Brochure J-Series.

fh11 5/9/07 2:38 PM Page 1

C M Y CM MY CY CMY K

315SJ Backhoe Loader Features and Options

G Standard Equipment L Optional Equipment

315SJ Engine
G
G

G
G
G
G
G
Certified to EPA Tier 2 emissions
John Deere Model 4045T - 4.5litre, 92 net peak hp
(69 kW) turbocharged, isolation mounted
Vertical spin-on engine oil filter
Vertical spin-on fuel filter with water seperator
1 micron Ultra Fine Diesel Filter
Oil-to-water engine oil cooler
Antifreeze, -30˚C
Loader
G
G
G
G
G
L
L
L
G
Loader bucket anti-spill (rollback)
Return-to-dig feature
Single-lever control with electric clutch cut-off switch
Bucket-level indicator
Loader boom service lock
Ride control
Auxiliary loader hydraulics with two-lever control
Front loader hydraulic coupler for buckets, forks, etc.
High-visibilty loader arms
Operator’s Station - continued
G
L
G

G
G

G
Key start switch with electric fuel shutoff
Electronic anti-theft enabled through monitor
Engine coolant temperature guage, illuminated
electronic, with audible warning
Oil temperature guage, illuminated electronic, with
audible warning
Fuel guage, illuminated electronic
Digital display of engine hours, engine rpm, and system
voltage
Monitor system with audible and visual warnings:
J-series 315SJ
BACKHOE LOADER

G Coolant recovery tank Hydraulic System Engine air restriction indicator / Low alternator voltage
G Serpentine belt with automatic belt tensioner G 136L/min tandem gear pump, open-centre system indicator / Engine oil pressure indicator with audible
G Suction-type cooling fan G Independent hydraulic reservoir warning / Hydraulic filter restriction indicator / Parking
G Enclosed safety fan guard G “O”-ring face seal connectors brake on/off indicator with audible warning / Seat belt
L High ambient temperature engine cooling G 6-micron vertical spin-on filter indicator / Low brake pressure / Machine diagnostic
G Dual-element dry-type air cleaner information via 4-pushbutton/LCD operator interface
G Muffler, under hood with curved-end exhaust stack Electrical System G Mechanical suspension deluxe fabric swivel seat with
G 12-volt system lumbar adjustment and armrests (fully adjustable)
Powertrain G 70-amp alternator L Air suspension deluxe fabric swivel seat with lumbar
G Powershift transmission: Torque converter with L 90-amp alternator adjustment
electrically actuated twist grip F-N-R with neutral safety G Single battery with 190-min reserve capacity G Seat belt, 2-in, with retractor
switch interlock (1st through 4th gears) and 950 CCA L Seat belt, 3-in, with retractor
G Transmission oil cooler G Positive terminal battery cover G Cab: Headliner, dome light, left and right cab doors,
G Vertical spin-on transmission filter G Blade-type multi-fused circuits tinted safety glass, windshield wiper (one rear and
L Transmission remote oil-sampling port G By-pass start safety cover on starter one front), front windshield washer, fresh-air intake,
G Differential lock, electric foot-actuated L Battery disconnect switch heater/defroster/pressuriser (40,000-Btu/hr. [11.7kW]
G Planetary final drives G Jump/auxiliary start terminal heater), and 12-volt outlets (2)
G Power assisted hydraulic service brakes (conform to L Air conditioner (26,000-Btu/hr. [7.6kW] output and
ISO 3450): Inboard, wet multi-disc, self-adjusting and Lights CFC-free R134a refrigerant)
self equalising L Additional halogen work lights (6), 32 500 candlepower
G Parking/emergency brake with electric switch control each (2 front, 2 rear, and 2 side docking) Overall Vehicle
(conforms to ISO 3450): Spring applied, hydraulically G Turn signal/flashing (2 front and 2 rear) G One-piece unitised construction mainframe
released wet multi-disc / Independent of service brakes G Rear stop and tail (2) G Vehicle tie-downs (2 front and 2 rear)
G Hydrostatic power steering with emergency manual G Rear reflectors (2) G Remote grease bank for front axle
mode G 454kg front counterweight
L Non-powered front axle Operator’s Station L 657kg front counterweight
G Mechanical-front-wheel-drive with traction control G Modular-design ROPS/FOPS canopy with molded L Rubber grille bumpers
limited-slip differential: Electric on/off control / Driveshaft roof (conforms to SAE J1040): Isolation mounted G Fuel tank, 155L, ground-level fueling
guard / Sealed axle G Left and right access G Two-position easy tilt hood
G Slip-resistant steps and ergonomically located G Extended grille frame
Backhoe handholds (conform to SAE J185) G Removable toolbox with padlock hasp
G Standard dipperstick, 4,29m digging depth G Molded floor mats G Vandal protection for locking, engine hood, toolbox,
L Extendable dipperstick, 1,07m extension G Headliner hydraulic reservoir, and fuel tank
L Heavy-duty backhoe bucket cylinder option G Coat hook G Reverse warning alarm
G Two-lever backhoe controls G 12-volt outlets - 2 in cab L Sound reduction package
L Two-lever pilot controls with pattern-selection feature G Built-in beverage and Thermos bottle holders G Dent-resistant full-coverage rear fenders
G Backhoe transport lock lever G Built-in Operator and Manual storage compartment L Front mudguards
G Swing lock pin stored in operator’s station with manual
G Stabilisers with two-direction anti-drift valves G Interior rearview mirror
G Heavy-duty backhoe bucket with lift loops G 2 outside rearview mirrors
L Backhoe coupler for C, D, E and G series John Deere G Rotary hand throttle
buckets, Case Buckets, and Cat buckets G Suspended foot throttle
L Auxiliary backhoe valve for swingers, thumbs, etc. with L Tilt steering
auxiliary plumbing G Horn
L Auxiliary backhoe valve for hammers, compactors with
auxiliary plumbing

