Catálogo Mangueras PARKER

Visual Index
Hose
HOSE
Hydraulic
Suction and Return
Push-Lok
Transportation
Refrigerant
www.parkerhose.com
Push-Lok
Tough Cover
Catalog 4400 US Hydraulic Hose
Visual Index
601 A-8 422 A-8 424 A-8
Hydraulic
Hydraulic
Hose
Worldwide
Hose
SAE 100R3 ISO 1436-1 TYPE 1SN Phosphate Ester Base Fluids
421WC A-9 426 A-9 AX A-9 482TC A-10
A
SAE 100R1 TYPE AT High Temperature Tough Cover
Protective Wire Cover SAE 100R1 TYPE AT One-Wire Braid SAE 100R1 TYPE AT
482ST A-10 BXX A-10 431 A-11 436 A-11
Super Tough- Compact - High

SAE 100R1 TYPE AT SAE 100R2 TYPE AT Compact - SAE 100R16 Temperature - SAE 100R16
Fittings
304 A-11 301LT A-12 451TC A-12 451ST A-12
B Low Temperature Tough Cover

Phosphate Ester Base Fluids SAE 100R2 TYPE AT SAE 100R17 Super Tough - SAE 100R17
341 A-12 302 A-13 471TC A-13 471ST A-13
Worldwide Tough Cover Super Tough

SAE 100R9 TYPE AT ISO 1436-1 TYPE 2 SN ISO 11237-1 TYPE 2 SC ISO 11237-1 TYPE 2 SC
Equipment
472TC A-13 351TC A-14 351ST A-14 721 A-14
Tough Cover Tough Cover

C
Super Tough
Two-Wire Braid 4,000 psi Constant W.P. 4,000 psi Constant W.P. SAE 100R12
721TC A-14 721ST A-14 772TC A-15 772ST A-15
Extreme Tough Cover

SAE 100R12 Super Tough - SAE 100R12 Tough Cover - SAE 100R12 Super Tough - SAE 100R12
774 A-15 711 A-15 781 A-16 P35 A-16
Accessories
Phosphate Ester Base Fluids Meets SAE 100R11 Performance SAE 100R13 SAE 100R13
D 782TC A-16 782ST A-16 701 A-17 731 A-17
Tough Cover Super Tough

SAE 100R13 SAE 100R13 ISO 3862-1 TYPE 4SP ISO 3862-1 TYPE 4SH
791TC A-18 792TC A-18 792ST A-18 761 A-19
Technical
Extreme Tough Cover

SAE 100R15 Tough Cover - SAE 100R15 Super Tough - SAE 100R15 ParMax - 8,000 psi
JK A-19
E
Jack Hose
A-2 Hose Products Division

Parker Hannifin Corporation
Wickliffe, Ohio
http://www.parkerhose.com
Visual Index
811 A-20 811HT A-20 881 A-21

Suction &
Return Line
Hydraulic
Hose
1/2 SAE Minimum Bend Radius 1/2 SAE Minimum Bend Radius
Hose
SAE 100R4 SAE 100R4 SAE 100R4
804 A-22 801 A-22 836 A-22
“Push-Lok” A
Multipurpose
Hose
Multipurpose -
Dry Air/Hot Water Multipurpose High Temperature
821 A-23 821FR A-23 831 A-23
Multipurpose -
Multipurpose Fire Resistant Cover Multipurpose - Heavy Duty
Fittings
271 A-24 SS23CG A-24 SS25UL A-24
Transportation
Hose
Compressed Natural Gas
B
Air Brake Hose and Liquefied Petroleum Gas Liquefied Petroleum Gas
293 A-25 221FR A-25 213 A-26 266 A-26
Air Brake Hose Marine Fuel and Engine Hose SAE J1402 Al SAE J1402 All
Equipment
201 A-27 206 A-27 225 A-28
SAE 100R5 SAE J1402 All SAE 100R5 SAE J1402 All SAE 100R5 C
285 A-29 244 A-29
Refrigerant
Hose
SAE J2064 TYPE C SAE J2064 TYPE B
Accessories
D
Technical

Wickliffe, Ohio
How to Read
How to Read the Hose Section

Hydraulic
Hose
Parker offers a wide variety of hoses including braided, Parker Hose Nomenclature
A spiral, multi-purpose, transportation, refrigerant, Example: 451TC-8
451TC-8 - Hose Type
LPGas and more. Parker’s product line has been
451TC-8 - Indicates the special feature of the
tested and approved to meet and exceed global hose (in this case,‘Tough Cover’)
standards. Hose range in size from 3/16” to 3” I.D. 451TC-8 - Hose inside diameter dash size (in
and are compatible with crimp and field-attachable this case, 8/16” or 1/2”)
style fittings. Specific hose information is displayed
throughout Catalog 4400, Section A. Hose page
content is defined by the information shown below.
Please take a moment and review.
Fittings
B Hose Working Pressure

Should have a working pressure
rating meeting or exceeding the Minimum Bend Radius
maximum operating pressure Is the smallest arc that the hose can be bent
of the system. (Maximum rating before its life is greatly reduced. Exceeding the
Hose Outer Diameter listed below in which the hose is bend radius can cause kinking, inner tube wash-
A critical measurement when to be used.) out, and excessive stress on reinforcement.
considering hose clamps and
applications where envelope Weight
size is limited. Provided by the foot for in-
Equipment
stances where it is a critical

parameter in the design of
Hose Inner Diameter
the system.
Measured in 1/16 inch
Approved Fitting
C
increments identified by
use of a “dash”(-) num- To be utilized with the hose.
bering system. i.e., Could be crimped or field
4/16” = 1/4” = -4. attachable.
Lists hose
part numbers
on page
Hose
��
Information
��
•Base part
Accessories
number
•Description ��
•SAE, ISO, and �� Visually
��
��
EN specifica- shows hose
��
tions construction
D A
��
��
��
Indicates Hose
��
Section �
��
�
��
��
�� For more infor-
��
�� • �� mation
• regarding hose
��
��

��
�� • application and
• ��
Technical
��

temperature,
B
��
�� • see the Techni-
��
� ��
�� •
cal Section
(Section E)
E
Dot indicates what fitting
size is available.
��
��
��
��
� ��
� ��
��
C
��
��
��
�� A-4
��
Hose Products Division
��
�� • Parker Hannifin Corporation
��
�� • Wickliffe, Ohio
��
�� • http://www.parkerhose.com
��
�� • ��
��
�� •
Hose Assembly Nomenclature
How to Order Crimped Hose Assemblies
Hydraulic
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8 Box 9 Box 10 Box 11
Hose
F 436 06 39 08 08 08 -24
Parker 436-8
OAL
← →
Fittings
Box 1: Prefix Box 7: Hose Size
Symbol
F=
Description
Parkrimp Crimp Fittings (i.e 43 Series)
Symbol
08 =
Description
1/2 inch Hose Inner Diameter
B
P= Parkrimp Crimp Fittings (i.e 26 Series)
Y= Permanent Crimp Fittings(i.e HY Series)
K= Permanent Crimp Fittings (i.e 81 Series) Box 8: Fitting Material
Symbol Description
Box 2: Hose Type No Suffix = Steel
B= Brass
Equipment
Symbol Description C= 316 Stainless Steel
436 = SAE 100R16 Hose BA= Brass nipple with steel nut and socket
BS= Brass nipple with brass nut and steel socket
Note: see page A-7 for complete list of Parker Hoses
Box 3: 1st Fitting End Configuration

Box 9:
Symbol
Over All Length (OAL)
Description C
Symbol Description 24 = Expressed in inches (610 mm)
06 = Female JIC 37 Degree Swivel Straight
OAL of a hose assembly is measured from the
end of the straight fitting or centerline of the
Note: See page E-17 for a complete list of fitting configurations
fitting seat. OAL of the Seal-Lok® hose assembly
is measured to the sealing surface of the straight
Accessories
Box 4: 2nd Fitting End Configuration fittings or to the centerline of the elbow fittings
Symbol Description Box 10: Displacement Angle

39 = Female JIC 37 Degree Swivel 90 Symbol Description
Degree Elbow - Short Drop
270 Specified only if two (2) elbow fittings D
are used. Starting with either end as the far
end, measure angle clockwise to describe the
Box 5: 1st Fitting End Connection Size
displacement angle of the near end
Symbol Description
08 = 1/2” Female JIC (3/4x16 Thread) Box 11: Hose Assembly Guards
Symbol Description
Technical
SG = Spring Guard
Box 6: 2nd Fitting End Connection Size AG = Armor Guard
HG = Polyguard
Symbol Description PG = Parkoil
08 = 1/2” Female JIC (3/4x16 Thread) FS =
AS =
Fire Sleeve
Partek Sleeving E
PS = Partek Sleeving
Note: When spelling out an assembly part number list
entire sleeving part number

Wickliffe, Ohio
Hose Assembly Nomenclature
How to Order Field Attachable Hose Assemblies

Hydraulic
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8 Box 9 Box 10 Box 11
Hose
R 201 06 39 06 06 08 -24
Parker 201-8
20620-6-8 23920-6-8
OAL
← →
Fittings
Box 1: Prefix Box 7: Hose Size
B Symbol
R=
Description
Field Attachable i.e. 20 Series
Symbol
08 =
Description
13/32 inch Hose Inner Diameter
M= Mandrel i.e 23 and 23 Series
B= Clamp i.e 88HC-H and 88DB on 88 Series
C= Worm Gear Clamp i.e. 88H Series on 88 Box 8: Fitting Material
Series
Symbol Description
Box 2: Hose Type No Suffix = Steel
B= Brass
Equipment
Symbol Description
C= 316 Stainless Steel
201 = SAE 100R5 BA= Brass nipple with steel nut and socket
BS= Brass nipple with brass nut and steel socket
Note: see page A-7 for complete list of Parker Hoses
C Box 3: 1st Fitting End Configuration

