00525001003D HBSM-0-525V-10kvar-3phase-D 10 11 HDC19s-25 12 13.2 HDC19s-25
HDCAP3-0.4-15-3 86*245 M12×16 298.42
HBSM00525001203D HBSM-0-525V-12kvar-3phase-D 12 13.2 HDC19s-25 14.4 15.8 HDC19s-25 HDCAP3-0.4-16-3 86*245 M12×16 318.31
HBSM00525001503D HBSM-0-525V-15kvar-3phase-D 15 16.5 HDC19s-25 18 19.8 HDC19s-32 HDCAP3-0.4-18-3 86*290 M12×16 358.11
HDCAP3-0.4-20-3 86*290 M12×16 397.9
HBSM00525001603D HBSM-0-525V-16kvar-3phase-D 16 17.6 HDC19s-32 19.2 21.1 HDC19s-32
HDCAP3-0.4-25-3 116*290 M16×25 497.37
HBSM00525001803D HBSM-0-525V-18kvar-3phase-D 18 19.8 HDC19s-32 21.6 23.8 HDC19s-43 HDCAP3-0.4-30-3 116*290 M16×25 596.85
HBSM00525002003D HBSM-0-525V-20kvar-3phase-D 20 22 HDC19s-43 24 26.4 HDC19s-43 HDCAP3-0.45-5-3 76*245 M12×16 78.6
HDCAP3-0.45-7.5-3 76*245 M12×16 117.9
HBSM00525002503D HBSM-0-525V-25kvar-3phase-D 25 27.5 HDC19s-43 30 33 HDC19s-63
HDCAP3-0.45-10-3 76*245 M12×16 157.19
HBSM00525003003M HBSM-0-525V-30kvar-3phase-M 30 33 HDC19s-63 36 39.6 HDC19s-63 HDCAP3-0.45-12-3 76*245 M12×16 188.63
HBSM00525003503M HBSM-0-525V-35kvar-3phase-M 35 38.5 HDC19s-63 42 46.2 HDC19s-95 HDCAP3-0.45-14-3 86*245 M12×16 220.07
HDCAP3-0.45-15-3 86*245 M12×16 235.79
HBSM00525004003M HBSM-0-525V-40kvar-3phase-M 40 44 HDC19s-95 48 52.8 HDC19s-95
HDCAP3-0.45-16-3 86*245 M12×16 251.51
HBSM00525004003Q HBSM-0-525V-40kvar-3phase-Q 40 44 HDC19s-95 48 52.8 HDC19s-95 HDCAP3-0.45-18-3 86*290 M12×16 282.95

HBSM00525005003Q HBSM-0-525V-50kvar-3phase-Q 50 55 HDC19s-95 60 66 HDC19s-115 HDCAP3-0.45-20-3 86*290 M12×16 314.39

HDCAP3-0.45-25-3 116*290 M16×25 392.99
HBSM00525006003Q HBSM-0-525V-60kvar-3phase-Q 60 66 HDC19s-115 72 79.2 HDC19s-150
HDCAP3-0.45-30-3 116*290 M16×25 471.58
HDCAP3-0.525-5-3 76*245 M12×16 57.74
HDCAP3-0.525-7.5-3 76*245 M12×16 86.62
HDCAP3-0.525-10-3 76*245 M12×16 115.49
HDCAP3-0.525-12-3 76*245 M12×16 138.59
HDCAP3-0.525-14-3 86*245 M12×16 161.69
Before breaking
HDCAP3-0.525-15-3 86*245 M12×16 173.23
HDCAP3-0.525-16-3 86*245 M12×16 184.78
HDCAP3-0.525-18-3 86*290 M12×16 207.88
HDCAP3-0.525-20-3 86*290 M12×16 230.98
HDCAP3-0.525-25-3 116*290 M16×25 288.72
HDCAP3-0.525-30-3 116*290 M16×25 346.47

Before breaking

35

35
H
H

After breaking
15 15 35

25
16

M12 M16
D D
After breaking

07 08
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

Overall Dimension Overall Dimension

Standard: IEC60831 Standard: IEC60831

HBSM Overall Dimension • Three-phase dimension（415V）

• Single-phase dimension（250V） Commercial Shell Capacitance Commercial Shell Capacitance
Reference Code (μF) Reference Code (μF)
Commercial Shell Capacitance Commercial Shell Capacitance
Reference Code (μF) Reference Code (μF) HBSM00415000303D D130 55.45 HBSM00415002003D D210 369.64