Bloemfontein..................................................................................................051 432 7855

Cape Town .....................................................................................................021 386 2252 BELL SOUTHERN AFRICAN CUSTOMER SERVICE CENTRES
Durban ..........................................................................................................031 569 1100
East London ...................................................................................................043 748 6622 Port Shepstone ...............................................................................................039 685 4124
Empangeni ....................................................................................................035 792 6517 Rustenburg.....................................................................................................014 538 1003
George...........................................................................................................044 878 0930 Springbok ......................................................................................................027 712 1124
Jet Park .........................................................................................................011 928 9838 Swaziland......................................................................................................0926 887 497
Kimberley.......................................................................................................053 841 0713 Tzaneen.........................................................................................................015 307 4812
Kuruman........................................................................................................053 733 0698 Umhlali .........................................................................................................032 947 0696
Middelburg ....................................................................................................0132 46 1169 Vryheid..........................................................................................................034 981 5541
Mozambique ..............................................................................................+25 817 22031 Wolmaransstad ..............................................................................................018 596 2319
Namibia/Windhoek...................................................................................+26 461 226021 Zambia - Kitwe .......................................................................................+26 027 31557/8
Nelspruit........................................................................................................013 755 2110 Zambia - Lusaka.........................................................................................+26 012 72251
Pietermaritzburg.............................................................................................033 386 9319 Zimbabwe - Harare.....................................................................................+26 346 60687
Piet Retief ......................................................................................................017 826 1523 Zimbabwe - Gweru......................................................................................+26 354 22385
Pongola .........................................................................................................034 413 1720 ZImbabwe Triangle........................................................................................+26 333 6552
Port Elizabeth.................................................................................................041 451 3202

BELL SOUTH AFRICA : Tel: +27 (0)11-928 9700 • Fax: +27 (0)11-928 9702
BELL INTERNATIONAL : Tel: +27 (0)35-907 9431 • Fax: +27 (0)35-797 4336
B R O C H / 4 9 9 / 0 5 / 0 7 - J - s e r i e s 3 15 S J B r o c h u r e

E-mail: [email protected] • www.bellequipment.com

All dimensions are shown in millimetres, unless otherwise stated between brackets. Under our policy

of continuous improvement, we reserve the right to change specifications and design without prior

notice. Photographs featured in this brochure may include optional equipment.

Composite
Brochure J-Series.fh11 5/9/07 2:38 PM Page 2
C M Y CM MY CY CMY K

Enhanced cooling package employs

Smart choice oil-to-water hydraulic and transmission

coolers. Fewer stacked cores allow
faster cold-weather warm-up, less
plugging, and simplified cleanout.