Box 9: Over All Length (OAL)
Symbol Description
Symbol Description 24 = Expressed in inches (610 mm)
06 = Female JIC 37 Degree Swivel - Str.
OAL of a hose assembly is measured from the
Note: See page E-17 for a complete list of fitting configurations end of the straight fitting or centerline of the
fitting seat. OAL of the Seal-Lok® hose assembly
is measured to the sealing surface of the straight
Accessories
Box 4: 2nd Fitting End Configuration fittings or to the centerline of the elbow fittings
Symbol Description
Box 10: Displacement Angle
39 = JIC 37 Degree Flare Elbow
Symbol Description
D 270 Specified only if two (2) elbow fittings
are used. Starting with either end as the far
Box 5: 1st Fitting End Connection Size end, measure angle clockwise to describe the
displacement angle of the near end
Symbol Description
06 = 3/8” JIC (9/16x18 Thread)

Box 11: Hose Assembly Guards
Symbol Description
Technical
Box 6: 2nd Fitting End Connection Size SG = Spring Guard

AG = Armor Guard
Symbol Description HG = Polyguard
PG = Parkoil
E
06 = 3/8” JIC (9/16x18 Thread)
FS = Fire Sleeve
AS = Partek Sleeving
PS = Partek Sleeving
Note: When spelling out an assembly part number list
entire sleeving part number

Wickliffe, Ohio
Hose Overview Chart
Working Pressure (psi) Standard

Hose Hose
Temp. SAE ISO EN Page
Size Reinforcement
–3 –4 –5 –6 –8 –10 –12 –16 –20 –24 –32 –40 –48 Range °F
Hydraulic
601 2-braids, fiber 1250 1125 1000 750 565 –40/+257 100R3 4079-1-R3 A-8
Hose
422 1-braid, wire 3250 3125 2600 2325 1875 1525 1275 900 725 575 –40/+212 100R1AT 1436-1-1SN A-8
424 1-braid, wire 1000 625 500 375 –40/+176 100R1AT A-8
421WC
426
1-braid, wire
1-braid, wire
2750
2750
2250 2000 1250 1000
2250 2000 1500 1250 1000 625 500 375
–40/+257
–50/+302 100R1AT
A-9
A-9
A
AX 1-braid, wire 3000 3000 2500 1500 1250 1000 –40/+212 A-9
482TC/ST 1-braid, wire 3250 3250 3000 2500 2000 1750 1275 –40/+212 100R1AT 1436-1-1SN 853-1SN A-10
BXX 2-braids, wire 5000 4000 3500 2750 2250 2000 –40/+212 100R2AT A-10
431 2-braids, wire 5000 4250 4000 3500 2750 2250 2000 –40/+257 100R16 A-11
436 2-braids, wire 4000 3500 2750 2250 2000 –55/+302 100R16 A-11
304 2-braids, wire 5000 4000 3500 2250 2000 1625 1250 1125 –40/+176 A-11
301LT 2-braids, wire 5000 4000 3500 2250 2000 –67/+212 100R2AT A-12
451TC/ST 1-braid, wire 3000 3000 3000 3000 3000 3000 3000 –40/+212 100R17 A-12
Fittings
341 4-spiral, wire 4500 4000 3000 3000 2500 –40/+212 100R9AT A-12
302 2-braids, wire 5800 5000 4750 4000 3600 3100 2400 1800 1300 1150 –40/+212 100R2AT 1436-1-2SN A-13
Hydraulic
471TC/ST 2-braids, wire 5800 5000 4250 3625 3125 2500 –40/+212 11237-1-2SC 857-2SC A-13
472TC
351TC/ST
2-braids, wire
2-braids, wire 4000 4000 4000 4000 4000 4000
2250 1800 1300 –40/+212
–40/+212
A-13
A-14
B
721/721TC 4-spiral, wire 4000 4000 4000 4000 4000 3000 2500 2500 –40/+257 100R12 3862-1-R12 856-R12 A-14
721ST 4-spiral, wire 4000 4000 4000 4000 3000 –40/+257 100R12 3862-1-R12 856-R12 A-14
772TC/ST 4-spiral, wire 4000 4000 4000 4000 4000 3000 2500 2500 –40/+257 100R12 3862-1-R12 856-R12 A-15
774 4-spiral, wire 4000 4000 3000 2500 2500 –40/+176 A-15
711 4-spiral, wire 3000 3000 –40/+212 100R11 A-15
781/P35 4/6-spiral, wire 5000 5000 5000 5000 –40/+257 100R13 3862-1-R13 856-R13 A-16
782TC/ST 4/6-spiral, wire 5000 5000 5000 5000 –40/+257 100R13 3862-1-R13 856-R13 A-16
Equipment
701 4-spiral, wire 6500 6000 5000 –40/+212 3862-1-4SP 856-4SP A-17
731 4-spiral, wire 6000 5500 4700 4200 3600 –40/+212 3862-1-4SH 856-4SH A-17
791TC 4/6-spiral, wire 6000 6000 6000 6000 –40/+257 100R15 3862-1-R15 A-18
792TC/ST 4/6-spiral, wire 6000 6000 6000 –40/+257 100R15 3862-1-R15 A-18
761
JK
6-spiral, wire
2-braids, wire 10500 10000
8000 –40/+257
–40/+120
A-19
A-19
C
811/811HT with HC 1-braid, 1-spiral wire 100 70 50 50 50 62 –40/+212 100R4 A-20
Suction &
Return
881 with HC 2-braids, 1-spiral wire 100 70 50 50 50 62 –40/+257 100R4 A-21

811/811HT with 81 1-braid, 1-spiral wire 300 250 200 150 100 62 –40/+212 100R4 A-20
881 with 43/81/DB 2-braids, 1-spiral wire 300 250 200 150 100 62 –40/+257 100R4 A-21
804 1-braid, fiber 150 150 150 150 –40/+176 A-22
801 1-braid, fiber 250 250 250 250 250 175 –40/+212 A-22
Push-Lok
Accessories
836 1-braid, fiber 250 250 250 250 –55/+302 A-22
821 1-braid, fiber 350 300 300 250 250 –40/+212 A-23
821FR 1-braid, fiber 350 300 300 250 –40/+212 A-23
831 1-braid, fiber 350 300 300 300 300 –40/+212 A-23
271 1-braid, fiber 225 225 –50/+212 J1402 A A-24
SS23CG
SS25UL
1-braid, wire
1-braid, wire 350 350
350
350
350
350
350
350
350
350
–40/+250
–40/+250
A-24
A-24
D
Transportation
293 1-braid, fiber 500 500 500 450 450 450 –58/+302 J1402 AI A-25
J1527
221FR 1-braid, wire 500 500 500 500 500 500 –4/+212 7840 A-25
R3/J1942
213 1-braid, wire 2000 1500 1500 1250 1000 750 400 300 300 200 –50/+302 J1402 AI A-26
266 1-braid, wire 2000 1500 1500 1250 1250 750 400 300 250 –55/+302 J1402 AII A-26
100R5/
201 1-braid, wire 3000 3000 2250 2000 1750 1500 800 625 500 350 350 200 –40/+302 J1402 A-27
AII
100R5/
206 1-braid, wire 3000 3000 2250 2000 1750 1500 800 625 500 350 350 –55/+302 J1402 A-27
AII
225 1-braid, wire 3000 3000 2250 2000 1750 1500 800 625 500 350 –40/+212 A-28
Technical
J2064
Refrigerant
285 1-braid, wire 500 500 500 500 500 –22/+257 A-29
Type C
J2064
244 1-braid, wire 500 500 500 –22/+257 Type B A-29
Class 1

Wickliffe, Ohio
601, 422, 424
601
Hydraulic
Hydraulic
SAE 100R3
Application: Petroleum base
Hose
hydraulic fluids and lubricating

Part Working Minimum oils.
A Number Hose I.D.

inch mm
Hose O.D.
inch mm
Pressure
psi MPa
Bend Radius
inch mm
Weight
lbs/ft kg/m
Parkrimp
43 Series
Inner Tube: Synthetic rubber.
Reinforcement: Two fiber
601-4 1/4 6,3 0.56 14 1250 8,6 3 75 0.13 0,19 • braids.
601-6 3/8 10 0.75 19 1125 7,8 4 100 0.22 0,33 • Cover: Synthetic rubber, MSHA
accepted.
601-8 1/2 12,5 0.92 23 1000 6,9 5 125 0.28 0,42 • Temperature Range: -40°F to
601-12 3/4 19 1.24 32 750 5,2 6 150 0.43 0,64 • +257°F (-40°C to +125°C).
601-16 1 25 1.50 38 565 3,9 8 200 0.61 0,91 • Fittings: 43 Series - pg. B-27.
Fittings
422
Hydraulic
B ISO 1436-1 TYPE 1SN/SAE 100R1 TYPE AT / EN 853 TYPE 1SN
hydraulic fluids and lubricating oils.
Part Working Minimum Field Inner Tube: Nitrile.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Attachable Reinforcement: One braid
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series 42 Series steel wire.
422-4 1/4 6,3 0.53 13 3250 22,5 4 100 0.16 0,24 • • Cover: Synthetic rubber.
• •
Equipment
422-5 5/16 8 0.59 15 3125 21,5 4-1/2 115 0.18 0,27 Temperature Range: -40°F to
422-6 3/8 10 0.68 17 2600 18,0 5 130 0.23 0,34 • • +212°F (-40°C to +100°C).
422-8 1/2 12,5 0.81 21 2325 16,0 7 180 0.29 0,43 • • Fittings: 43 Series - pg. B-27.
42 Series - pg. B-149.
422-10 5/8 16 0.94 24 1875 13,0 8 200 0.33 0,49 • •
C 422-12 3/4 19 1.09 28 1525 10,5 9-1/2 240 0.42 0,63 • •
422-16 1 25 1.41 36 1275 8,8 12 300 0.63 0,94 • •
422-20 1-1/4 31,5 1.79 45 900 6,3 16-1/2 420 0.8 1,19 •
422-24 1-1/2 38 2 51 725 5,0 20 500 1 1,49 •
422-32 2 51 2.54 64 575 4,0 25 630 1.5 2,24 •
Accessories
424
D Hydraulic – Phosphate Ester Base Fluids
Application: Phosphate ester
base hydraulic fluids.
Part Working Minimum Vacuum Inner Tube: EPDM rubber.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Rating Parkrimp Reinforcement: One braid
inches steel wire.
inch mm inch mm psi MPa inch mm lbs/ft kg/m of Hg kPa 43 Series
Cover: EPDM rubber, green.
424-16 1 25 1.40 36 1000 6,9 12 300 0.63 0,94 20 68 • Temperature Range: -40°F to
424-20 1-1/4 31,5 1.73 44 625 4,3 16-1/2 420 0.80 1,19 20 68 • +176°F (-40°C to +80°C).
Technical
424-24 1-1/2 38 2.00 51 500 3,5 20 500 1.00 1,49 15 51 • Fittings: 43 Series - pg. B-27.
424-32 2 51 2.50 64 375 2,6 25 630 1.50 2,23 11 37 •
E
• Field Attachable Assembly Instructions are in Section B with each Fitting Series.
• See Section C for Parkrimp Assembly Instructions.
• Temperature Range of other media listed in Section E.