HBSM00250000201D D130 101.86 HBSM00250000801D D210 407.44 HBSM00415000503D D130 92.41 HBSM00415002503D D245 462.06

HBSM00250000251D D130 127.33 HBSM00250001001D D210 509.3 HBSM00415000753D D130 138.62 HBSM00415003003D D290 554.47
HBSM00250000301D D130 152.79 HBSM00250001201D D210 611.15 HBSM00415000803D D130 147.86 HBSM00415003503M M265 646.88
HBSM00250000401D D130 203.72 HBSM00250001501D D290 763.94 HBSM00415001003D D130 184.82 HBSM00415004003M M265 739.29
HBSM00250000501D D130 254.65 HBSM00250002001M M265 1018.59 HBSM00415001203D D185 221.79 HBSM00415004503Q Q210 831.7
HBSM00415001403D D185 258.75 HBSM00415005003Q Q210 924.11
• Three-phase dimension（400V）
HBSM00415001503D D185 277.23 HBSM00415006003Q Q210 1108.94
Commercial Shell Capacitance Commercial Shell Capacitance HBSM00415001603D D185 295.72
Reference Code (μF) Reference Code (μF)
HBSM00400000103D D130 19.89 HBSM00400001803D D210 358.1
HBSM00400000203D D130 39.79 HBSM00400002003D D210 398 HBSM
HBSM00400000303D D130 59.68 HBSM00400002403D D245 477.46
HBSM00400000403D D130 79.58 HBSM00400002503D D245 497.37
HBSM00400000503D D130 99.47 HBSM00400002803D D290 557.04
HBSM00400000753D D130 149.21 HBSM00400003003D D290 596.85
HBSM00400000803D D130 159.15 HBSM00400003003M M210 596.85
HBSM00400001003D D130 198.95 HBSM00400003503M M265 696.3
HBSM00400001203D D185 238.73 HBSM00400004003M M265 795.77
HBSM00400001403D D185 278.52 HBSM00400004503Q Q210 895.25
HBSM00400001503D D185 298.42 HBSM00400005003Q Q210 994.75
HBSM00400001603D D185 318.31 HBSM00400006003Q Q240 1193.7

• Three-phase dimension（415V）

Commercial Shell Capacitance Commercial Shell Capacitance

Reference Code (μF) Reference Code (μF)
HBSM00415000303D D130 55.45 HBSM00415002003D D210 369.64
HBSM00415000503D D130 92.41 HBSM00415002503D D245 462.06
HBSM00415000753D D130 138.62 HBSM00415003003D D290 554.47
HBSM00415000803D D130 147.86 HBSM00415003503M M265 646.88
HBSM00415001003D D130 184.82 HBSM00415004003M M265 739.29
HBSM00415001203D D185 221.79 HBSM00415004503Q Q210 831.7 D Type Unit: mm M Type Unit: mm
HBSM00415001403D D185 258.75 HBSM00415005003Q Q210 924.11 Housing code D130 D185 D210 D245 D290 Housing code M210 M265
HBSM00415001503D D185 277.23 HBSM00415006003Q Q210 1108.94 Capacitor body height (H) 130 185 210 245 290 Capacitor body height (H) 210 265
HBSM00415001603D D185 295.72

• Three-phase dimension（450V）

Commercial Shell Capacitance Commercial Shell Capacitance

Reference Code (μF) Reference Code (μF)
HBSM00450000103D D130 15.72 HBSM00450002803D D290 440.13
HBSM00450000203D D130 31.44 HBSM00450003003D D290 471.58
HBSM00450000303D D130 47.16 HBSM00450003003M M210 471.58
HBSM00450000403D D130 62.88 HBSM00450003203D D290 503.01
HBSM00450000503D D130 78.6 HBSM00450003503M M265 550.17
HBSM00450000753D D130 117.89 HBSM00450004003M M265 628.78
HBSM00450000803D D130 125.75 HBSM00450004503Q Q210 707.36
HBSM00450001003D D130 157.19 HBSM00450005003Q Q210 785.95 Q Type Unit: mm
Housing code Q210 Q240
HBSM00450001203D D185 188.63 HBSM00450006003Q Q240 943.14
HBSM00450001403D D185 220.07 Capacitor body height (H) 210 240

09 10
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

HJKL Power Factor Correction Controllers HJKF Power Factor Correction Controllers
Standard: IEC60831 Standard: IEC60051