Whether you use it as a “shovel” or your main machine, the J-series Backhoe Loader will help you 500-hour engine and 2 000-hour
hydraulic oil service intervals enable
get it done. No doubt, you’ll benefit from proven Bell advantages such as attachment J-series Backhoes to work longer
interchange-ability, ground-level daily servicing, industry-low maintenance costs, between changes.
smooth and responsive hydraulics,
limited slip front axle, and Fuel-efficient tier 2 PowerTech™
engine with wet-sleeve liners provides
unsurpassed resale value. Convenient lube and periodic Full tilt bonnet means best- Engine hood is constructed uniform engine cooling and longer
Enhancements such as an maintenance chart ensures in-class ground-level access. of a resilient composite durability than cast-in-block designs.
that nothing gets overlooked. Vertical spin-on engine, material that resists impact
advanced multi-function
Synthetic bushings in the transmission and hydraulic and damage. Standard grille Best-in-class same-side ground-level
diagnostic monitor, durable loader linkage and filters and quick-release fuel extensions further protect access coupled with lowest
solid-state electronics and an extendable dipperstick filters allow quick, no-spill the front end. maintenance costs means you’ll
improved cooling system, eliminate numerous grease changes. discover what owners already know -
nipples. it costs less to run a Bell.
make the J-series even
simpler to run and Solid-state electrical system eliminates
cheaper to keep. numerous relays and connectors for
No more stacked hydraulic enhanced reliability.
and transmission coolers in
front of the radiator. With Wide-mouth fuel tank allows fast,
improved airflow, fan speed ground-level fill-ups. Generous
capacity lets you work longer before
has been reduced for less
refuelling.
debris build-up and noise,
Clean-out is easier too.
Large pins and replaceable bushings
deliver long-term durability and keep
the backhoe and loader tightly secured
and digging true.

Totally welded mainframe resists

torsional stress, absorbs shock loads,
and delivers maximum strength.
Simplifies service access to major
components too.

Simply Powertrain components are isolated

from shock-load stress and individually
removable to help speed repairs and
downtime.

Standard limited-slip
mechanical-front-wheel drive
delivers 80 percent of
available power to the wheel
more Sealed front axle and larger kingpins
and differentials help ensure drivetrain
durability.

with the best traction.

Engage it “on-the-fly”, for
true all-wheel drive when and
where you need it.
productive Unlike axles that rely on internal
augers to direct oil to critical
components, Bell’s design provides
full-time, full-axle lubrication on any
angle in any terrain.

Curved-knee loader-boom Backhoe boom, dipperstick, Whether you’re loading trucks, busting up tar, picking pipe, digging Planetary final drives distribute loads
design enhances visibility stabilisers and loader are over three gears and are sealed in a
deep, or moving materials, the J-series Backhoe is more than up to it. cooling oil bath for long life and trouble-
and provides superior reach, box-constructed of low-alloy
easily dumping to the centre steel for maximum strength. Powerful and quick high-pressure hydraulics deliver generous breakout and lift free service.

of the truck. For fuller loads, capacity at both ends, along with impressive backhoe crowd power and swing
Your Bell Service Centre has the parts
faster. torque. Excavator-style hydraulics smoothly blend functions, so your operators won’t and service you need to stay
have to work hard to be more productive. The standard PowerShift™ transmission productive, and offers a wide variety
is also easy to operate, offering smooth, on-the-go clutchless shifting. Delivers faster of preventative maintenance and
support programmes to help control
acceleration, higher transport speed, and better hill-climbing capability too. No other costs.
backhoe offers a similar combination of power, speed and ability.

Optional extendable dipperstick Optional pallet forks Optional Worksite Pro™ Optional ride-control Optional multi-purpose
adds digging depth, reach, and increase machine quick-coupler lets you option smoothes moves bucket offers even more
ability. Outer-box design grasps versatility. The low-profile change attachments over rough terrain, so full versatility for your jobsite.
objects such as concrete slabs loader knee is narrower quickly and easily without loads are more likely to Wear-resistant alloy-steel
between the bucket and gripper through the line of sight, leaving your seat. arrive at their destination cutting edges on working
teeth while extending or for a better view of the Accommodates a wide - instead of somewhere areas ensure long life and
retracting. For easier loading into attachment. Visibility to variety of attachments. in-between. Reduces trouble-free operation.
trucks. the forks at truck-bed operator fatigue too.
height is best in class.