Wickliffe, Ohio
421WC, 426, AX
421WC
Hydraulic
SAE 100R1 TYPE AT – NO-SKIVE PROTECTIVE WIRE COVER
Hydraulic
Hose
Part Working Minimum Inner Tube: Synthetic rubber.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Reinforcement: One braid steel A
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series wire.
421WC-4 1/4 6,3 0.55 14 2750 19 4 100 0.26 0,39 • Cover: Synthetic rubber w/
421WC-6 3/8 10 0.71 18 2250 15,5 5 130 0.36 0,54 • galvanized steel wire over braid.
421WC-8 1/2 12,5 0.84 21 2000 13,8 7 180 0.45 0,67 • Temperature Range: -40°F to
+257°F (-40°C to +125°C).
421WC-12 3/4 19 1.12 28 1250 8,6 9-1/2 240 0.64 0,95 •
421WC-16 1 25 1.43 36 1000 6,9 12 300 0.88 1,31 • Fittings: 43 Series - pg. B-27.
Fittings
426
Hydraulic − High Temperature
SAE 100R1 TYPE AT B
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Inner Tube: PKR®.
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series Reinforcement: One braid steel
426-4 1/4 6,3 0.53 13 2750 19,2 4 100 0.16 0,24 • wire.
•
Equipment
426-6 3/8 10 0.68 17 2250 15,7 5 125 0.23 0,34 Cover: PKR®. rubber, blue.
426-8 1/2 12,5 0.81 21 2000 14,0 7 180 0.29 0,43 • Temperature Range: -50°F to
+302°F (-46°C to +150°C).
426-10 5/8 16 0.94 24 1500 10,5 8 200 0.33 0,49 •
426-12 3/4 19 1.09 28 1250 8,7 9-1/2 240 0.44 0,65 • Fittings: 43 Series - pg. B-27.
426-16 1 25 1.40 36 1000 7,0 12 300 0.66 0,98 • C
426-20 1-1/4 31,5 1.79 45 625 4,3 16-1/2 420 0.94 1,40 •
426-24 1-1/2 38 2.00 51 500 3,5 20 500 0.98 1,46 •
426-32 2 51 2.54 64 375 2,6 25 630 1.46 2,18 •
Accessories
AX
Hydraulic
Part Working Minimum

Inner Tube: Synthetic Rubber.
D
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Reinforcement: One braid steel
inch mm inch mm psi MPa inch mm lbs/ft kg/m HY Series wire.
AX04 1/4 6,3 0.50 13 3000 21 2 50 0.15 0,22 • Cover: Synthetic rubber, MSHA
AX06 3/8 10 0.62 16 3000 21 2-1/2 65 0.19 0,28 • accepted.
AX08 1/2 12,5 0.75 19 2500 17,5 3-1/2 90 0.24 0,36 • Temperature Range: -40°F to
+212°F (-40°C to +100°C).
AX10 5/8 16 0.88 22 1500 10,5 4 100 0.29 0,43 •
Fittings: HY Series - pg. B-102.
Technical
AX12 3/4 19 1.01 26 1250 8,7 4-3/4 120 0.34 0,51 •

AX16 1 25 1.29 33 1000 7 6 150 0.48 0,72 •
E

Wickliffe, Ohio
482TC, 482ST, BXX
482TC
Hydraulic –
Hydraulic
SAE 100R1 TYPE AT / ISO 1436-1 TYPE 1SN / EN853 TYPE 1SN
Hose
A 482ST
Hydraulic –
SAE 100R1 TYPE AT / ISO 1436-1 TYPE 1SN / EN853 TYPE 1SN
Part Working Minimum Field Application: Petroleum base

Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Attachable oils.
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series 42 Series
Inner Tube: Nitrile.
Fittings
482TC/ST-4 1/4 6,3 0.53 14 3250 22,7 2 50 0.16 0,24 • • Reinforcement: One braid steel
482TC-5 5/16 8 0.59 15 3250 22,7 2-1/4 55 0.18 0,27 • • wire.
482TC/ST-6 3/8 10 0.69 17 3000 21,0 2-1/2 65 0.23 0,34 • • Cover: Synthetic rubber abrasion
B 482TC/ST-8 1/2 12,5 0.82 21 2500 17,5 3-1/2 90 0.29 0,43 • • resistant, MSHA accepted.
482TC/ST-10 5/8 16 0.94 24 2000 14,0 4 100 0.33 0,49 • • Temperature Range: -40°F to
+212°F (-40°C to +100°C).
482TC/ST-12 3/4 19 1.09 28 1750 12,2 4-3/4 120 0.42 0,63 • •
Fittings: 43 Series - pg. B-27.
482TC/ST-16 1 25 1.41 36 1275 8,8 6 150 0.63 0,94 • • 42 Series - pg. B-149
BXX
Equipment
Hydraulic
SAE 100R2 TYPE AT
C Application: Petroleum base

oils.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Inner Tube: Synthetic rubber.
inch mm inch mm psi MPa inch mm lbs/ft kg/m HY Series Reinforcement: Two braids
BXX04 1/4 6,3 0.59 15 5000 35 4 100 0.27 0,40 • steel wire.
BXX06 3/8 10 0.74 19 4000 28 5 125 0.38 0,57 • Cover: Synthetic rubber, MSHA
accepted.
BXX08 1/2 12,5 0.87 22 3500 24,5 7 180 0.46 0,69 • Temperature Range: -40°F to
Accessories
BXX10 5/8 16 1.00 25 2750 19,2 8 200 0.55 0,82 • +212°F (-40°C to +100°C).
BXX12 3/4 19 1.15 29 2250 15,7 9-1/2 240 0.65 0,97 • Fittings: HY Series - pg. B-102.
BXX16 1 25 1.49 38 2000 14 12 305 0.98 1,46 •
D
Technical
E

Wickliffe, Ohio
431, 436, 304
431 
Hydraulic –
SAE 100R16 / ISO 11237 TYPE R16
Hydraulic
Hose
Part Working Minimum Field Inner Tube: Synthetic rubber.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Attachable Reinforcement: Two braids steel A
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series 42 Series wire.
431-4 1/4 6,3 0.53 13 5000 34,5 2 50 0.18 0,27 • Cover: Synthetic rubber, MSHA
431-5 5/16 8 0.59 15 4250 29,3 2-1/4 55 0.24 0,36 • • accepted.
431-6 3/8 10 0.68 17 4000 27,5 2-1/2 65 0.28 0,42 • • Temperature Range: -40°F to
+257°F (-40°C to +125°C).
431-8 1/2 12,5 0.81 21 3500 24 3-1/2 90 0.34 0,51 • •
431-10 5/8 16 0.94 24 2750 19 4 100 0.44 0.66 • • 42 Series - pg. B-149.
431-12 3/4 19 1.09 28 2250 15,5 4-3/4 120 0.54 0,80 • •
• •
Fittings
431-16 1 25 1.41 36 2000 13,8 6 150 0.82 1,22
436 
B
Hydraulic – High Temperature
SAE 100R16 / ISO 11237 TYPE R16
Part Working Minimum Field Inner Tube: PKR®
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Attachable Reinforcement: Two braids steel
Equipment
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series 42 Series wire.
436-6 3/8 10 0.68 17 4000 27,5 2-1/2 65 0.28 0,42 • • Cover: PKR rubber, blue, MSHA
436-8 1/2 12,5 0.81 21 3500 24 3-1/2 90 0.34 0,51 • • accepted.
436-10 5/8 16 0.94 24 2750 19 4 100 0.44 0,66 • • Temperature Range: -55°F to
436-12 3/4 19 1.09 28 2250 15,5 4-3/4 120 0.54 0,80 • • +302°F (-48°C to +150°C).
C
436-16 1 25 1.41 36 2000 13,8 6 150 0.82 1,22 • • 42 Series - pg. B-149.
304
Hydraulic − Phosphate Ester Base Fluids
Accessories
Part Working Minimum Inner Tube: EPDM rubber.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series
Reinforcement: Two braids steel
wire. D
304-4 1/4 6,3 0.59 15 5000 34,5 4 100 0.26 0,39 • Cover: EPDM rubber, green.
304-6 3/8 10 0.75 19 4000 27,5 5 130 0.37 0,55 • Temperature Range: -40°F to
304-8 1/2 12,5 0.88 22 3500 24 7 180 0.45 0,67 • +176°F (-40°C to +80°C).
304-12 3/4 19 1.16 29 2250 15,5 9-1/2 240 0.67 1,00 • Fittings: 43 Series - pg. B-27.
304-16 1 25 1.50 38 2000 13,8 12 300 1.00 1,49 •
304-20 1-1/4 31,5 1.86 47 1625 11,2 16-1/2 420 1.16 1,73 •
304-24 1-1/2 38 2.14 54 1250 8,6 20 500 1.44 2,14 •
Technical
304-32 2 51 2.64 67 1125 7,8 25 630 1.99 2,96 •
E