Range Presentation Features Online Content Range Presentation Features

HJKL is Himel range of reactive power ◆ New control algorithm designed to reduce the HJKF is Hime range of the reactive power ◆ Elegant LCD display with rich contents
compensation controllers, matching all kinds of number of switching operations and quickly attain compensation controller. It is a special controller ◆ Wiring identification by manual assistance is included for
capacitors in low-voltage system. It adopts MCU the targeted power factor. used for three-phase low-voltage power grid. easy wiring
controlling to compute the phase difference ◆ Quick and simple mounting and wiring. Automatic generation of multiple alarm events, ◆ Current dotted terminal identification is included for easy
between the fundamentals of current and voltage, ◆ Direct viewing of installation electrical information which can remind users through nodes or sounds. wiring switch
HJKL
enabling precise power factor measurement with and capacitor condition. Temperature adjustment function is involved in all ◆ Output code can be arbitrary coding, and it can be
quick response. ◆ Direct reading and easy setup models, which can save 1 pcs temperature-control compatible with various capacity configurations
◆ Alarm indication. regulator in capacitor cabinet. Harmonics detecting ◆ Four running output modes: circulate switching, coding
and protection functions are included as well. All switching, cut-on first and then cut-off, optimization switching
parameters are protected by password to avoid any ◆ Temperature control node included is easy to adjust ambient
unexpected modifications. temperature of the reactive power compensation cabinet
Selection Code ◆ Alarm node included is easy for users to temperature control,
remote monitoring and fault protection
Range name Sampling voltage Output loops Circuit type Enclosure material ◆ Built-in buzzer alarm function, and alarm events can be
optional which will be convenient for users on-site to find

HJKL 2CM 4 DC S ◆
abnormal cases
RS485 port is for communication type model which can be
arbitrary wiring without differentiating A and B. It’s easy for
HJKL 2CM: 220V 4: 4 loops Default: AC circuit S: Molded case
users to do wiring with master computers.
5CQ: 380V 6: 6 loops DC: DC 12V
8: 8 loops
10: 10 loops Selection Code
12: 12 loops

Range Name Sampling Voltage Output Loops Function

HJKF5C V 12 Z
Technical Parameters
Power Factor Correction Controllers HJKL HJKF5C V: 400V 12: 12 loops Default: wiithout communication
Category Parameter value Default Value Z: Communication type

Sampling voltage 380V(HJKL5C)/ 220V(HJKL2C)±15%

Sampling current n/5A ( ls≤5A )
Frequency 50-60(Hz)
Sensitivity 50mA
Input threshold lag 0.80-lead-0.82 adjustable step 0.01 0.95
Cut-off threshold lead-0.80-lag0.82 adjustable step 0.01 -0.99 Technical Parameters

Loop setting 1-12 adjustable step 1 Rated operating voltage AC400V (±15%)

Time setting 1s~120s adjustable step 1s 30s Frequency 50 / 60Hz

400~450V(HJKL5C)adjustable step 5V 430V Rated current ≤5A

Overvoltage setting
235~260V(HJKL2C)adjustable step 5V 245V Sensitivity ≤50mA
Undervoltage protection 300V(HJKL5C) / 170V(HJKL2C) Compensation method Common three-phase compensation
Undercurrent setting 0mA~500mA adjustable step 50mA 200mA (0 is for close) Power loss <5VA
COSΦ display Lead & Lag (0.00~0.99) resolution 0.01 Response time 1s~120s
Working methods Continuous working, circular switching Output capacity 220V/5A
Output loops 4, 6, 8, 10, 12 loops Output loop number 12 loops
Capacity of output Each group 5A, 220V resistive / 3A, 380V resistive Hole size 113*113(mm)
IP grade IP30 for cover
Weight <0.6kg

11 12
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

Wiring Diagram Dimensions

Standard: IEC60831 Standard: IEC60051
负 JKL5C
载
Ub、Uc电压信号输入端
V 1 2 3 4 5 6 7 8 9 10 Ia、In电流信号输入端
FU 交流接触器
[8A] J1 J10 V控制输出端子公共端
Wiring Diagram P Dimensions
如接触器为380V:P点接B或C
HJKL5C J11J12 HJKL5C
如接触器为220V:P点接N相
HJKL5C
电容柜
HJKL5C-DC
Ua Ub Uc Un Ia Ib Ic In 11 12
140 100 111
Ub, Uc: input of voltage signal Ub, Uc: input of voltage signal