2 3

Composite
Brochure J-Series.fh11 5/9/07 2:38 PM Page 3
C M Y CM MY CY CMY K

No shortage of storage in here. There

Comfortably ahead are cup holders, a place for a cell

phone, and extra room for other carry-
ons. 12 volt power ports on both sides
of the console provide convenient
power for cell phones and other

of the competition
devices.

Advanced monitor provides vital and general State-of-the-art multi-function monitor

with easy-to-read messaging, large
operating information including hours, engine
analog gauges, and LED warning
speed and gear selection. Industry-exclusive lights give vital operating info at a
Who wouldn’t be more productive in the spacious, well-equipped cab of a J-series Backhoe? onboard diagnostics of most sensors and glance.
Its expansive, curved windshield provides a virtually unobstructed panoramic view of the work at hand and surrounding switches for quick troubleshooting. Available
jobsite. An automatic high-velocity climate-control system and fully adjustable suspension seat ensure year-round machine security system prevents unauthorised Optional highly efficient HVAC system
comfort. The state-of-the-art multi-function monitor with easy-to-read messaging, machine movement. with automotive-style directional vents
helps keep the view clear and the cab
large analog gauges and LED warning lights give vital operating info at a comfortable.
glance. Add to these amenities such as 12-volt power ports and
generous storage space for cups and other carry-ons, it’s Optional tilt steering wheel is infinitely
easy to see why your operators will be more comfortably adjustable. Angles up and out of the
way for swiveling the seat or passing
productive. through the cab.

Built with state-of-the-art tools and

techniques by a quality-conscious
workforce at our world-class With large convenient handholds,
facility in Richards Bay, the self-cleaning skid resistant steps,
and wide entryways, getting to work
J-series Backhoe delivers
has never been easier. Seperate
unsurpassed reliability service and automatic park brake
and uptime. Everything systems provide an extra measure of
about these backhoes - security.
from their exceptionally
durable
one-piece, totally
welded mainframe
to their
Cruise control - why not
box-constructed
in your Backhoe?
loaders, booms Industry exclusive
and dippersticks rotary throttle lets
- is designed for you dial-in the
maximum uptime. speed you need.
When you know Engaging the
brakes
how they’re built, automatically drops
you’ll run a Bell. engine speed to idle.

Tilt the hood

and discover
the many
advantages that
make the J-series
Backhoe the
simplest, least
expensive to
maintain. Standard PowerShift™
Same-side transmission allows no-clutch
on-the-go shifting on all
ground-level access to
machines.
checkpoints makes quick work of
the daily routine. Service intervals
have been extended so you can work
longer between changes. And because no
maintenance beats low maintenance, self-
adjusting serpentine belts, park brake, and
wet-disk brakes seldom, if ever, require attention. The
standard ultrafine diesel filter also ensures peace of mind and
Split floor mats and a large
maximum system protection. With the Bell J-series, you’ll spend less
removable panels provide
time and expense when servicing on site - and more time getting work done. convenient, top-side access to
internal components.