Wickliffe, Ohio
301LT, 451TC, 451ST, 341
301LT
Hydraulic – Low Temperature
Hydraulic
SAE 100R2 TYPE AT

Hose

Part Working Minimum oil.
A Number Hose I.D.
inch mm
Hose O.D.
inch mm
Pressure
psi MPa
Bend Radius
inch mm
Weight
lbs/ft kg/m
Parkrimp
43 Series
Inner Tube: Synthetic Rubber.
Reinforcement: Two braids
301LT-4 1/4 6,3 0.59 15 5000 35,0 4 100 0.26 0,39 • steel wire.
301LT-6 3/8 10 0.75 19 4000 28,0 5 130 0.37 0,55 • Cover: PKR Rubber.
301LT-8 1/2 12,5 0.88 22 3500 24,5 7 180 0.45 0,67 • Temperature Range: -67°F to
301LT-12 3/4 19 1.16 29 2250 15,7 9-1/2 240 0.67 1,00 • +212°F (-55°C to +100°C).
301LT-16 1 25 1.50 38 2000 14,0 12 300 1.00 1,49 • Fittings: 43 Series - pg. B-27.
Fittings
451TC
Hydraulic –
B SAE 100R17 / ISO 11237 - 1 TYPE R17 - Constant Working Pressure
451ST
Hydraulic –
SAE 100R17 / ISO 11237 - 1 TYPE R17 - Constant Working Pressure
Equipment

oils.
C
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series Reinforcement: One or two
451TC/ST-4 1/4 6,3 0.52 13 3000 21,0 2 50 0.16 0,24 • braid steel wire (4-spiral for
size -20).
451TC/ST-6 3/8 10 0.68 17 3000 21,0 2-1/2 65 0.23 0,34 • Cover: Synthetic rubber
451TC/ST-8 1/2 12,5 0.80 20 3000 21,0 3-1/2 90 0.35 0,52 • abrasion resistant, MSHA
451TC/ST-10 5/8 16 0.94 24 3000 21,0 4 100 0.44 0,66 • accepted.
451TC/ST-12 3/4 19 1.10 28 3000 21,0 4-3/4 120 0.58 0,86 • Temperature Range: -40°F to
+212°F (-40°C to +100°C).
451TC/ST-16 1 25 1.40 35 3000 21,0 6 150 0.79 1,17 •
451TC/ST-20 1-1/4 31,5 1.85 47 3000 21,0 8-1/4 210 1.50 2,23 •
Accessories
341
D Hydraulic
SAE 100R9 TYPE AT
oils.
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series Reinforcement: Four spiral
341-6 3/8 10 0.78 20 4500 31,5 5 130 0.50 0,74 • steel wire.
341-8 1/2 12,5 0.89 23 4000 28,0 7 180 0.62 0,92 • Cover: Synthetic rubber, MSHA
Technical
accepted.
341-12 3/4 19 1.17 30 3000 21,0 9-1/2 240 0.92 1,37 • Temperature Range: -40°F to
341-16 1 25 1.51 38 3000 21,0 12 300 1.28 1,90 • +212°F (-40°C to +100°C).
•
E
341-20 1-1/4 31,5 1.87 47 2500 17,5 16-1/2 420 1.79 2,66 Fittings: 43 Series - pg. B-27.


Wickliffe, Ohio
302, 471TC, 471ST, 472TC
302
Hydraulic –
ISO 1436-1 TYPE 2SN / SAE 100R2 TYPE AT / EN 853 TYPE 2SN
Hydraulic
Hose
Part Working Minimum Field oils.
Number Hose ID Hose O.D.
inch mm inch mm
Pressure Bend Radius
psi Mpa inch
Weight Parkrimp Attachable
mm lbs/ft kg/g 43 Series 30 Series
Inner Tube: Nitrile. A
Reinforcement: Two braids
302-4 1/4 6,3 0.59 15,0 5800 40 4 100 0.26 0,39 • • steel wire.
302-5 5/16 8 0.65 16,6 5000 35 4-1/2 115 0.28 0,42 • Cover: Synthetic rubber.
302-6 3/8 10 0.75 19,0 4750 33 5 130 0.37 0,55 • • Temperature Range: -40°F to
+212°F (-40°C to +100°C).
302-8 1/2 12,5 0.88 22,3 4000 28 7 180 0.45 0,67 • •
302-10 5/8 16 1.00 25,5 3600 25 8 200 0.52 0,77 • • 30 Series - pg. B-143.
302-12 3/4 19 1.16 29,4 3100 21,5 9-1/2 240 0.67 1,00 • •
• •
Fittings
302-16 1 25 1.50 38,1 2400 16,5 12 300 1.00 1,49
302-20 1-1/4 31,5 1.86 47,1 1800 12,5 16-1/2 420 1.16 1,73 • •
302-24 1-1/2 38 2.14 54,5 1300 9 20 500 1.44 2,14 • •
302-32 2 51 2.64 67,2 1150 8 25 630 1.99 2,96 • • B
471TC
Hydraulic –
ISO 11237-1 TYPE 2SC / EN 857 TYPE 2SC
471ST
Equipment
Hydraulic –
ISO 11237-1 TYPE 2SC / EN 857 TYPE 2SC
oils.
C
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series Reinforcement: Two braids
471TC/ST-4 1/4 6,3 .51 13 5800 40,0 2 50 0.20 0,30 • steel wire.
471TC/ST-6 3/8 10 .68 17 5000 35,0 2-1/2 65 0.28 0,42 • Cover: Synthetic rubber
abrasion resistant, MSHA
471TC/ST-8 1/2 12,5 .80 20 4250 29,7 3-1/2 90 0.35 0,52 • accepted.
•
Accessories
471TC/ST-10 5/8 16 .94 24 3625 25,0 4 100 0.44 0,66 Temperature Range: -40°F to
471TC/ST-12 3/4 19 1.09 28 3125 21,5 4-3/4 120 0.58 0,86 • +212°F (-40°C to +100°C).
471TC/ST-16 1 25 1.40 35 2500 17,5 6 150 0.79 1,17 • Fittings: 43 Series - pg. B-27.
D
472TC
Hydraulic –
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Inner Tube: Nitrile.
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series Reinforcement: Two braids
Technical
472TC-20 1-1/4 31,5 1.79 45 2250 15,7 8-1/4 210 1.34 2,01 • steel wire.
472TC-24 1-1/2 38 2.01 51 1800 12,5 10 250 1.44 2,16 • Cover: Synthetic rubber
abrasion resistant, MSHA
472TC-32 2 51 2.54 65 1300 9,0 12-1/2 315 1.93 2,90 •
E
accepted.
Temperature Range: -40°F to
+212°F (-40°C to +100°C).
• See Section C for Parkrimp Assembly Instructions. Fittings: 43 Series - pg. B-27.

Wickliffe, Ohio
351TC, 351ST, 721, 721TC, 721ST
351TC
Hydraulic –
Hydraulic
Constant Working Pressure

Hose
351ST
Hydraulic –
A Constant Working Pressure
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Reinforcement: Two braids steel
351TC/ST-4 1/4 6,3 .51 13 4000 28 2 50 0.20 0,30 • Cover: Synthetic rubber abrasion
351TC/ST-6 3/8 10 .67 17 4000 28 2-1/2 65 0.28 0,42 • resistant, MSHA accepted.
351TC/ST-8 1/2 12,5 .80 20 4000 28 3-1/2 90 0.35 0,52 • Temperature Range: -40°F to
Fittings
+212°F (-40°C to +100°C).

351TC/ST-10 5/8 16 .93 24 4000 28 4 100 0.44 0,66 •
351TC/ST-12 3/4 19 1.09 28 4000 28 4-3/4 120 0.58 0,86 •
B
721
Hydraulic
SAE 100R12 / ISO 3862-1 TYPE R12 / EN 856 TYPE R12
721TC
Hydraulic – Tough Cover
Equipment

C Number Hose I.D.

inch mm
Hose O.D.
inch mm
psi MPa inch
Weight
mm lbs/ft kg/m
Parkrimp
71 Series
Reinforcement: Four spiral steel
wire.
721/721TC-6 3/8 10 0.80 20 4000 28,0 2-1/2 62,5 0.40 0,60 • Cover: Synthetic rubber abrasion
721/721TC- 8 1/2 12,5 0.93 24 4000 28,0 3-1/2 90 0.62 0,93 • resistant, MSHA accepted.
721/721TC-10 5/8 16 1.08 27 4000 28,0 4 100 0.74 1,10 • Temperature Range: -40°F to
+257°F (-40°C to +125°C).
721/721TC-12 3/4 19 1.21 31 4000 28,0 4-3/4 120 0.94 1,40 •
721/721TC-16 1 25 1.50 38 4000 28,0 6 150 1.34 1,99 •
721/721TC-20 1-1/4 31,5 1.84 46 3000 21,0 8-1/4 210 1.74 2,59 •
Accessories
721/721TC-24 1-1/2 38 2.07 53 2500 17,5 10 250 2.01 2,99 •

721/721TC-32 2 51 2.59 66 2500 17,5 12-1/2 320 2.75 4,09 •
721ST
D Hydraulic –
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Reinforcement: Four spiral steel
721ST-8 1/2 12,5 0.94 24 4000 28,0 3-1/2 90 0.54 0,80 • Cover: Synthetic rubber abrasion
Technical
721ST-10 5/8 16 1.08 27 4000 28,0 4 100 0.74 1,10 • resistant, MSHA accepted.
721ST-12 3/4 19 1.21 31 4000 28,0 4-3/4 120 0.94 1,40 • Temperature Range: -40°F to
+257°F (-40°C to +125°C).
721ST-16 1 25 1.50 38 4000 28,0 6 150 1.34 1,99 •
E 721ST-20 1-1/4 31,5 1.84 46 3000 21,0 8-1/4 210 1.74 2,59 • Fittings: 71 Series - pg. B-63.