Ia, In: input of current signal Ia, In: input of current signal

V: common terminal of control output V, K(1-12): output of DC control signal

e.g. Contactor 380V: point P is connected to phase B or phase C; V: 0V

e.g. Contactor 220V: point P is connected to phase N K(1-12): output -12V

负 JKL2C
load
JKL5C load
载 JKL5C-DC

140
负 负 Ua、Un电压信号输入端
载 载
Ub、Uc电压信号输入端 V 1 2 3 4 5 6 7 8 9 10 Ub、Uc电压信号输入端
Ia、In电流信号输入端
V 1 2 3 4 5 6 7 8 9 10 Ia、In电流信号输入端 FU V J11 2 3交流接触器
4 5 6 7 8 9J10 10
[8A] Ia、In电流信号输入端
V控制输出端子公共端
FU AC contactor
交流接触器 composition switch
复合开关/无触点开关
[8A] J1 J10 V控制输出端子公共端 0V K1 K10P
-12V V,K(1-12)直流控制信号输
如接触器为380V:P点接B或C
P
如接触器为380V:P点接B或C J11J12 出端子，V输出0V，K(1-12)
如接触器为220V:P点接N相
J11J12 K11K12 输出-12V
如接触器为220V:P点接N相
电容柜 Ua Ub Uc Un Ia Ib Ic In 11 12
电容柜 Ua Ub Uc Un Ia Ib Ic In 11 12 电容柜 Ua Ub Uc Un Ia Ib Ic In 11 12

HJKL2C HJKL2C
HJKL2C HJKL2C-DC

Ub, Uc: input of voltage signal Ub, Uc: input of voltage signal
140 100 111
Ia, In: input of current signal Ia, In: input of current signal

V: common terminal of control output V, K(1-12): output of DC control signal

e.g. Contactor 380V: point P is connected to phase B or phase C; 负 JKL5C-DC V: 0V

载
e.g. Contactor 220V: point P is connected to phase N Ub、Uc电压信号输入端
K(1-12): output -12V

V 1 2 3 4 5 6 7 8 9 10 Ia、In电流信号输入端
0V K1
复合开关/无触点开关 load
JKL2C
K10负 V,K(1-12)直流控制信号输
load
负 JKL2C-DC
-12V 载 载

140
Ua、Un电压信号输入端 Ua、Un电压信号输入端
出端子，V输出0V，K(1-12)
V 1 2 3 4 5 6 7 8 9 10 输出-12V Ia、In电流信号输入端 V 1 2 3 4 5 6 7 8 9 10 Ia、In电流信号输入端
FU AC contactor
交流接触器 K11K12 composition switch
复合开关/无触点开关
[8A] J1 J10 V控制输出端子公共端 0V K1 K10 V,K(1-12)直流控制信号输
-12V
电容柜 Ua Ub Uc Un Ia Ib Ic In 11 12 P
如接触器为380V:P点接B或C 出端子，V输出0V，K(1-12)
J11J12 K11K12 输出-12V
如接触器为220V:P点接N相
电容柜 Ua Ub Uc Un Ia Ib Ic In 11 12 电容柜 Ua Ub Uc Un Ia Ib Ic In 11 12

HJKF5C HJKF5C

负 JKL2C-DC
载
Ua、Un电压信号输入端
V 1 2 3 4 5 6 7 8 9 10 Ia、In电流信号输入端
复合开关/无触点开关
0V K1 K10 V,K(1-12)直流控制信号输
-12V
出端子，V输出0V，K(1-12)
K11K12 输出-12V

13 电容柜 Ua Ub Uc Un Ia Ib Ic In 11 12 14
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

HKSG Detuned Reactors HKSG Detuned Reactors

Standard: IEC60289 Standard: IEC60289

Range Presentation Features Online Content Dimension

Capacitors get easily affected and damaged by Reactors adopt three-phase three-column Product Parameter Aluminum Copper
harmonic current, inrush current, and due to over type structure: Installation Hole Installation Hole
Dimension Product Dimension Product
voltage in the reactive power compensation system. ◆ High-impact binder is applied (high- No. Reactor Capacitor dimension dimension dimension dimension
Reactor Model capacity capacity (mm) outline (mm) outline
(mm) (mm) (mm) (mm)
Therefore, to avoid parallel resonance and the issue temperature tolerance) and no noise (kvar) (kvar)
L*W*H A*B a*b L*W*H A*B a*b
about amplified harmonic current, reactors need to during the operation
HKSG 1 HKSG-0.35/0.48-7% 0.35 5 160*115*170 130*75 17*φ7 160*115*170 130*75 17*φ7
be added in series along with the capacitors. Reactors ◆ Coils are tightly wound with enameled D
are applied to avoid excessive amplification of power flat wires to ensure that coils of reactors 2 HKSG-0.7/0.48-7% 0.7 10 160*120*170 130*82 17*φ7 200*110*195 170*72 17*φ7 D
grid harmonics and resonance resulting from the do not vibrate during the operation(foil 3 HKSG-0.84/0.48-7% 0.84 12 200*145*185 170*72 17*φ7 200*115*195 170*77 17*φ7
connection of capacitor banks to prolong the service winding is used when current is more 4 HKSG-1.05/0.48-7% 1.05 15 200*150*185 170*77 17*φ7 200*155*185 170*82 17*φ7
time of capacitors. than 100A).
5 HKSG-1.4/0.48-7% 1.4 20 200*165*185 170*87 17*φ7 200*165*185 170*92 17*φ7
◆ High efficiency and low loss
6 HKSG-1.75/0.48-7% 1.75 25 200*170*185 200*95 17*φ7 240*180*210 200*95 22*φ10

