Ratemeter / Totalizer

INTELLECT-69 From Analog Inputs

Features
• High/Low Scaling From Front Panel
• 2 Set Points Assignable To Rate or Total
• Display Rate, Integrated Total and Peak &
Valley
• 0-5V, 0-10V, 1-5V, 4-20mA or 0-20mA
Analog Input
RATEMETERS/TOTALIZERS

• NEMA 4X/IP 65 Front Panel

• +24V Output Power For Peripherals
Flow Instruments

• RS422/232 Serial Communications (optional)

• 4-20mA Output (optional)
• Square Root Extraction (optional)
• Rate Per Day Feature (optional)

Description: Listing: CE Compliant, CSA Listed (File No. LR91109),

Featuring 6 digits of bright, 7-segment LED displays, the NRTL/C pending
Intellect-69 is an integrating totalizer/ratemeter which accepts Calibration: The unit does all of the calibrations internally. There
analog signal inputs. The unit can be field programmed to are no potentiometers to adjust and the unit never needs to be
accept 4-20mA, 0-20mA, 0-5V, 0-10V or 1-5V signals. An removed from the case.
optional Square Law input is available for inputs that require Control Outputs:
square root extraction. A 4-20mA output option is available to Standard: Open collector sinks 250mA from 30VDC when
control strip recorders or to transmit linear signal other active.
peripherals. Two assignable set points are standard. The high Optional: 2 each Form C SPDT 5 Amp @ 120/240 VAC or 28
and low scaling settings are programmable from the front panel. VDC.
By pressing the "view" button, the unit will display: integrated Set Points: The two control set points can be set at any number
total, rate, peak or valley. Press the "lock" key once to freeze from 0 to 59999. The set point outputs can be assigned to rate or
the display. RS422 or RS232 serial communications are total. The unit comes standard with two open collector control
available options for data communication with a host computer. outputs. Two 5 Amp, Form C relays are optional. The outputs are
Specifications: programmable from .01 to 599.99 sec or latched until reset when
Display: 6 digit, .55" high, 7 segment, red orange, LED. assigned to the total and a hysteresis (alarm range) when
Input Power: 110, 220 VAC ± 15% or 12 to 24VDC. assigned to the rate.
Current: max. 300mA DC or 10.0VA (10W) at rated AC voltage. Rate Display: Updates 2 times per second, Accurate to 4.5 digits.
Output Power: (AC powered units only) + 24VDC @ 50mA Set "low" greater than "high" for inverted display (LINEAR ONLY).
regulated ±5% (100 mA available on request) A user programmable low cutoff inhibits indications at low flow
Temperature: rates.
Operating: +41°F (5°C) to +130°F (+54°C). Totalizer: Integrates from the rate reading and accumulates up to
Storage: -40°F (-40°C) to +200°F (93°C). 6 digits of total count. A totalizer divider allows the total to be
Humidity: 0-90% Noncondensing divided by 1, 10, 100 or 1000. This feature is especially useful for
Memory: EEPROM stores data for ten years if power is lost. users who deal with high total volumes.
Reset: Analog Output: The unit can be ordered with an optional 4-20mA
Front Panel: resets displayed values and control outputs. output which is proportional to the rate display. The high and low
Remote: 4-30VDC positive edge, resets totalizer and control settings are programmable from the front panel. Set "low" greater
outputs. than "high" for inverted output. A sinking driver generates a
Input: corresponding linear current through the external devices. The
Standard: Linear 4-20mA, 0-20mA, 0-5V, 0-10V or 1-5V output updates with each update of the rate. Accuracy is ±.25% FS
selectable from the front panel. worst case. Compliance voltage must be 3 to 30 VDC non
Optional: Square Law 4-20mA, 0-20mA, 0-5V, 0-10V or 1-5V is inductive. (The unit can provide the DC source as long as the drop
available for inputs that require square root extraction. across the devices being driven does not exceed 21V).
Input Impedance: Current: 100Ω; Voltage: 115KΩ
Overvoltage Protection: 50 V
Overcurrent Protection: 50 mA
Resolution: 14.5 Bits

Page 44 • Flow Instruments • F-15 Kessler-Ellis Products • 800-631-2165

Programming: Decimal points, Scaling from 0 to 59999 Dimensions:
units per selected time base, set points, input type, security 4.35
lock code, and assigning outputs are all programmable from 0.6 (110.5)
(15)
the front panel.
Housing: Standard 1/8 DIN, high impact ABS plastic case
(NEMA 4X/IP65 front panel).
Shipping Weight: 2 lbs.
Accuracy:
RANGE % FS ERROR % FS ERROR CUSTOMER PANEL
(worst case) (typical) GASKET
Panel Thickness 0.062" (1.5)
to 0.187" (4.7) max.

0-20 mA 0.1% .05% 3.93

4-20 mA 0.1% .05% (99.8)
0-10 VDC 0.2% 0.1%
0-5 VDC .25% .15%
1-5 VDC .25% .15%

RATEMETERS/TOTALIZERS
Square Law: (above 5% of bottom range) 0.1%

Flow Instruments
(5V inputs .4%) Worst case over complete range: 2%

Temperature Stability: Will not drift more than 20 parts

per million per °C from 5°C to 54°C
4.44
(112.7)
WIRING: 1•Reset In
2•Analog Out (Sink)
3•Signal GRD (-DC)

(66.8)
2.63
4•(Current) +I in
5•(Voltage) +V in
6•Not Used
7•+24V Out
8•Preset B Collector
9•Preset A Collector
10•+DC In
11•110/220 VAC 3.62
12•110/220 VAC (92)
13•Common
14•N.C. Relay A

1.77
(45)
15•N.O.
16•Common
17•N.C. Relay B
18•N.O.

2-Wire 4-20mA Transmitter Ordering Information

•3 - Signal GND (-DC)

Example: INT69RT A L 1 A C1
•4 - I In + (Current)

Series:
•7 - +24V Out

INT69RT= Ratemeter / Totalizer

•12 - A C In
•11 - A C In

INT69R= Ratemeter Only

INT69T= Totalizer Only
- Operating Voltage:
+ A= 110 VAC ± 15% or 12 to 24 VDC
.
.

B= 220 VAC ± 15% or 12 to 24 VDC

110 VAC Inputs:
60/50 Hz L= Linear (standard)
S= Square Law (optional)
Flowmeter Control outputs:
(4-20mA Transmitter) 1= 2 - Open Collector Outputs (standard)
2= 2 - 5 Amp Form C Relays (optional)
• 3 - Signal GND (-DC)

3-Wire 0-10V Transmitter

Options (Multiple Options Available)
• 5 - V In + (Voltage)

A= Analog Output (4-20 mA)

D= Rate per Day, Hour or Minute
• 7 - +24V Out

• 12 - A C In
• 11 - A C In

C1= RS 232 communications

C2= RS 422 communications

Accessories
.
.

- Separate non keyboard panel order #34235

Separate keyboard panel - order #34234
signal 110 VAC NEMA 4X wall mount enclosure available, see NEMA-1/8DIN
+ 60/50 Hz XHV 7/4 Explosion Proof Housing available, see XHV7/4
Serial printer available, see P1000, P295
Flowmeter Ethernet Port Server available, see IEPS
(0-10 V Transmitter) RS-422/485 to RS-232 Communication Adaptor available, see CA285

Kessler-Ellis Products • 800-631-2165 F-15 • Flow Instruments • Page 45