Wickliffe, Ohio
772TC, 772ST, 774, 711
772TC
Hydraulic –
Hydraulic
Hose
772ST
Hydraulic – A
Part Working Minimum Inner Tube: Nitrile.
772TC/ST-6 3/8 10 0.79 20 4000 28,0 5 125 0.40 0,60 • Cover: Synthetic rubber abrasion
772TC/ST-8 1/2 12,5 0.94 24 4000 28,0 7 180 0.62 0,93 • resistant, MSHA accepted.
Fittings
772TC/ST-10 5/8 16 1.08 27 4000 28,0 8 200 0.74 1,10 • Temperature Range: -40°F to
+257°F (-40°C to +125°C).
772TC/ST-12 3/4 19 1.21 31 4000 28,0 9-1/2 240 0.94 1,40 •
•
B
772TC/ST-16 1 25 1.50 38 4000 28,0 12 300 1.34 1,99
772TC/ST-20 1-1/4 31,5 1.84 46 3000 21,0 16-1/2 420 1.74 2,59 •
772TC/ST-24 1-1/2 38 2.07 53 2500 17,5 20 500 2.01 2,99 •
772TC/ST-32 2 51 2.59 66 2500 17,5 25 630 2.75 4,09 •
774
Equipment
Hydraulic – Phosphate Ester Base Fluids
Part
Number Hose I.D. Hose O.D.
Working
Pressure
Minimum
Bend Radius Weight Parkrimp
Inner Tube: EPDM rubber.
Reinforcement: Four spiral steel C
774-12 3/4 19 1.21 31 4000 28,0 9-1/2 240 0.94 1,40 • Cover: EPDM rubber, green.
774-16 1 25 1.50 38 4000 28,0 12 300 1.34 1,99 • Temperature Range: -40°F to
774-20 1-1/4 31,5 1.84 46 3000 21,0 16-1/2 420 1.74 2,59 • +176°F (-40°C to +80°C).
774-24 1-1/2 38 2.07 53 2500 17,5 20 500 2.01 2,99 • Fittings: 71 Series - pg. B-63.
774-32 2 51 2.59 66 2500 17,5 25 630 2.75 4,09 •
Accessories
711
Hydraulic
Meets SAE 100R11 Performance
D
inch mm inch mm psi MPa inch mm lbs/ft kg/m 71 Series Reinforcement: Four spiral
711-24 1-1/2 38,0 2.07 53 3000 21,0 22 560 2.01 2,99 • steel wire.
711-32 2 51,0 2.59 66 3000 21,0 28 710 2.75 4,09 • Cover: Synethetic rubber,
Technical
MSHA accepted.
+212°F (-40°C to +100°C).
E

Wickliffe, Ohio
781, P35, 782TC, 782ST
781
Hydraulic
Hydraulic
SAE 100R13 / ISO 3862-1 TYPE R13 / EN856 TYPE R13

Hose
A P35
Hydraulic
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Parkrimp Reinforcement: Four or six spiral
inch mm inch mm psi MPa inch mm lbs/ft kg/m 78 Series S6 Series steel wire.
•
Fittings
781-12 3/4 19 1.26 32 5000 35,0 9-1/2 240 1.07 1,59 Cover: Synethetic rubber, MSHA
781-16 1 25 1.52 39 5000 35,0 12 300 1.48 2,20 • accepted.
781-20 1-1/4 31,5 1.96 50 5000 35,0 16-1/2 420 2.48 3,69 • Temperature Range: -40°F to
B 781-24 1-1/2 38 2.26 57 5000 35,0 20 500 3.22 4,79 •

+257°F (-40°C to +125°C).
P35-32 2 51 2.80 71 5000 35,0 25 630 5.03 7,48 • S6 Series - pg.B-87
NOTE: P35-32 Hose must be crimped with S6 Series fittings.
782TC
Hydraulic –
Equipment
782ST
C Hydraulic –
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Reinforcement: Four or six spiral
inch mm inch mm psi MPa inch mm lbs/ft kg/m 78 Series steel wire.
782TC/ST-12 3/4 19 1.26 32 5000 35,0 9-1/2 240 1.07 1,59 • Cover: Synthetic rubber abrasion
Accessories
782TC/ST-16 1 25 1.52 39 5000 35,0 12 300 1.48 2,20 • resistant, MSHA accepted.
782TC/ST-20 1-1/4 31,5 1.96 50 5000 35,0 16-1/2 420 2.48 3,69 • Temperature Range: -40°F to
+257°F (-40°C to +125°C).
782TC/ST-24 1-1/2 38 2.26 57 5000 35,0 20 500 3.22 4,79 •
D
Technical
E

Wickliffe, Ohio
701, 731
701
Hydraulic
ISO 3862-1 TYPE 4SP / EN 856 TYPE 4SP
Hydraulic
Hose
Number Hose I.D.
inch mm
Hose O.D.
inch mm
Pressure
psi
Bend Radius
MPa inch mm
Weight
lbs/ft kg/m
Parkrimp
70 Series
Reinforcement: Four spiral steel
wire.
A
701-6 3/8 10 0.84 21 6500 45,0 7 180 0.52 0,78 • Cover: Synthetic rubber, MSHA
701-8 1/2 12,5 0.97 25 6000 41,5 9 230 0.62 0,93 • accepted.
701-10 5/8 16 1.11 28 5000 35,0 10 250 0.77 1,15 • Temperature Range: -40°F to
+212°F (-40°C to +100°C).
Fittings
731 B
Hydraulic
ISO 3862-1 TYPE 4SH / EN 856 TYPE 4SH
Equipment
731-12 3/4 19 1.27 32 6000 42,0 11 280 1.16 1,72 • Cover: Synthetic rubber.
731-16 1 25 1.52 39 5500 38,0 13-1/2 340 1.44 2,14 • Temperature Range: -40°F to
731-20 1-1/4 31,5 1.79 45 4700 32,5 18 460 1.99 2,96 • +212°F (-40°C to +100°C).
731-24
731-32
1-1/2
2
38
51
2.10
2.68
53
68
4200
3600
29,0
25,0
22
27
560
700
2.15
3.56
3,20
5,30
•
•
C
Accessories
D
Technical
E

Wickliffe, Ohio
791TC, 792TC, 792ST
791TC
Hydraulic – Tough Cover
Hydraulic
SAE 100R15 / ISO 3862-1 TYPE R15

Hose

A Part
Working Minimum
Pressure Bend Radius Weight Parkrimp
Reinforcement: Four or six spiral
inch mm inch mm psi MPa inch mm lbs/ft kg/m 79 Series steel wire.
791TC-12 3/4 19 1.26 32 6000 42,0 8 200 1.07 1,59 • Cover: Synthetic rubber abrasion
791TC-16 1 25 1.52 39 6000 42,0 10 250 1.48 2,20 • resistant, MSHA accepted.
791TC-20 1-1/4 31,5 1.97 50 6000 42,0 10 250 2.48 3,69 • Temperature Range: -40°F to
+257°F (-40°C to +125°C).
791TC-24 1-1/2 38 223 56,5 6000 42,0 12 305 3.22 4,79 •
Fittings
B 792TC
Hydraulic –
SAE 100R15 / ISO 3862-1 TYPE R15
792ST
Hydraulic –
SAE 100R15 / ISO 3862-1 TYPE R15
Equipment

C Number Hose I.D.
inch mm
Hose O.D.
inch mm
psi
Weight
MPa inch mm lbs/ft kg/m
Parkrimp
79 Series
Reinforcement: Four or six spiral
steel wire.
792TC/ST-12 3/4 19 1.26 32 6000 42,0 10-1/2 265 1.07 1,59 • Cover: Synthetic rubber abrasion
792TC/ST-16 1 25 1.52 39 6000 42,0 13 330 1.48 2,20 • resistant, MSHA accepted.
+257°F (-40°C to +125°C).
Accessories
D
Technical
E

Wickliffe, Ohio
761, JK
761
Hydraulic – ParMax
Hydraulic
Hose
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp
inch mm inch mm psi MPa inch mm lbs/ft kg/m 76 Series
Reinforcement: Six spiral steel wire.
Cover: Synthetic rubber. A
761-12 3/4 19 1.37 34,8 8000 56,0 10-1/2 260 1.56 2.32 • Temperature Range: -40°F to
761-16 1 25 1.65 41,9 8000 56,0 13 330 2.02 3.00 • +257°F (-40°C to +125°C).
Fittings
JK
Hydraulic – Jack Hose
Inner Tube: Nitrile B
Reinforcement: Two braids steel
Part Working Minimum wire
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Parkrimp Cover: Synthetic rubber, MSHA
inch mm inch mm psi MPa inch mm lbs/ft kg/m 43 Series accepted
JK-4 1/4 6,3 0.59 15 10500 72,4 4 100 0.26 0,39 • Temperature Range: -40°F to
JK-6 3/8 10 0.75 22 10000 70 5 125 0.37 0,55 • +120°F (-40°C to +49°C)
NOTE: THIS PRODUCT CAN ONLY BE ASSEMBLED BY CERTIFIED DISTRIBUTORS OR CUSTOMERS Fittings: 10143-4-4, 10143-4-6,
Equipment
ACCORDING TO THE METHODS PRESCRIBED IN BULLETIN 4480-T18-US. JK HOSE HAS A 2:1 SAFETY 10143-6-4, 10143-6-6
FACTOR. pg. B-29.
Accessories
D
Technical
E

Wickliffe, Ohio
Catalog 4400 US Suction and Return Line Hose
811, 811HT
811
Suction and Return Line
1/2 SAE Minimum Bend Radius
Suction &
SAE 100R4
Return
Hose
A Part
Number Hose I.D. Hose O.D.Working Pressure
Minimum
Bend Radius Weight
Vacuum
Rating Parkrimp
Field
Attachable
81/88DB 88HC inches 88 Series
inch mm inch mm psi MPa psi MPa inch mm lbs/ft kg/m of Hg kPa 81 Series w/HC or DB
811-12 3/4 19,0 1.18 30,0 300 2,1 100 0,7 2-1/2 64 0.42 0,63 25 84 • •
811-16 1 25,4 1.50 38,0 250 1,7 70 0,5 3 76 0.65 0,96 25 84 • •
811-20 1-1/4 31,8 1.77 45,0 200 1,4 50 0,3 4 102 0.82 1,22 25 84 • •
811-24 1-1/2 38,1 2.05 52,0 150 1 50 0,3 5 127 1.04 1,55 25 84 • •
811-32 2 50,8 2.50 63,6 100 0,7 50 0,3 6 152 1.26 1,87 25 84 • •
Fittings
811-40 2-1/2 63,5 3.00 76,2 62 0,4 62 0,4 7 178 1.64 2,45 25 84
Application: Petroleum base hydraulic fluids and lubricating oils.