7 HKSG-2.1/0.48-7% 2.1 30 240*180*210 200*95 22*φ10 240*185*230 200*100 22*φ10

Y
8 HKSG-2.45/0.48-7% 2.45 35 240*190*235 200*100 22*φ10 250*190*235 200*105 22*φ10 Y

Selection Code 9 HKSG-2.8/0.48-7% 2.8 40 240*190*235 200*100 22*φ10 250*195*235 200*110 22*φ10

10 HKSG-3.15/0.48-7% 3.15 45 250*195*235 210*105 22*φ10 250*205*235 210*120 22*φ10

Rated Capacity of Rated Voltage of the
Model Winding Material Reactance Ratio 11 HKSG-3.5/0.48-7% 3.5 50 250*200*235 210*110 22*φ10 250*205*255 210*120 22*φ10
the Reactor Capacitor
12 HKSG-4.2/0.48-7% 4.2 60 250*210*255 210*120 22*φ10 310*200*255 250*110 22*φ10

HKSG L 1P0 G048 H7

13 HKSG-0.7/0.525-14% 0.7 5 200*110*190 170*72 17*φ7 200*110*190 170*72 17*φ7
D
Default: Copper windings P6: 0.6kvar G048: 480V H7: 7% 14 HKSG-1.4/0.525-14% 1.4 10 200*125*190 170*87 17*φ7 200*125*190 170*87 17*φ7 D
L: Aluminum windings P7: 0.7kvar G052: 525V H14: 14%" 15 HKSG-1.68/0.525-14% 1.68 12 240*175*210 200*90 22*φ10 240*170*210 200*90 22*φ10
1P0: 1kvar
16 HKSG-2.1/0.525-14% 2.1 15 240*185*210 200*100 22*φ10 240*180*230 200*100 22*φ11
…
9P8: 9.8kvar 17 HKSG-2.8/0.525-14% 2.8 20 240*185*230 200*100 22*φ10 240*190*230 200*110 22*φ10

18 HKSG-3.5/0.525-14% 3.5 25 250*200*235 210*110 22*φ10 250*200*235 210*115 22*φ10

19 HKSG-4.2/0.525-14% 4.2 30 250*200*255 210*110 22*φ10 250*205*255 210*120 22*φ10

Y
20 HKSG-4.9/0.525-14% 4.9 35 250*210*255 210*120 22*φ10 310*205*285 210*120 22*φ10 Y

21 HKSG-5.6/0.525-14% 5.6 40 310*200*285 250*110 22*φ10 310*205*285 250*120 22*φ10

Technical Parameters 22 HKSG-6.39/0.525-14% 6.3 45 310*200*285 250*110 22*φ10 310*215*285 250*130 22*φ10

Basic Information HKSG Series 23 HKSG-7.0/0.525-14% 7 50 310*215*285 250*120 22*φ10 310*225*285 250*140 22*φ10

Rated Operating Voltage(AC) AC0.48kV, AC0.525kV (others can be customized) 24 HKSG-8.4/0.525-14% 8.4 60 310*225*285 250*130 22*φ10 310*235*285 250*150 22*φ10

Reactance Ratio 7% and 14% (others can be customized)

L W L W
Phase Three-phase

Rated Frequency 50Hz

Withstand voltage grade 3000V / min

Overload ability ≤1.35 times

H
H
Coil temperature rise≤85K
Temperature rise limitation
Winding temperature rise≤95K

Reactor noise ＜ 50dB

A B A B
Insulation class ＞F
A Appearance D A Appearance Y
IP grade IP00

b
b

Altitude ≤ 2000m a a

B
B
Ambient temperature -25°C~+50°C

Standard IEC 60289

15 16
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

HKSG Detuned Reactors HKSG Detuned Reactors

Standard: IEC60289 Standard: IEC60289

Product Connection Method Guideline for Model Selection

With modern electronic technology and developed applications, the number of harmonics generating devices is gradually growing
with high harmonic content. All other types of equipment, except the resistance heating devices and filament lamps, generate
harmonics with different levels of harmonic content.