4 5

Composite
Brochure J-Series.fh11 5/9/07 2:38 PM Page 4
C M Y CM MY CY CMY K

315SJ Backhoe Loader Specifications

ENGINE CYLINDERS OVERALL DIMENSIONS LOADER DIMENSIONS/PERFORMANCE
Manufacture and Model John Deere PowerTech™4045T turbocharged, Type Heat-treated, chrome-plated, polished rods; A Ground Clearance 351 mm
standard hardened-steel (replaceable bushings) pivot pins (minimum) P Bucket Dump Angle 45 deg.
Non-Road Emission Standards Certified to EPA Tier 2 emissions Bore Rod Stroke B Overall Length (transport) 5.26 m (maximum)
Displacement 4.5 L Diameter C Stabiliser Spread 2.4 m Q Rollback Angle at Ground 40 deg.
Net Peak Power (ISO9249) 69 kW (92 hp) @ 2,000 rpm Loader Boom, (2) 80 mm 50 mm 790 mm D Height to Top of ROPS/Cab 2.79 m Level
Net Peak Torque (ISO9249) 384 Nm (282 lb.ft) @ 1,400 rpm Loader Bucket(1) 90 mm 50 mm 744 mm E Length from Axle to Axle
Net Torque Rise 46% Backhoe Boom (1) 120 mm 56 mm 795 mm Non-Powered Front axle 2.11 m Heavy-Duty Multipurpose
Lubrication Pressure system with spin-on filter and cooler Backhoe Crowd (1) 115 mm 63 mm 622 mm Mechanical-Front-Wheel- 2.14 m Bucket Capacity 1.00m3 1.00m3
Air Cleaner Dual-stage dry type with safety element and Backhoe Bucket (1) 90 mm 56 mm 810 mm Drive Axle Width 2337 mm 2337 mm
evacuator valve Heavy-Duty Option (1) 100 mm 63 mm 810 mm Weight 552 kg 747 kg
Backhoe Swing (2) 90 mm 50 mm 278 mm BACKHOE DIMENSIONS/PERFORMANCE Breakout Force 45.8 kN 42.9 kN
COOLING Backhoe Extendable Backhoe specifications are with 610 mm x 0.21 m3 (24 in x7.5 cu.ft) bucket Lift Capacity (full height) 3269 kg 2996 kg
Fan Type Suction Dipperstick (1) 70 mm 40 mm 1067 mm R Height to Bucket Hinge Pin 3.40 m 3.40 m
Engine Coolant Rating -30˚C Backhoe Stabiliser Standard (2) 70 mm 45 mm 716 mm Bucket Range 305-915 mm (maximum)
Engine Oil Cooler Oil to water Non-Powered Axle (1) 70 mm 42 mm 213 mm Digging Force S Dump Clearance 2.64 m 2.62 m
Mechanical-Front-Wheel Drive (1) 67 mm 42 mm 210 mm Bucket Cylinder 53.3 kN (bucket at 45 deg.)
POWERTRAIN With Heavy-Duty Cylinder Option 67.8 kN T Reach at Full Height 765 mm 818 mm
Transmission 4-speed, helical-cut gears, full powershifted with Crowd Cylinder 36.0 kN (bucket at 45 deg.)
ELECTRICAL
hydraulic reverser standard; electric clutch cutoff Swing Arc 180 deg. U Digging Depth Below 206 mm 185 mm
Voltage 12 volt
on gearshift and loader levers Operator Control Two levers Ground (bucket level)
Alternator Rating 70 amp
Torque Converter Single stage, dual phase with 2.631:1 stall ratio; With Standard With Optional V Length From Front Axle 2.03 m 2.15 m
280 mm Dipperstick Extendable Dipperstick Centreline to Bucket
OPERATOR STATION
Maximum Travel Speeds Type (SAEJ1040) Canopy, isolation mounted, ROPS/FOPS, left/right Backhoe Retracted Extended Cutting Edge
(with 16.9-28 rear tyres) Forward Reverse access, with molded roof. F Loading Height 3.56 m 3.58 m 4.34 m
Gear 1 6.1 km/h 7.6 km/h Cab: Headliner, dome light, left and right cab (truck loading position) LIFT CAPACITY WITH
Gear 2 11.1 km/h 14.0 km/h doors, tinted safety glass, windshield wiper (one G Reach from Centre of 5.56 m 5.61 m 6.63 m QUICK-COUPLER/FORKS
Gear 3 22.8 km/h 22.5 km/h rear ane one front), front windshield washer, Swing Pivot A1 Maximum Height 2073 kg
Gear 4 38.4 km/h N/A fresh-air intake, heater/defroster/pressuriser H Reach from Centre of 6.91 m 7.01 m 8.03 m B1 Maximum Reach 3162 kg
(40,000Btu/hr. [11.7 kW] heater), and 12-volt Rear Axle C1 At Ground Line 4145 kg
Axle
outlets (2) I Digging Depth 4.29 m 4.42 m 5.49 m D1 Below Ground Line 211 mm
Axle Oscillations,
(SAE maximum)
Stop to Stop (both axles) 22 deg.
OVERALL VEHICLE J Digging Depth (SAE) Lift capacities are over-end values in kg according to SAE J31. Figures listed
Axle Ratings Mechanical- Non-powered 2 ft (610 mm) Flat Bottom 4.24 m 4.40 m 5.44 m are 87% of the maximum lift force available. Base vehicle includes
front-wheel drive front axle (opt) Rear Mainframe Unitised one-piece construction
8 ft (2440 mm) Flat Bottom 4.03 m 4.09 m 5.22 m counterweight.
Static 12 000 kg 18 000 kg 13 000 kg K Overall Width 2.31 m 2.31 m 2.31 m
Dynamic 6 000 kg 7 200 kg 7 000 kg TYRES
Front Rear (less loader bucket)
Ultimate 28 200 kg 32 950 kg 30 600 kg L Side-Shift from Tractor 582 mm 582 mm 582 mm
Non-Powered Front Axle 11L-16 SL F-3 (12) 16.9-28 R-4 (10)
Differentials Automatic, traction-control limited slip Mechanical-Front-Wheel Drive 12.5/80-18 I-3 (10) 16.9-28 R-4 (10) Centreline
(mechanical-front-wheel-drive)/electric, foot- M Wall-to-Swing Centreline 580 mm 580 mm 580 mm
actuated, 100% hydraulically locking (rear) SERVICEABILITY N Bucket Rotation 190 deg. 190 deg. 190 deg.
Steering (ISO5010) Hydrostatic power and emergency steering Hydraulic Oil Filter, Spin-On O Transport Height 3.51 m 3.48 m 3.48 m
Axle Type Mechanical- Non-powered Enclosed Replaceable Element,
front-wheel drive front axle (optional) Vertically Mounted 6-micron filtration / 1,000 service hours
Curb-Turning Radius Refill Capacities
With Brakes 3.58 m 3.44 m Cooling System 21 L
Without Brakes 4.08 m 3.94 m Rear Axle 18 L
Bucket Clearance Circle Engine Oil (including vertical
With Brakes 10.11 m 9.89 m spin-on filter) 13 L
Without Brakes 11.05 m 10.76 m Torque Converter and
Steering Wheel Turns Transmission 16 L
(lock to lock) 2.7 3.3 Fuel Tank (with ground-level
fueling) 155 L
Final Drives Heavy-duty, outboard planetary final drives
Hydraulic System 91 L
distribute shock loads over 4 gears
Hydraulic Reservoir 39 L
Brakes (SAE J1473) Mechanical-Front-Wheel-Drive
Service Power assisted, hydraulic wet disc, mounted Housing
inboard, self-adjusting and self-equalising Axle 6.6 L
Parking Spring-applied, hydraulically released, wet, multi Planetary (each) 1L
disc, independent of service brakes with electric 315SJ Backhoe with 315SJ Backhoe with 315SJ Backhoe with
Standard Dipperstick 1.07 m Extendable Dipperstick, Retracted 1.07 m Extendable Dipperstick, Extended
switch control OPERATING WEIGHTS
With Full Fuel Tank, 79 kg 5 5 5
16 16
HYDRAULICS Operator, and Standard
16