B Inner Tube: Synthetic rubber.
Reinforcement: Multiple layers of fiber spiral and one helical wire.
Cover: Synthetic rubber.
Temperature Range: -40°F to +212°F (-40°C to +100°C).
Equipment
811HT
Suction and Return Line – High Temperature
1/2 SAE Minimum Bend Radius
C SAE 100R4
Part Minimum Vacuum Field

Number Hose I.D. Hose O.D. Working Pressure Bend Radius Weight Rating Parkrimp Attachable
81/88DB 88HC inches 88 Series
inch mm inch mm psi MPa psi MPa inch mm lbs/ft kg/m of Hg kPa 81 Series w/HC or DB
811HT-12 3/4 19,0 1.18 30,0 300 2,1 100 0,7 2-1/2 64 0.42 0,63 28 95 • •
Accessories
811HT-16 1 25,4 1.50 38,0 250 1,7 70 0,5 3 76 0.65 0,96 28 95 • •

811HT-20 1-1/4 31,8 1.77 45,0 200 1,4 50 0,3 4 102 0.82 1,22 28 95 • •
811HT-24 1-1/2 38,1 2.05 52,0 150 1 50 0,3 5 127 1.04 1,55 28 95 • •
D 811HT-32
811HT-40
2 50,8 2.50 63,6 100
2-1/2 63,5 3,00 76,2 62
0,7
0,4
50
62
0,3
0,4
6
7
152
178
1.26 1,87
1.82 2,71
28
28
95
95
• •

Cover: Synthetic rubber, MSHA accepted.
Technical

E
• See Section B for Field Attachable Assembly Instructions.

Wickliffe, Ohio
Catalog 4400 US Suction and Return Line Hose
881
881
Suction and Return Line
Suction &
SAE 100R4
Return
Hose
Part Minimum Vacuum Field
Number Hose I.D. Hose O.D. Working Pressure
43/81/88DB 88HC
Bend Radius Weight Rating
inches
Parkrimp Attachable
88 Series
A
inch mm inch mm psi MPa psi Mpa inch mm lbs/ft kg/m of Hg kPa 43/81 Series w/HC or DB
881-12 3/4 19,0 1.20 30,6 300 2,1 100 0,7 5 127 0.50 0,74 28 95 • •
881-16 1 25,4 1.49 37,9 250 1,7 70 0,5 6 152 0.60 0,89 28 95 • •
881-20 1-1/4 31,8 1.78 45,3 200 1,4 50 0,3 8 203 0.89 1,32 28 95 • •
881-24 1-1/2 38,1 2.06 52,4 150 1 50 0,3 10 254 1.11 1,65 28 95 • •
881-32 2 50,8 2.48 63,1 100 0,7 50 0,3 12 305 1.27 1,89 28 95 • •
881-40 2-1/2 63,5 3.00 76,2 62 0,4 62 0,4 14 356 1.82 2,71 28 95
Fittings
B
Cover: Synthetic rubber, MSHA accepted.
Equipment
C
Accessories
D
Technical
E

Wickliffe, Ohio
Catalog 4400 US “Push-Lok®” Multipurpose Hose
804, 801, 836
804
Multipurpose
Push-Lok
Dry Air/Hot Water

Hose
Application: Phosphate ester,

dry air and water.
A Part
Working
Pressure
Minimum
Bend Radius Weight
Vacuum
Rating
Field
Attachable
Inner Tube: EPDM rubber.
Reinforcement: One fiber braid.
inches
Cover: EPDM rubber.
inch mm inch mm psi MPa inch mm lbs/ft kg/m of Hg kPa 82 Series
804-4 1/4 6,3 0.50 12,7 150 1,7 2-1/2 64 0.09 0,13 15 51 • Temperature Range:
804-6 3/8 10 0.63 15,9 150 1,7 3 76 0.11 0,16 15 51 • Air: +158˚F (+70˚C)
Phosphate ester: +176˚F (+80˚C)
804-8 1/2 12,5 0.78 19,8 150 1,7 5 127 0.18 0,27 15 51 • Water: +200˚F (+93˚C).
804-12 3/4 19 1.03 26,2 150 1,7 7 178 0.24 0,36 15 51 • Fittings: 82 Series - pg. B-156.
Fittings
801
Multipurpose
B Available Cover Colors: GRA RED YEL BLU GRN BLK
Application: Pneumatic,
petroleum base hydraulic fluid,
Part Working Minimum Vacuum Field lubricating oils and antifreeze
solutions.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Rating Attachable
inches Inner Tube: Synthetic rubber.
inch mm inch mm psi MPa inch mm lbs/ft kg/m of Hg kPa 82 Series Reinforcement: One fiber braid.
801-4 1/4 6,3 0.50 12,7 250 1,7 2-1/2 65 0.09 0,13 28 95 • Cover: Synthetic rubber, MSHA
Equipment
801-6 3/8 10 0.63 15,9 250 1,7 3 75 0.11 0,16 28 95 • accepted

801-8 1/2 12,5 0.78 19,8 250 1,7 5 125 0.18 0,27 28 95 • Hose cover colors include: Gray,
Red, Yellow, Black, Green, and
801-10 5/8 16 0.91 23,0 250 1,7 6 150 0.19 0,28 15 51 • Blue.
C 801-12
801-16
3/4
1
19
25
1.03 26,2
1.28 32,6
250
175
1,7
1,2
7
10
180
250
0.24
0.37
0,36
0,55
15
15
51
51
•
•
Temperature Range:
Air: +158˚F (+70˚C)
Water: +185˚F (+85˚C)
Oil: -40˚F to 212˚F
(-40˚C to +100˚C).
Accessories
836
Multipurpose – High Temperature
D Part Working Minimum Vacuum Field
lubricating oils and antifreeze
solutions.
inches Inner Tube: PKR®
836-4 1/4 6,3 0.5 12,7 250 1,7 2-1/2 65 0.09 0,13 28 95 • Cover: Synthetic rubber, blue.
836-6 3/8 10 0.63 15,9 250 1,7 3 75 0.11 0,16 28 95 • Temperature Range:
836-8 1/2 12,5 0.78 19,8 250 1,7 5 125 0.18 0,27 28 95 • Air: +212˚F (+100˚C)
836-10 5/8 16 0.91 23,0 250 1,7 6 150 0.19 0,28 15 51 • Water: +185˚F (+85˚C)
Technical
Oil: -55˚F to +302˚F

(-48˚C to +150˚C).
E
• Push-Lok is not recommended for any fuel, refrigerant, or for use in air conditioners and heat pump applications.
• Push-Lok is not recommended for applications where extreme pulsation is encountered.
• See Section B for Assembly Instructions.

Wickliffe, Ohio
Catalog 4400 US “Push-Lok®” Multipurpose Hose
821, 821FR, 831
821
Multipurpose
Multipurpose
Push-Lok
Hose
Part
Number Hose I.D.
Working Minimum
Hose O.D. Pressure Bend Radius Weight
Vacuum
Rating
Field
Attachable
solutions.
A
inches
821-4 1/4 6,3 0.50 12,7 350 2,4 2-1/2 64 0.06 0,09 28 95 • Cover: Fiber braid.
821-6 3/8 10 0.63 15,9 300 2,1 3 76 0.09 0,13 28 95 • Temperature Range:
821-8 1/2 12,5 0.78 19,8 300 2,1 5 127 0.12 0,18 28 95 • Air: +158˚F (+70˚C)
821-10 5/8 16 0.91 23,0 250 1,7 6 152 0.19 0,28 28 95 • Water: +185˚F (+85˚C)
Oil: -40˚F to +212˚F
821-12 3/4 19 1.03 26,2 250 1,7 7 178 0.21 0,31 28 95 • (-40˚C to +100˚C).
Fittings
821FR B
Multipurpose – Fire Resistant Cover
Available Cover Colors: WHT BRN BLU GRN BLK
Part Working Minimum Vacuum Field lubricating oils and antifreeze
solutions.
inches Inner Tube: PKR®
Equipment
821FR-4 1/4 6,3 0.50 12,7 350 2,4 2-1/2 64 0.08 0,12 28 95 • Cover: Fire resistant fiber braid.
821FR-6 3/8 10 0.63 15,9 300 2,1 3 76 0.11 0,16 28 95 • Hose cover colors include: White,
821FR-8 1/2 12,5 0.78 19,8 300 2,1 5 127 0.12 0,18 28 95 • Brown, Blue, Green, and Black.
821FR-12 3/4 19 1.03 26,2 250 1,7 7 178 0.22 0,33 28 95 • Temperature Range: C
Air: +212˚F (+100˚C)
Water: +185˚F (+85˚C)
Oil: -40˚F to +212˚F
(-40˚C to +100˚C).
Accessories
831
Multipurpose – Heavy Duty
Available Cover Colors: RED BLU GRN BLK
petroleum base hydraulic fluid, D
Part Working Minimum Vacuum Field
solutions.
inches Inner Tube: Synthetic rubber.
831-4 1/4 6,3 0.50 12,7 350 2,4 2-1/2 65 0.09 0,13 28 95 • Cover: Synthetic rubber, MSHA
831-6 3/8 10 0.63 16 300 2,0 3 75 0.11 0,16 28 95 • accepted.
831-8 1/2 12,5 0.78 20 300 2,0 5 125 0.18 0,27 28 95 • Hose cover colors include:
Red, Blue, Green, and Black.
Technical
831-10 5/8 16 0.91 23 300 2,0 6 150 0.19 0,28 15 51 •

Temperature Range:
831-12 3/4 19 1.03 26 300 2,0 7 180 0.24 0,36 15 51 •
Air: +158˚F (+70˚C)
Water: +185˚F (+85˚C)
Oil: -40˚F to +212˚F
(-40˚C to +100˚C).
E
• Push-Lok is not recommended for any fuel, refrigerant, or for use in air conditioners and heat pump applications. Fittings: 82 Series - pg. B-156.
• Push-Lok is not recommended for applications where extreme pulsation is encountered.
• See Section B for Assembly Instructions.