Harmonic Generating Devices:

K1 The devices, which can generate harmonics include:

CK ◆ Magnetic-core equipment (transformer, motor, reactor, electric welder, and inductive heating machine)

C ◆ Electric-control transmission equipment (variable frequency speed control, thyristor-type voltage regulation control, elevator or
hoister)
◆ Electronic rectifier, inverter, electric arc furnace, furnace of calcium carbide, switching mode power supply, UPS, electronic office
Form connection
equipment (computers and printers),
◆ medical electronic equipment
Note:
◆ household appliances and many more.
the standard type of connection is △ type connection (as shown in the figure above).
◆ Converters, frequency conversion equipment, rolling mills, electric arc furnaces, and electric locomotive and satured transformers
Other connection methods have to make separate comments when ordering.
with high ratings are the main sources of harmonics.

Sources Generating 3rd Harmonics:

The main sources for generating 3rd harmonics include:

Operating Environment and Working Conditions ◆ Electric arc furnace

◆ Electric locomotive
Ensure the followings:
◆ Distribution system of shopping mall, business building, and residential building
◆ No harmful gas, inflammable and explosive materials are around.
Sources Generating 5th Harmonics:
◆ Surrounding is well ventilated. For example: if it is installed in the cabinet, ventilation facilities should be added.
The main sources for generating 5th harmonics include:
◆ There is no pollution, corrosive, and explosive medium in the atmosphere, which can seriously affects the insulation of reactors.
◆ No serious vibration and turbulence at the installation sites. ◆ Electric locomotive
◆ The place is free from direct contact of rain and snow. ◆ Distribution system of shopping mall, business building, and residential building
◆ Converter and frequency conversion equipment with high ratings

Sources Generating 7th Harmonics:

The main sources for generating 7th harmonics are converters and frequency conversion equipment with high ratings.

Where does our Reactor Fit :

Our reactors are mainly used to filter 3rd and 5th harmonics. Normally, reactance ratio is selected from the below list:

◆ 3rd harmonics is the main content: 14%

◆ 5th harmonics is the main content: 7%

Note: If a customer has requirements for other reactance ratio, we can also customize it.

17 18
POWER FACTOR CORRECTION POWER FACTOR CORRECTION

HDC19s Capacitor Switching Contactors HDC19s Capacitor Switching Contactors

Standard: IEC60947-4-1, IEC60947-5-1 Standard:HDC19s
HDC19s
HDC19s HDC19sCapacitor
Capacitor
Capacitor HDC19s
HDC19s
Capacitor
IEC60947-4-1, Capacitor
Switching
Switching Switching
Capacitor
IEC60947-5-1 Switching
Contactor
Contactor
Switching
Contactor
Switching Contactor
Contactor
Contactor HDC19sHDC19s
HDC19s HDC19sCapacito
HDC19s
Capacitor
Capacitor Switch
HDC19s
Capacit
Switch
Standard:
Standard: IEC 60947-4-1 IEC
IEC 60947-4-1
Standard:
60947-5-1 IEC 60947-5-1
IEC 60947-4-1 IEC 60947-5-1 Standard:
Standard: IEC 60947-4-1 IEC
IEC 60947-4-1
Standard:
60947-5-1 IEC 60947
IEC 6
Standard: IEC 60947-4-1
Standard:
IEC 60947-5-1
IEC 60947-4-1
Standard:IEC
IEC60947-5-1
60947-4-1 IEC 60947-5-1 Standard: IEC 60947-4-1
Standard:
IEC 60947-5-1
IEC 60947-4-1
Standard:IEC
IEC606

