Types of Topologies

There are mainly eight types of topologies in computer networks:

1. Mesh Topology
2. Star Topology
3. Bus Topology
4. Ring Topology
5. Hybrid Topology
6. Tree Topology
7. P2P Topology
8. Daisy Chain Topology

Mesh Topology
In mesh topology each device is connected to every other device on the network
through a dedicated point-to-point link. When we say dedicated, it means that the
link only carries data for the two connected devices only. Let’s say we have n
devices in the network then each device must be connected with (n-1) devices of
the network. Number of links in a mesh topology of n devices would be n(n-1)/2.

There are two types of Mesh topology:

1. Full Mesh Topology: In this topology each device is connected to all

the devices available on the network.
2. Partial Mesh Topology: In partial mesh topology, each device is
connected to only those devices, to which they communicate
frequently. This reduces redundant links and saves the setup cost.

Advantages of Mesh topology

1. No data loss: No data traffic issues as there is a dedicated link between two
devices which means the link is only available for those two devices.
2. Reliable: Mesh topology is reliable and robust as failure of one link doesn’t
affect other links and the communication between other devices on the network.
3. Secure: Mesh topology is secure because there is a point to point link thus
unauthorized access is not possible.
4. Easy to troubleshoot: Fault detection is easy as there is a separate
connection between each devices.
5. Fast communication: As there is a dedication connection between two
devices on a network, the communication is fast.

Disadvantages of Mesh topology

1. Amount of wires required to connected each system is tedious and headache.
2. Since each device needs to be connected with other devices, number of I/O
ports required must be huge.
3. Scalability issues because a device cannot be connected with large number of
devices with a dedicated point to point link.
Star Topology

In star topology each device in the network is connected to a central device

called hub. Unlike Mesh topology, star topology doesn’t allow direct
communication between devices, a device must have to communicate through
hub.

If one device wants to send data to other device, it has to first send the data to
hub and then the hub transmit that data to the designated device.

The central device is known as hub and other devices connected to hub are

called clients. Generally Coaxial cable or RJ-45 cables  are used to connect the
clients to the hub.

Advantages of Star topology

 Less expensive: Less expensive because each device only need
one I/O port and needs to be connected with hub with one link.
 Easier to install
 Cost effective: Less amount of cables required because each device
needs to be connected with the hub only.
 Robust: If one link fails, other links will work just fine.
 Easy to troubleshoot: Easy fault detection because the link can be
easily identified.
  Reliable: Each device is separately connected to the hub, so a
connection failure between a device and hub doesn’t affect the
connection of the other devices.

Disadvantages of Star topology

 If hub goes down everything goes down, none of the devices can
work without hub.
 Hub requires more resources and regular maintenance because it is
the central system of star topology.
 Not Scalable: There is a limit to add new devices as each device
increase the load on the central unit (hub or switch). This is why it is
not suitable for the large networks.

Bus Topology

In bus topology there is a main cable, and all the devices are connected to this
main cable through drop lines. There is a device called tap that connects the
drop line to the main cable. Since all the data is transmitted over the main cable,
there is a limit of drop lines and the distance a main cable can have.

 The main cable that is connected to the devices on the network using
drop line is called backbone cable.
 The main cable broadcast the message to all the devices connected
to it.
 When a device wants to send a message, it transmits the message
to the backbone cable. All the other devices connected to the
backbone cable receive the message whether they are intended to
receive the message or not.
  The most common access method of the bus topologies
is CSMA (Carrier Sense Multiple Access). This method is used to
prevent the collision of data as two or more devices can send the
data to main cable at the same time.

CSMA: This method is developed to decrease the chance of collisions when two

or more devices start sending the signal at the same time.

CSMA CD (Carrier Sense Multiple Access with Collision Detection): In this

method, a device monitors the transmission medium after it sends the data to
see if the transmission was successful. If successful, the device marks the
communication successful else it sends the data again.
CSMA CA (Carrier Sense Multiple Access with Collision Avoidance): This
method tries to prevent the collision from happening. In this method, before
sending the data, the device checks the transmission medium to see if it is busy
or not. If busy, then the sender device waits until the transmission medium
becomes idle.

Advantages of bus topology

 Easy installation, each cable needs to be connected with backbone
cable.
 Less Expensive: Less cables are required than Mesh and star
topology
 Limited failure: The connection failure of one device doesn’t affect
the connections of other devices on network.