Wickliffe, Ohio
Catalog 4400 US Transportation Hose
271, SS23CG, SS25UL
271
Transportation
Transportation – Air Brake Hose

D.O.T. FMVSS 106A
Hose
Application: Air brake systems.

A Part
Working
Pressure
Minimum
Bend Radius Weight Parkrimp
Reinforcement: One or more
fiber braid.
inch mm inch mm psi MPa inch mm lbs/ft kg/m 25 Series Cover: Synthetic Rubber.
271-6 3/8 10 0.75 19 225 1,6 1-3/4 45 0.20 0,30 • Temperature Range: -50°F to
271-8 1/2 12,5 0.88 22 225 1,6 2 50 0.26 0,39 • +212°F (-46°C to +100°C).
Fittings: 25 Series - B-6.
Fittings
SS23CG
Transportation – Compressed Natural Gas and Liquefied
B Petroleum Gas
CGA TYPE III, ECE110 CLASS 1
Application: Liquefied petroleum
gas (LPG), Compressed natural
Part Working Minimum gas (CNG).
inch mm inch mm psi MPa inch mm lbs/ft kg/m 26 Series Reinforcement: One steel braid.
SS23CG-6 5/16 8,0 0.68 17,2 425 3,0 4 100 0.16 0,24 • Cover: Synthetic rubber.
Equipment
SS23CG-8 13/32 10 0.77 19,5 425 3,0 4-1/2 115 0.17 0,25 • Temperature Range: -40°F to
SS23CG-10 1/2 12,5 0.92 23,4 425 3,0 5-1/2 140 0.28 0,42 • +250°F (-40°C to +121°C).
FACTORY MADE HOSE ASSEMBLIES ONLY. Contact Hose Products Division for more information. Fittings: 26 Series - pg. B-9.
C
SS25UL
Transportation – Liquefied Petroleum Gas
UL STANDARD 21
Application: Liquefied petroleum
Accessories
gas (LPG).
Part Working Minimum Field Inner Tube: Synthetic rubber.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Attachable Reinforcement: One fiber braid
inch mm inch mm psi MPa inch mm lbs/ft kg/m 20/22 Series and one stainless steel wire braid.
SS25UL-4 3/16 5 0.52 13,2 350 2,4 0.75 20 0.11 0,16 •
D SS25UL-5 1/4 6,3 0.58 14,8 350 2,4 1 25 0.13 0,19 •
Cover: Fiber braid.
SS25UL-6 5/16 8 0.68 17,2 350 2,4 1-1/4 30 0.18 0,27 • +250°F (-40°C to +121°C).
SS25UL-8 13/32 10 0.77 19,5 350 2,4 1-3/4 45 0.21 0,31 • Fittings: 20 Series - pg. B-117.
SS25UL-10 1/2 12,5 0.92 23,4 350 2,4 2-1/4 55 0.29 0,43 •
SS25UL-12 5/8 16 1.08 27,4 350 2,4 2-3/4 70 0.37 0,55 •
Technical
E

Wickliffe, Ohio
293, 221FR
293
Transportation
Transportation – Air Brake Hose
SAE J1402 AI / D.O.T. FMVSS 106-AI-AIR BRAKE
Hose
hydraulic fluids and lubricating oils,
diesel fuels and antifreeze solutions.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight
Vacuum Field
Rating Parkrimp Attachable Inner Tube: PKR®. A
inches Reinforcement: One fiber braid.
inch mm inch mm psi MPa inch mm lbs/ft kg/m of Hg kPa 26 Series 21/23 Series
Cover: Abrasion resistant nylon
293-4 3/16 5 0.49 12,5 500 3,5 1/2 15 0.10 0,15 28 95 • • fiber braid.
293-6 5/16 8 0.62 15,7 500 3,5 1 25 0.15 0,22 28 95 • • Temperature Range: -58°F to
293-8 13/32 10 0.74 18,7 500 3,5 1-1/2 40 0.18 0,27 28 95 • • +302°F (-50°C to +150°C).
293-10 1/2 12,5 0.83 21,1 450 3,1 2 50 0.20 0,30 28 95 • • Fittings: 26 Series - pg. B-9.
293-12 5/8 16 0.96 24,3 450 3,1 2-1/2 65 0.22 0,33 28 95 • • 21 Series - pg. B-127.
• •
Fittings
293-16 7/8 22 1.21 30,6 450 3,1 3-1/4 80 0.25 0,37 20 68
221FR B
Transportation – Marine Fuel and Engine Hose
SAE J1527 TYPE A CLASS I, USCG SAE J1942
Application: Gasoline, ethanol

blends, diesel fuels, petroleum base
Part Working Minimum Vacuum Field hydraulic fluids, and lubricating oils.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Rating Parkrimp Attachable Inner Tube: Synthetic rubber.
Equipment
inches Reinforcement: One braid steel
inch mm inch mm psi MPa inch mm lbs/ft kg/m of Hg kPa 26 Series 20/22 Series wire.
221FR-5 1/4 6,3 0.58 15 500 3,5 1 25 0.19 0,28 24 81 • • Cover: Synthetic rubber, blue.
221FR-6 5/16 8 0.68 17 500 3,5 1-1/4 30 0.23 0,34 24 81 • • Temperature Range: -4°F to
221FR-8 13/32 10 0.77 20 500 3,5 1-3/4 45 0.28 0,42 24 81 • • +212°F (-20°C to +100°C). C
221FR-10 1/2 12,5 0.92 23 500 3,5 2-1/4 55 0.39 0,58 20 68 • • Fittings: 26 Series - pg. B-9.
221FR-12 5/8 16 1.08 27 500 3,5 2-3/4 70 0.41 0,61 20 68 • • 20 Series - pg. B-117.
221FR-16 7/8 22 1.23 31 500 3,5 3-1/2 90 0.47 0,70 20 68 • •
ISO 7840 with 26 Series fittings ONLY.
Accessories
D
Technical
E

Wickliffe, Ohio
213, 266
213
Transportation
Transportation
SAE J1402 AI / D.O.T. FMVSS 106 AI - AIR BRAKE
Hose

Part Working Minimum Vacuum Field oils, diesel fuels and antifreeze
A Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Rating Parkrimp Attachable
inches
solutions.
Inner Tube: PKR®.
inch mm inch mm psi MPa inch mm lbs/ft kg/m of Hg kPa 26 Series 21/23 Series Reinforcement: One fiber braid
213-4 3/16 5 0.49 12,5 2000 14 3/4 20 0.12 0,18 28 95 • • and one steel braid.
213-5 1/4 6,3 0.55 14 1500 10,5 1 25 0.14 0,21 28 95 • • Cover: Fiber braid.
213-6 5/16 8 0.62 16 1500 10,5 1-1/4 30 0.17 0,25 28 95 • • Temperature Range: -50°F to
213-8 13/32 10 0.74 19 1250 8,7 1-3/4 45 0.20 0,30 28 95 • • +302°F (-45°C to +150°C).
213-10 1/2 12,5 0.83 21 1000 7 2-1/4 55 0.22 0,33 28 95 • • Fittings: 26 Series - pg. B-9.
213-12 5/8 16 0.96 24 750 5,2 2-3/4 70 0.24 0,36 28 95 • •
Fittings

213-16 7/8 22 1.21 31 400 2,8 3-1/2 90 0.30 0,45 20 68 • •
213-20 1-1/8 29 1.49 38 300 2,1 4-1/2 115 0.44 0,65 20 68 • •
B 213-24 1-3/8 35 1.73 44
213-32 1-13/16 46 2.14 54
300
200
2,1 7-1/2
1,4 14
190
355
0.52 0,77
0.67 1,00
15
11
51
37
•
•
•
•
266
Transportation
SAE J1402 AII / D.O.T. FMVSS 106 AII - AIR BRAKE
Equipment

solutions.
C
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Rating Parkrimp Attachable
inches Inner Tube: PKR®.
266-4 3/16 5 0.52 13,2 2000 14 3/4 20 0.15 0,22 28 95 • • and one steel braid.
266-5 1/4 6,3 0.58 14,8 1500 10,5 1 25 0.16 0,24 28 95 • • Cover: Fiber braid.
266-6 5/16 8 0.68 17,2 1500 10,5 1-1/4 30 0.23 0,34 28 95 • • Temperature Range: -55°F to
+302°F (-48°C to +150°C).
266-8 13/32 10 0.77 19,5 1250 8,7 1-3/4 45 0.26 0,39 28 95 • •
266-10 1/2 12,5 0.92 23,4 1250 8,7 2-1/4 55 0.38 0,56 28 95 • • 20 Series - pg. B-117.
Accessories
266-12 5/8 16 10.8 27,4 750 5,2 2-3/4 70 0.42 0,63 20 68 • • 22 Series - pg. B-135.
266-16 7/8 22 1.24 31,4 400 2,8 3-1/2 90 0.48 0,71 15 51 • •
266-20 1-1/8 29 1.50 38,4 300 2,1 4-1/2 115 0.51 0,76 15 51 • •
266-24 1-3/8 35 1.75 44,5 250 1,7 5-1/2 140 0.68 1,01 11 37 • •
D
Technical
E
• See page E-5 for charted effects temperature has on maximum working pressures of 201, 206, 213, and 266 hose.