Main Pump Open center, gear type, tandem with unloader Equipment 2533 1699 12
4
1989 1415 12
4
1213 991 12
4

2259
Pump Flow @ 2,200 rpm • 2WD 7 600 kg 2569 1659 3 1415
8
3 1335
1431
997
992 8
3
2624) 1604 8 2303 1383
Backhoe 136 L/min • 4WD 7 890 kg 2998 DIPPER
1545 2 2591
DIPPER
1342 2 1530 979 2
DIPPER
Loader 106 L/min 5166
LIFT
WITH
BOOM
1486 4
1
3780 LIFT
WITH
BOOM
1298 4
1
1991
1674 LIFT
WITH
965
949
4
1
AT 65° 1431 1257 BOOM
System Relief Pressure OPTIONS 1381 0 0
AT 65°
1217 0 0
AT 65°
931 0 0
SWING PIVOT SWING PIVOT SWING PIVOT
Backhoe 24 993 kPa Extendable Dipperstick 222 kg 1336
1
1182
1
918
1
BOOM 1295 4 BOOM 1150 4 BOOM 906 4
Loader 24 993 kPa Front Loader Coupler 286 kg LIFT
1261
LIFT
1127
LIFT
896
2 2 2
Backhoe Controls Two-lever manual standard; manual and/or electric Backhoe Bucket Coupler 63 kg 1235 8 1117 8 894 8
3 3 3
auxiliary functions optional 1239
12 1500
1140
12 933
902
12
Loader Controls Single-lever control with electric clutch cut-off 4 4 4

switch standard; manual auxiliary function optional FEET 0 4 8 12 16 20 FEET 0 4 8 12 16 20 FEET 0 4 8 12 16 20

METERS 0 1 2 3 4 5 6 7 METERS 0 1 2 3 4 5 6 7 METERS 0 1 2 3 4 5 6 7

6 7

Composite