Range Presentation Features Online Content Dimension

Overall
Overall andOverall
and and installation
Overall
installation
installation
Overall and
Overall and
and Dimention
Dimention
Dimention installation
installation DimentionDimention
installation Dimention Working Working
Working Conditions
Conditions
WorkingConditions
Working
Working C
ConditionsC
AmbientooC
Ambient temperature:-5 ～+40ooCAmbient
temperature:-5 o
C～
, the dailyote
Ambient temperature:-5
Ambient C～+40 CAmbient
temperature:-5
, the daily C
te
HDC19s is Himel range of contactors dedicated ◆ Current range covers from 25A to 170A HDC19s-25,32,43
HDC19s-25, 32, 43 HDC19s-25, 32, 43 HDC19s-25, 32, 43 Altitude: ≤ 2000Altitude:
m ≤ 2000 mAltitude: ≤
HDC19s-25, 32, 43 HDC19s-25, 32, 43HDC19s-25, 32, 43 Altitude: ≤ 2000 mAltitude: ≤ 2000 Altitude:
m ≤
for switching of capacitors. It is developed ◆ Various auxiliary contact types can be selected for The atmosphericThe atmospheric
relative
The atmospheric relative
humidity
The atmospheric
relative
The
humidityThe
does
does
atmos
hum
not
relative
atmos
not
have ahumidity
have a relative higher relative higher
havehumid
under a rela
lower
based on 3 series contactor with technology different applications have a relative higher
havehumidity
a relative
temperature,
temperature, preventive
under
higher
havelower
preventive
measures
a hum
temperatu
shall be
rela
mea t
temperature, preventive
temperature,
measurespreventive
temperatu
shall be m t
to reduce capacitor closing current impact on ◆ Manufactured on automated production line for Pollution Level: Pollution
3 Level: 3 Pollution L
Pollution Level: 3 Pollution Level: Pollution
3 L
contactor contacts. better reliability.
HDC19s

Motor

Motor Control and Protection

Motor
MotorControl

Motor Control and Protection

MotorControl
A max

F max
D max
InstallationInstallation
Installation Conditions
Conditions Conditions
Installation
Installation
Installation
Conditio
Selection Code

Controland

Controland
Installation Type: III
Installation Type:Installation Type: IIIInstallation
IIIInstallation Type: III
Installation
Range name Frame current Auxiliary contact Coil voltage Frequency Installation
Installation position:
Installation position:
shouldposition:
Installation
Installation
be installed
should beposition:
should
installed
Installation
should
b
in the
in the

andProtection

andProtection
HDC19s 25 11 M 5

Protection

Protection
B max C max E max

HDC19s: Capacitor Switching 25: 25A HDC19s-25~43A: F: 110V 5: 50Hz

HDC19s-63, 95, 115HDC19s-63, 95, 115 HDC19s-63, 95, 115
HDC19s-63, 95, 115 HDC19s-63, 95, 115HDC19s-63, 95, 115
Contactor 32: 32A 11: 1NO+1NC S: 127V 7: 50/60Hz HDC19s-63,95,115
43: 43A 20: 2NO+0NC M: 220/230V o
02: 0NO+2NC
360
360o 360
36
63: 63A U: 240V
95: 95A Q: 380/400V
HDC19s-63~115A:
115: 115A L: 415V
12: 1NO+2NC
*150: 150A X: 440V
21: 2NO+1NC
*170: 170A

A max
D max

F max
HDC19s-150~170A:
32: 3NO+2NC

Note:"*" pruducts are not yet on the market, please consult local Himel office if necessary.

Technical Parameters C max E max

B max
Capacitor Switching Contactors HDC19s-25 HDC19s-32 HDC19s-43 HDC19s-63 HDC19s-95 HDC19s-115 HDC19s-150 HDC19s-170
Standard IEC60947-4-1, IEC60947-5-1
HDC19s-150,170 Overall size Overall size Overall size Installing dimensionInstalling dimension
Installing dimension
Certificate CE Model Model Model Overall size Overall size Overall size Installing dimensionInstalling dimension
Installing dimension
Model Model
Amax Model
AmaxBmax Amax
Bmax
Cmax Bmax
Cmax
Dmax Cmax
DmaxEmax Dmax
EmaxFmax Emax
Fmax Fmax
Main circuit Amax Amax
Bmax Amax
Bmax
Cmax Bmax
Cmax
Dmax Cmax
Dmax
Emax Dmax Emax
Fmax EmaxFmax Fmax
HDC19s-25 HDC19s-25
176 HDC19s-25
17645.5 176
45.5122 45.5
12274.5 122
74.535 74.5
3550/60 50/60
35 50/60
HDC19s-25 HDC19s-25
176 HDC19s-25
176
45.5 17645.5
122 45.5122
74.5 12274.5
35 74.550/60
35 3550/60 50/60
Rated operating voltage (Ue) V 380/400 HDC19s-32 HDC19s-32
180 HDC19s-32
18056.5 180
56.5132 56.5
13283 132
83 40 83
4050/60 50/60
40 50/60
HDC19s-32 HDC19s-32
180 HDC19s-32
180
56.5 18056.5
132 56.5132
83 132 83
40 8350/60
40 4050/60 50/60
Rated insulation voltage (Ui) V 690