Wickliffe, Ohio
201, 206
201
Transportation
Transportation
SAE 100R5 SAE J1402 AII, D.O.T. FMVSS 106 AII - AIR BRAKE
Hose
Part Hose Working Minimum Vacuum Field oils, diesel fuels and antifreeze
Number Hose I.D. O.D. Pressure Bend Radius Weight Rating Parkrimp Attachable
inches
solutions.
A
201-4 3/16 5 0.52 13 3000 21 3 75 0.15 0,22 28 95 • • and one steel braid.
201-5 1/4 6,3 0.58 15 3000 21 3-3/8 85 0.18 0,27 28 95 • • Cover: Fiber braid.
201-6 5/16 8 0.68 17 2250 15,7 4 100 0.23 0,34 28 95 • • Temperature Range: -40°F to
+302°F (-40°C to +150°C).
201-8 13/32 10 0.77 20 2000 14 4-1/2 115 0.27 0,40 28 95 • •
201-10 1/2 12,5 0.92 23 1750 12,2 5-1/2 140 0.37 0,55 28 95 • • 20 Series - pg. B-117.
201-12 5/8 16 1.08 27 1500 10,5 6-1/2 165 0.40 0,60 28 95 • • 22 Series - pg. B-135.
Fittings
201-16 7/8 22 1.23 31 800 5,6 7-3/8 185 0.46 0,68 20 68 • •
201-20 1-1/8 29 1.50 38 625 4,3 9 230 0.51 0,76 20 68 • •
201-24 1-3/8 35 1.75 44 500
201-32 1-13/16 46 2.22 56 350
3,5 10-1/2 265
2,4 13-1/4 335
0.68 1,01
0.89 1,32
15
11
51
37
•
•
•
•
B
201-40 2-3/8 60 2.88 73 350 2,4 24 610 1.31 1,95 11 37 • •
201-48 3 76 3.56 90 200 1,4 33 840 2.09 3,11 11 37 •
206
Transportation
Equipment
SAE 100R5 SAE J1402 AII, D.O.T. FMVSS 106 AII - AIR BRAKE
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight
Vacuum Field
Rating Parkrimp Attachable
oils, diesel fuels and antifreeze
solutions. C
inches Inner Tube: PKR . ®
206-5 1/4 6,3 0.58 15 3000 21 3-3/8 85 0.18 0,27 28 95 • • Cover: Fiber braid, blue.
206-6 5/16 8 0.68 17 2250 15,7 3-1/2 90 0.23 0,34 28 95 • • Temperature Range: -55°F to
+302°F (-48°C to +150°C).
206-8 13/32 10 0.77 20 2000 14 3-1/2 90 0.27 0,40 28 95 • •
Accessories
206-10 1/2 12,5 0.92 23 1750 12,2 4 100 0.37 0,55 28 95 • • 20 Series - pg. B-117.
206-12 5/8 16 1.08 27 1500 10,5 4 100 0.40 0,60 28 95 • • 22 Series - pg. B-135.
206-16 7/8 22 1.23 31 800 5,6 4 100 0.46 0,68 20 68 • •
206-20
206-24
1-1/8
1-3/8
29 1.50 38
35 1.75 44
625 4,3
500 3,5
5-1/2
7-1/2
140 0.51 0,76
190 0.68 1,01
20
15
68
51
•
•
•
• D
206-32 1-13/16 46 2.22 56 350 2,4 13-1/4 335 0.89 1,32 11 37 • •
206-40 2-3/8 60 2.88 73 350 2,4 24 610 1.31 1,95 11 37 • •
Technical
E
• See page E-5 for charted effects temperature has on maximum working pressures of 201, 206, 213, and 266 hose.

Wickliffe, Ohio
225
225
Transportation
Transportation
SAE 100R5 Performance with Rubber Cover
Hose

A Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Rating Parkrimp Attachable
inches
solutions.
225-5 1/4 6,3 0.58 15 3000 21 3-3/8 85 0.18 0,27 28 95 • • Cover: Synthetic rubber, MSHA
accepted.
225-6 5/16 8 0.68 17 2250 15,7 4 100 0.23 0,34 28 95 • • Temperature Range: -40°F to
225-8 13/32 10 0.77 20 2000 14 4-1/2 115 0.27 0.4 28 95 • • +212°F (-40°C to +100°C).
225-10 1/2 12,5 0.92 23 1750 12,2 5-1/2 140 0.37 0,55 28 95 • • Fittings: 26 Series - pg. B-9.
225-12 5/8 16 1.08 27 1500 10,5 6-1/2 165 0.40 0,60 28 95 • • 20 Series - pg. B-117.
Fittings

225-16 7/8 22 1.23 31 800 5,6 7-3/8 185 0.46 0,68 20 68 • •
225-20 1-1/8 29 1.50 38 625 4,3 9 230 0.51 0,76 20 68 • •
B 225-24 1-3/8
225-32 1-13/16 46
35 1.75 44
2.22 56
500
350
3,5 10-1/2 265 0.68 1,01
2,4 13-1/4 335 0.89 1,32
15
11
51
37
•
•
•
•
Equipment
C
Accessories
D
Technical
E

Wickliffe, Ohio
Catalog 4400 US Refrigerant Hose
285, 244
285
Refrigerant
Refrigerant
SAE J2064 TYPE C
Application: Refrigerant 134a.
Hose
Inner Tube: Synthetic rubber
Part Working Minimum Vacuum Field with nylon barrier.
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Rating
inches
Parkrimp Attachable Reinforcement: One fiber braid. A
inch mm inch mm psi MPa inch mm lbs/ft kg/m of Hg kPa 26 Series 21/23 Series Cover: Synthetic rubber.
285-4 3/16 5 0.49 11,7 500 3,4 1 25 0.09 0,14 28 95 • • Temperature Range: -22°F to
+257°F (-30°C to +125°C).
285-6 5/16 8 0.62 15,7 500 3,4 1-1/2 40 0.12 0.18 28 95 • •
285-8 13/32 10 0.74 18,8 500 3,4 2 50 0.17 0.25 28 95 • • Fittings: 26 Series - pg. B-9.
285-10 1/2 12,5 0.83 21,1 500 3,4 2-1/2 65 0.18 0.27 28 95 • • 23 Series - pg. B-139.
285-12 5/8 16 0.96 24,4 500 3,4 3 75 0.23 0.34 28 95 • •
Fittings
244
Refrigerant B
SAE J2064 TYPE B, CLASS I
Application: Refrigerant 134a.
Inner Tube: Butyl rubber.
Part Working Minimum Vacuum
Reinforcement: One braid steel
Number Hose I.D. Hose O.D. Pressure Bend Radius Weight Rating Parkrimp wire.
inches
inch mm inch mm psi MPa inch mm lbs/ft kg/m of Hg kPa 26 Series Cover: Fiber braid.
Equipment
244-16 7/8 22 1.23 31 500 3,5 7-1/2 190 0.51 0,76 28 95 • Temperature Range: -22°F to
+257°F (-30°C to +125°C).
244-20 1-1/8 29 1.50 38 500 3,5 9 230 0.56 0,83 28 95 •
244-24 1-3/8 35 1.75 44 350 2,4 10-1/2 270 0.62 0,92 28 95 • Fittings: 26 Series - pg. B-9.
Accessories
D
Technical
E

Wickliffe, Ohio
Catalog 4400 US
Notes
Refrigerant
Hose
A
Fittings
B
Equipment
C
Accessories
D
Technical

Wickliffe, Ohio

Catálogo Mangueras PARKER

Uploaded by

Copyright:

Available Formats

Catálogo Mangueras PARKER

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catálogo Mangueras PARKER

Uploaded by

Copyright:

Available Formats

Visual Index

Suction and Return

601 A-8 422 A-8 424 A-8

Super Tough- Compact - High

304 A-11 301LT A-12 451TC A-12 451ST A-12

B Low Temperature Tough Cover

Worldwide Tough Cover Super Tough

472TC A-13 351TC A-14 351ST A-14 721 A-14

Tough Cover Tough Cover

Extreme Tough Cover

D 782TC A-16 782ST A-16 701 A-17 731 A-17

Tough Cover Super Tough

Extreme Tough Cover

A-2 Hose Products Division

811 A-20 811HT A-20 881 A-21

A-3 Hose Products Division

How to Read the Hose Section

B Hose Working Pressure

stances where it is a critical

���������� ��� �� ���� �� ���� ���� ����� �� ��� ���� ���������������������������������

����������� ��� �� ���� �� ���� ���� � ��� ��� ����

How to Order Crimped Hose Assemblies

Box 3: 1st Fitting End Conﬁguration

Symbol Description Box 10: Displacement Angle

A-5 Hose Products Division

How to Order Field Attachable Hose Assemblies

Box 1: Preﬁx Box 7: Hose Size

C Box 3: 1st Fitting End Conﬁguration

06 = 3/8” JIC (9/16x18 Thread)

Box 6: 2nd Fitting End Connection Size SG = Spring Guard

A-6 Hose Products Division

Working Pressure (psi) Standard

881 with HC 2-braids, 1-spiral wire 100 70 50 50 50 62 –40/+257 100R4 A-21

A-7 Hose Products Division

hydraulic ﬂuids and lubricating

A Number Hose I.D.

A-8 Hose Products Division

Part Working Minimum

AX12 3/4 19 1.01 26 1250 8,7 4-3/4 120 0.34 0,51 •

A-9 Hose Products Division

Part Working Minimum Field Application: Petroleum base

C Application: Petroleum base

A-10 Hose Products Division

304-32 2 51 2.64 67 1125 7,8 25 630 1.99 2,96 •

A-11 Hose Products Division

SAE 100R2 TYPE AT

hydraulic ﬂuids and lubricating

Application: Petroleum base

• See Section C for Parkrimp Assembly Instructions.

A-12 Hose Products Division

A-13 Hose Products Division

Constant Working Pressure

+212°F (-40°C to +100°C).

SAE 100R12 / ISO 3862-1 TYPE R12 / EN 856 TYPE R12

C Number Hose I.D.

721/721TC-24 1-1/2 38 2.07 53 2500 17,5 10 250 2.01 2,99 •

• See Section C for Parkrimp Assembly Instructions.

A-14 Hose Products Division

A-15 Hose Products Division

SAE 100R13 / ISO 3862-1 TYPE R13 / EN856 TYPE R13

��

��