Disadvantages of bus topology

 Difficultly in fault detection.
 Not scalable as there is a limit of how many nodes you can connect
with backbone cable.
 Difficult to troubleshoot: It is difficult to identify the cause of failure.
 Data collision: When two or more devices send the data
simultaneously then there is a chance of data collision. However this
can be solved by implementing CSMA techniques that we discussed
above.
Ring Topology

In ring topology each device is connected with the two devices on either side of
it. There are two dedicated point to point links a device has with the devices on
the either side of it. This structure forms a ring thus it is known as ring topology.

If a device wants to send data to another device, then it sends the data in one
direction, each device in ring topology has a repeater, if the received data is
intended for other device then repeater forwards this data until the intended
device receives it.

 Data flow is unidirectional in ring topology.

 This topology doesn’t have any end points as nodes are connected in
circular fashion.
 The data transfers in ring topology in clockwise direction.
 The popular access method used in ring topology is token passing
method. The word token describes segment of data send through the
network. There are multiple tokens available on the network, the
device that successfully acquires the token attaches the data to the
token. The device that successfully decodes the token, receives the
data.

Advantages of Ring Topology

 Easy to install.
 Managing is easier as to add or remove a device from the topology
only two links are required to be changed.
  Less expensive: Generally Twisted pair cabling is used in ring
topology which is inexpensive and easily available.
 Easy maintenance: The network in ring topology is easy to maintain
as a system failure doesn’t affect other systems on network, the failed
system can be easily removed and installed again after fixing the
issue.

Disadvantages of Ring Topology

 A link failure can fail the entire network as the signal will not travel
forward due to failure.
 Data traffic issues, since all the data is circulating in a ring.

Hybrid topology

A combination of two or more topology is known as hybrid topology. For example

a combination of star and bus topology is known as star bus hybrid topology, this
topology is shown in the above diagram.

Advantages of Hybrid topology

 We can choose the topology based on the requirement for example,
scalability is our concern then we can use star topology instead of
bus technology.
 Scalable as we can further connect other computer networks with the
existing networks with different topologies.
Disadvantages of Hybrid topology
 Fault detection is difficult.
 Installation is difficult.
 Design is complex so maintenance is high thus expensive.

Tree topology

 Tree topology is an example of hybrid topology as it is a

combination of star topology and bus topology that forms a tree
like structure.
 The devices are connected to each other in hierarchical manner.
Each node has arbitrary number of child nodes. The device at the top
of the hierarchy is known as root node and other devices that are
lower in hierarchy known as descendants of the root node.
 There is a single path between two devices and this is the path of the
communication between devices.
 Tree topology is also called star-bus topology.

Advantages of Tree topology

 Easy error detection.
 Expendable: It is easy to add new devices to the network in tree
topology.
 Easy maintenance: Devices are grouped in small star networks and
these star networks are connected to each other using bus topology.
It is easy to manage a device in small star network.
 Reliable: One system failure doesn’t bring the whole network down.
The failed system can be easily managed.
  Supports broadband transmissions: It supports broadband
transmission that is reason this topology is frequently used in
corporate networks.

Disadvantages of Tree topology

 Cost: Cost of broadband transmission is high.
 Dependant on backbone cable of bus topology: All the devices
connected in star networks are connected with other devices using
backbone cable of bus topology. Failure in this main cable can affect
the whole network.

P2P (Peer to Peer) Topology

In Peer to Peer topology, two devices are connected to each other directly. There
is no client and server in P2P topology as both the devices serve the purpose of
client and server both. Torrent is an example of P2P topology as one
computer can download the data as well as upload the data to another computer.

In P2P, these two devices can be two computers, routers, switches etc. The
client is the computer that requests the data and server is the computer that
serves the request by sending data. In P2P, both the devices can request as well
as send the data.

Con: The biggest disadvantage of P2P network is the security. A computer

connected to another computer using P2P can read and write the data on the
computer.
Daisy Chain Topology

In Daisy Chain Topology, all devices are connected in a linear fashion. Consider
it as a ring topology where the last device is not connected to the first device.
Every device in the daisy chain network is connected to immediate left and
right neighbour devices, except the first and last device.

The intermediate device helps in propagating the signal by relaying it until it

reaches the destination. Consider ring topology as an advanced version of this
topology, by joining first and last devices in this topology a ring topology can be
formed.

The advantages ring topology has over daisy chain are:

 If there is a failure in ring network, it can send the data through

alternate path. For example, if the signal is transmitting clockwise and
there is a failure, the signal can still reach destination by sending the
signal in reverse direction.
 Since signal flows in a loop, there is less need of transmitters and
receivers so their count can be reduced to lessen the cost.