D max
HDC19s-43 HDC19s-43
180 HDC19s-43
18056.5 180
56.5132 56.5
13283 132
83 40 83
4050/60 50/60
40 50/60

F max
AAmax
HDC19s-43 HDC19s-43
180 HDC19s-43
180
56.5 18056.5
132 56.5132
83 132 83
40 8350/60
40 4050/60 50/60
Rated current of HDC19s-63 HDC19s-63
190 HDC19s-63
19074.5 190
74.5154 74.5
154
127.5 127.5
154 59 127.5
59
100/110 100/110
59 100/110

A
AC-6b 380V A 17 23 29 43 63 87 115 130 HDC19s-63 HDC19s-63
190 HDC19s-63
190
74.5 19074.5
154 74.5127.5
154 154127.5
59 127.5
100/110
59 59
100/110 100/110
controlled capacitor HDC19s-95 HDC19s-95
190 HDC19s-95
19085.5 190
85.5160 85.5
160
127.5 127.5
160 67 127.5
67
100/110 100/110
67 100/110
HDC19s-95 HDC19s-95
190 HDC19s-95
190
85.5 19085.5
160 85.5127.5
160 160127.5
67 127.5
100/110
67 67
100/110 100/110
Rated capacity of AC-6b 220V 6 10 15 18 30 35 46 52 HDC19s-115 HDC19s-115
190 HDC19s-115
19085.5 190
85.5160 85.5
160
127.5 127.5
160 67 127.5
67
100/110 100/110
67 100/110
Rated operating HDC19s-115 HDC19s-115
190 HDC19s-115
190
85.5 19085.5
160 85.5127.5
160 160127.5
67 127.5
100/110
67 67
100/110 100/110
controlled capacitor
voltage of capacitor AC-6b 380V 12 20 25 30 50 60 80 90
(Qn: kvar)
03 03 03
03 B BmaxB03 B 03 C max E max
Rated conventional thermal current A 25 32 43 63 95 125 200 200
Controlling capability of inrush current A ≤35ln ≤55ln ≤60ln
Mechanical endurance 10000 times 100 Overall and Installation Dimensions
Electrical endurance AC-6b 380V 10000 times 15 12
Operating frequency AC-6b 380V Times/h 300 120 104.5Overall size Installation dimension
Model
Coil A max B max C max D max E max F max
Coil voltage (Us) V 24,36,48,110,127,220/230,240,380/400,415,440 HDC19s-25 176 45.5 122 74.5 35 50/60
Coil frequency Hz AC 50Hz & 50/60Hz HDC19s-32 180 56.5 132 83 40 50/60
Operating voltage V 85%-110%Us HDC19s-43 180 56.5 132 83 40 50/60
Drop-out voltage V 20%-75%Us HDC19s-63 190 74.5 154 127.5 59 100/110
Auxiliary Contact HDC19s-95 190 85.5 160 127.5 67 100/110
Auxiliary contact combination 11,20,02 12,21 32 HDC19s-115 190 85.5 160 127.5 67 100/110
Rated conventional thermal current (Ith) A 10 HDC19s-150 188.5 120.5 196 170 104.5 136.5/151.5

Note: Parameters above are considered under three-phase system; for single-phase capacitor, please consult us. HDC19s-170 188.5 120.5 196 170 104.5 136.5/151.5

19 20
 POWER FACTOR CORRECTION
Notes
HDC19s Capacitor Switching Contactor
HDC19s Capacitor Switching Contactors
Standard: IEC 60947-4-1 IEC 60947-5-1
Standard: IEC60947-4-1, IEC60947-5-1

Working
WorkingConditions
Conditions
Ambient temperature:-5oC ～+40oC , and the daily average temperature: ≤ 35oC
Altitude: ≤ 2000 m
The atmospheric relative humidity does not exceed 50% when the highest ambient temperature is +40°C. It is allowed to
have a relative higher humidity under lower temperature, e.g. up to 90% at +20°C. For occasional dew due to the temperature
change, preventive measures shall be taken.
Pollution Level: 3

Motor Control and Protection

Installation
InstallationConditions
Conditions
Installation Type: III
Installation position: should be installed in the absence of a significant shock and vibration point

360o 5o 5o

21 22
04
Himel
www.himel.com

Oct 2021